daemon/images/image_squash.go:17:71: empty-lines: extra empty line at the start of a block (revive)
daemon/images/store.go:128:27: empty-lines: extra empty line at the end of a block (revive)
daemon/images/image_list.go:154:55: empty-lines: extra empty line at the start of a block (revive)
daemon/images/image_delete.go:135:13: empty-lines: extra empty line at the end of a block (revive)
daemon/images/image_search.go:25:64: empty-lines: extra empty line at the start of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 05042ce472)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 52c1a2fae8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The LoopkupImage method is only used by the inspect image route and
returns an api/type struct. The depenency to api/types of the
daemon/images package is wrong, the daemon doesn't need to know about
the api types.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Use the default (0) value to indicate "not set", which simplifies
working with these configuration options, preventing the need to
use intermediate variables etc.
While changing this code, also making some small cleanups, such
as replacing "fmt.Sprintf()" for "strconv" variants.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were only exported to facilitate ImageService.GetRepository() (used for
the `GET /distribution/{name:.*}/json` endpoint.
Moving the core functionality of that to the distribution package makes it
more consistent with (e.g.) "pull" operations, and allows us to keep more things
internal.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
All other endpoints handle this in the API; given that the JSON format for
filters is part of the API, it makes sense to handle it there, and not have
that concept leak into further down the code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move the default to the service itself, and produce the correct status code
if an invalid limit was specified. The default is currently set both on the
cli and on the daemon side, and it should be only set on one of them.
There is a slight change in behavior; previously, searching with `--limit=0`
would produce an error, but with this change, it's considered the equivalent
of "no limit set" (and using the default).
We could keep the old behavior by passing a pointer (`nil` means "not set"),
but I left that for a follow-up exercise (we may want to pass an actual
config instead of separate arguments, as well as some other things that need
cleaning up).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The DefaultService was not really meant to be used outside of the package, so
un-export it, and change NewService()'s signature to return a Service interface.
To un-export this type, a test in daemon/images was updated to not use DefaultService,
but now using the registry.Service interface itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes the function a bit more idiomatic, and leaves it to the caller to
decide wether or not the error can be ignored.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes some of the checks that were added in 0cba7740d4,
but should no longer be needed.
- `ImageService.ImageDelete()`: no need to validate image platform to delete it.
- `ImageService.ImageHistory()`: no need to validate image platform to show its
history; if it made it into the local image cache, it should be valid.
- `ImageService.ImportImage()`: `dockerfile.BuildFromConfig()` is used for
`docker (container) commmit` and `docker (image) import`. For `docker import`,
it's more transparent to perform validation early.
- `ImageService.LookupImage()`: no need to validate image platform to inspect it;
if it made it into the local image cache, it should be valid.
- `ImageService.SquashImage()`: same. This code was actually broken, because it
wrapped an `err` that was always `nil`, so would never return an error.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
None of the implementations used return an error, so removing the error
return can simplify using these.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 0380fbff37 added the ability to pass a
--platform flag on `docker import` when importing an archive. The intent
of that commit was to allow importing a Linux rootfs on a Windows daemon
(as part of the experimental LCOW feature).
A later commit (337ba71fc1) changed some
of this code to take both OS and Architecture into account (for `docker build`
and `docker pull`), but did not yet update the `docker image import`.
This patch updates the import endpoitn to allow passing both OS and
Architecture. Note that currently only matching OSes are accepted,
and an error will be produced when (e.g.) specifying `linux` on Windows
and vice-versa.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These logs were meant to be logged when starting the daemon. Moving the logs
to the daemon startup code (which also prints similar messages) instead of
having the images service log them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This interface only had a single implementation (xfer.LayerDownloadManager),
and all places where it was used already imported the xfer package.
Removing the interface, also makes it a closer match to the "upload" part,
as `xfer.LayerUploadManager()` did not use an interface.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This makes it easier to add more options to the backend without having to change
the signature.
While we're changing the signature, also adding a context.Context, which is not
currently used, but probably should be at some point.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
- Rename image summary constructor
- Rename `newImage` into `newImageSummary`, since the returned type is
`*types.ImageSummary`
- Rename variables for clarity
- Rename `newImage` into `summary`, since the variable type is
`*types.ImageSummary`
- Rename `imagesMap` into `summaryMap`, since the value type
contained is `*types.ImageSummary`
- Only compute `DiffSize` when more than 1 reference to the layer
exists, since it is not used otherwise
- Move variable declarations closer to where they are used
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
This takes the same approach as was implemented on `docker build`, where a warning
is printed if `FROM --platform=...` is used (added in 399695305c)
Before:
docker rmi armhf/busybox
docker pull --platform=linux/s390x armhf/busybox
Using default tag: latest
latest: Pulling from armhf/busybox
d34a655120f5: Pull complete
Digest: sha256:8e51389cdda2158935f2b231cd158790c33ae13288c3106909324b061d24d6d1
Status: Downloaded newer image for armhf/busybox:latest
docker.io/armhf/busybox:latest
With this change:
docker rmi armhf/busybox
docker pull --platform=linux/s390x armhf/busybox
Using default tag: latest
latest: Pulling from armhf/busybox
d34a655120f5: Pull complete
Digest: sha256:8e51389cdda2158935f2b231cd158790c33ae13288c3106909324b061d24d6d1
Status: Downloaded newer image for armhf/busybox:latest
WARNING: image with reference armhf/busybox was found but does not match the specified platform: wanted linux/s390x, actual: linux/arm64
docker.io/armhf/busybox:latest
And daemon logs print:
WARN[2021-04-26T11:19:37.153572667Z] ignoring platform mismatch on single-arch image error="image with reference armhf/busybox was found but does not match the specified platform: wanted linux/s390x, actual: linux/arm64" image=armhf/busybox
When pulling without specifying `--platform, no warning is currently printed (but we can add a warning in future);
docker rmi armhf/busybox
docker pull armhf/busybox
Using default tag: latest
latest: Pulling from armhf/busybox
d34a655120f5: Pull complete
Digest: sha256:8e51389cdda2158935f2b231cd158790c33ae13288c3106909324b061d24d6d1
Status: Downloaded newer image for armhf/busybox:latest
docker.io/armhf/busybox:latest
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Wrap platforms.Only and fallback to our ignore mismatches due to empty
CPU variants. This just cleans things up and makes the logic re-usable
in other places.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In some cases, in fact many in the wild, an image may have the incorrect
platform on the image config.
This can lead to failures to run an image, particularly when a user
specifies a `--platform`.
Typically what we see in the wild is a manifest list with an an entry
for, as an example, linux/arm64 pointing to an image config that has
linux/amd64 on it.
This change falls back to looking up the manifest list for an image to
see if the manifest list shows the image as the correct one for that
platform.
In order to accomplish this we need to traverse the leases associated
with an image. Each image, if pulled with Docker 20.10, will have the
manifest list stored in the containerd content store with the resource
assigned to a lease keyed on the image ID.
So we look up the lease for the image, then look up the assocated
resources to find the manifest list, then check the manifest list for a
platform match, then ensure that manifest referes to our image config.
This is only used as a fallback when a user specified they want a
particular platform and the image config that we have does not match
that platform.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When pulling an image by platform, it is possible for the image's
configured platform to not match what was in the manifest list.
The image itself is buggy because either the manifest list is incorrect
or the image config is incorrect. In any case, this is preventing people
from upgrading because many times users do not have control over these
buggy images.
This was not a problem in 19.03 because we did not compare on platform
before. It just assumed if we had the image it was the one we wanted
regardless of platform, which has its own problems.
Example Dockerfile that has this problem:
```Dockerfile
FROM --platform=linux/arm64 k8s.gcr.io/build-image/debian-iptables:buster-v1.3.0
RUN echo hello
```
This fails the first time you try to build after it finishes pulling but
before performing the `RUN` command.
On the second attempt it works because the image is already there and
does not hit the code that errors out on platform mismatch (Actually it
ignores errors if an image is returned at all).
Must be run with the classic builder (DOCKER_BUILDKIT=0).
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows us to cache manifests and avoid extra round trips to the
registry for content we already know about.
dockerd currently does not support containerd on Windows, so this does
not store manifests on Windows, yet.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fixes a regression based on expectations of the runtime:
```
docker pull arm32v7/alpine
docker run arm32v7/alpine
```
Without this change, the `docker run` will fail due to platform
matching on non-arm32v7 systems, even though the image could run
(assuming the system is setup correctly).
This also emits a warning to make sure that the user is aware that a
platform that does not match the default platform of the system is being
run, for the cases like:
```
docker pull --platform armhf busybox
docker run busybox
```
Not typically an issue if the requests are done together like that, but
if the image was already there and someone did `docker run` without an
explicit `--platform`, they may very well be expecting to run a native
version of the image instead of the armhf one.
This warning does add some extra noise in the case of platform specific
images being run, such as `arm32v7/alpine`, but this can be supressed by
explicitly setting the platform.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This commit adds the image variant to the image.(Image) type and
updates related functionality. Images built from another will
inherit the OS, architecture and variant.
Note that if a base image does not specify an architecture, the
local machine's architecture is used for inherited images. On the
other hand, the variant is set equal to the parent image's variant,
even when the parent image's variant is unset.
The legacy builder is also updated to allow the user to specify
a '--platform' argument on the command line when creating an image
FROM scratch. A complete platform specification, including variant,
is supported. The built image will include the variant, as will any
derived images.
Signed-off-by: Chris Price <chris.price@docker.com>
