No more concept of "anonymous endpoints". The equivalent is now an
endpoint with no DNSNames set.
Some of the code removed by this commit was mutating user-supplied
endpoint's Aliases to add container's short ID to that list. In order to
preserve backward compatibility for the ContainerInspect endpoint, this
commit also takes care of adding that short ID (and the container
hostname) to `EndpointSettings.Aliases` before returning the response.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The semantics of an "anonymous" endpoint has always been weird: it was
set on endpoints which name shouldn't be taken into account when
inserting DNS records into libnetwork's `Controller.svcRecords` (and
into the NetworkDB). However, in that case the endpoint's aliases would
still be used to create DNS records; thus, making those "anonymous
endpoints" not so anonymous.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The `(*Endpoint).rename()` method is changed to only mutate `ep.name`
and let a new method `(*Endpoint).UpdateDNSNames()` handle DNS updates.
As a consequence, the rollback code that was part of
`(*Endpoint).rename()` is now removed, and DNS updates are now
rolled back by `ContainerRename`.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Instead of special-casing anonymous endpoints in libnetwork, let the
daemon specify what (non fully qualified) DNS names should be associated
to container's endpoints.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Ensure that when removing an image, an image is checked consistently
against the images with the same target digest. Add unit testing around
delete.
Signed-off-by: Derek McGowan <derek@mcg.dev>
They just happen to exist on a network that doesn't support DNS-based
service discovery (ie. no embedded DNS servers are started for them).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Calculate the IPv6 addreesses needed on a bridge, then reconcile them
with the addresses on an existing bridge by deleting then adding as
required.
(Previously, required addresses were added one-by-one, then unwanted
addresses were removed. This meant the daemon failed to start if, for
example, an existing bridge had address '2000:db8::/64' and the config
was changed to '2000:db8::/80'.)
IPv6 addresses are now calculated and applied in one go, so there's no
need for setupVerifyAndReconcile() to check the set of IPv6 addresses on
the bridge. And, it was guarded by !config.InhibitIPv4, which can't have
been right. So, removed its IPv6 parts, and added IPv4 to its name.
Link local addresses, the example given in the original ticket, are now
released when containers are stopped. Not releasing them meant that
when using an LL subnet on the default bridge, no container could be
started after a container was stopped (because the calculated address
could not be re-allocated). In non-default bridge networks using an
LL subnet, addresses leaked.
Linux always uses the standard 'fe80::/64' LL network. So, if a bridge
is configured with an LL subnet prefix that overlaps with it, a config
error is reported. Non-overlapping LL subnet prefixes are allowed.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Before this change `ParentId` was filled for images when calling the
`/images/json` (image list) endpoint but was not for the
`/images/<image>/json` (image inspect).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This repository is not yet a module (i.e., does not have a `go.mod`). This
is not problematic when building the code in GOPATH or "vendor" mode, but
when using the code as a module-dependency (in module-mode), different semantics
are applied since Go1.21, which switches Go _language versions_ on a per-module,
per-package, or even per-file base.
A condensed summary of that logic [is as follows][1]:
- For modules that have a go.mod containing a go version directive; that
version is considered a minimum _required_ version (starting with the
go1.19.13 and go1.20.8 patch releases: before those, it was only a
recommendation).
- For dependencies that don't have a go.mod (not a module), go language
version go1.16 is assumed.
- Likewise, for modules that have a go.mod, but the file does not have a
go version directive, go language version go1.16 is assumed.
- If a go.work file is present, but does not have a go version directive,
language version go1.17 is assumed.
When switching language versions, Go _downgrades_ the language version,
which means that language features (such as generics, and `any`) are not
available, and compilation fails. For example:
# github.com/docker/cli/cli/context/store
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/storeconfig.go:6:24: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/store.go:74:12: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
Note that these fallbacks are per-module, per-package, and can even be
per-file, so _(indirect) dependencies_ can still use modern language
features, as long as their respective go.mod has a version specified.
Unfortunately, these failures do not occur when building locally (using
vendor / GOPATH mode), but will affect consumers of the module.
Obviously, this situation is not ideal, and the ultimate solution is to
move to go modules (add a go.mod), but this comes with a non-insignificant
risk in other areas (due to our complex dependency tree).
We can revert to using go1.16 language features only, but this may be
limiting, and may still be problematic when (e.g.) matching signatures
of dependencies.
There is an escape hatch: adding a `//go:build` directive to files that
make use of go language features. From the [go toolchain docs][2]:
> The go line for each module sets the language version the compiler enforces
> when compiling packages in that module. The language version can be changed
> on a per-file basis by using a build constraint.
>
> For example, a module containing code that uses the Go 1.21 language version
> should have a `go.mod` file with a go line such as `go 1.21` or `go 1.21.3`.
> If a specific source file should be compiled only when using a newer Go
> toolchain, adding `//go:build go1.22` to that source file both ensures that
> only Go 1.22 and newer toolchains will compile the file and also changes
> the language version in that file to Go 1.22.
This patch adds `//go:build` directives to those files using recent additions
to the language. It's currently using go1.19 as version to match the version
in our "vendor.mod", but we can consider being more permissive ("any" requires
go1.18 or up), or more "optimistic" (force go1.21, which is the version we
currently use to build).
For completeness sake, note that any file _without_ a `//go:build` directive
will continue to use go1.16 language version when used as a module.
[1]: 58c28ba286/src/cmd/go/internal/gover/version.go (L9-L56)
[2]: https://go.dev/doc/toolchain
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No need to copy the parent label from the source dangling image, because
it will already be copied from the source image.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
A validation step was added to prevent the daemon from considering "logentries"
as a dynamically loaded plugin, causing it to continue trying to load the plugin;
WARN[2023-12-12T21:53:16.866857127Z] Unable to locate plugin: logentries, retrying in 1s
WARN[2023-12-12T21:53:17.868296836Z] Unable to locate plugin: logentries, retrying in 2s
WARN[2023-12-12T21:53:19.874259254Z] Unable to locate plugin: logentries, retrying in 4s
WARN[2023-12-12T21:53:23.879869881Z] Unable to locate plugin: logentries, retrying in 8s
But would ultimately be returned as an error to the user:
docker container create --name foo --log-driver=logentries nginx:alpine
Error response from daemon: error looking up logging plugin logentries: plugin "logentries" not found
With the additional validation step, an error is returned immediately:
docker container create --log-driver=logentries busybox
Error response from daemon: the logentries logging driver has been deprecated and removed
A migration step was added on container restore. Containers using the
"logentries" logging driver are migrated to use the "local" logging driver:
WARN[2023-12-12T22:38:53.108349297Z] migrated deprecated logentries logging driver container=4c9309fedce75d807340ea1820cc78dc5c774d7bfcae09f3744a91b84ce6e4f7 error="<nil>"
As an alternative to the validation step, I also considered using a "stub"
deprecation driver, however this would not result in an error when creating
the container, and only produce an error when starting:
docker container create --name foo --log-driver=logentries nginx:alpine
4c9309fedce75d807340ea1820cc78dc5c774d7bfcae09f3744a91b84ce6e4f7
docker start foo
Error response from daemon: failed to create task for container: failed to initialize logging driver: the logentries logging driver has been deprecated and removed
Error: failed to start containers: foo
For containers, this validation is added in the backend (daemon). For services,
this was not sufficient, as SwarmKit would try to schedule the task, which
caused a close loop;
docker service create --log-driver=logentries --name foo nginx:alpine
zo0lputagpzaua7cwga4lfmhp
overall progress: 0 out of 1 tasks
1/1: no suitable node (missing plugin on 1 node)
Operation continuing in background.
DEBU[2023-12-12T22:50:28.132732757Z] Calling GET /v1.43/tasks?filters=%7B%22_up-to-date%22%3A%7B%22true%22%3Atrue%7D%2C%22service%22%3A%7B%22zo0lputagpzaua7cwga4lfmhp%22%3Atrue%7D%7D
DEBU[2023-12-12T22:50:28.137961549Z] Calling GET /v1.43/nodes
DEBU[2023-12-12T22:50:28.340665007Z] Calling GET /v1.43/services/zo0lputagpzaua7cwga4lfmhp?insertDefaults=false
DEBU[2023-12-12T22:50:28.343437632Z] Calling GET /v1.43/tasks?filters=%7B%22_up-to-date%22%3A%7B%22true%22%3Atrue%7D%2C%22service%22%3A%7B%22zo0lputagpzaua7cwga4lfmhp%22%3Atrue%7D%7D
DEBU[2023-12-12T22:50:28.345201257Z] Calling GET /v1.43/nodes
So a validation was added in the service create and update endpoints;
docker service create --log-driver=logentries --name foo nginx:alpine
Error response from daemon: the logentries logging driver has been deprecated and removed
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Logentries service will be discontinued next week:
> Dear Logentries user,
>
> We have identified you as the owner of, or collaborator of, a Logentries account.
>
> The Logentries service will be discontinued on November 15th, 2022. This means that your Logentries account access will be removed and all your log data will be permanently deleted on this date.
>
> Next Steps
> If you are interested in an alternative Rapid7 log management solution, InsightOps will be available for purchase through December 16th, 2022. Please note, there is no support to migrate your existing Logentries account to InsightOps.
>
> Thank you for being a valued user of Logentries.
>
> Thank you,
> Rapid7 Customer Success
There is no reason to preserve this code in Moby as a result.
Signed-off-by: Bjorn Neergaard <bneergaard@mirantis.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When reading logs, timestamps should always be presented in UTC. Unlike
the "json-file" and other logging drivers, the "local" logging driver
was using local time.
Thanks to Roman Valov for reporting this issue, and locating the bug.
Before this change:
echo $TZ
Europe/Amsterdam
docker run -d --log-driver=local nginx:alpine
fc166c6b2c35c871a13247dddd95de94f5796459e2130553eee91cac82766af3
docker logs --timestamps fc166c6b2c35c871a13247dddd95de94f5796459e2130553eee91cac82766af3
2023-12-08T18:16:56.291023422+01:00 /docker-entrypoint.sh: /docker-entrypoint.d/ is not empty, will attempt to perform configuration
2023-12-08T18:16:56.291056463+01:00 /docker-entrypoint.sh: Looking for shell scripts in /docker-entrypoint.d/
2023-12-08T18:16:56.291890130+01:00 /docker-entrypoint.sh: Launching /docker-entrypoint.d/10-listen-on-ipv6-by-default.sh
...
With this patch:
echo $TZ
Europe/Amsterdam
docker run -d --log-driver=local nginx:alpine
14e780cce4c827ce7861d7bc3ccf28b21f6e460b9bfde5cd39effaa73a42b4d5
docker logs --timestamps 14e780cce4c827ce7861d7bc3ccf28b21f6e460b9bfde5cd39effaa73a42b4d5
2023-12-08T17:18:46.635967625Z /docker-entrypoint.sh: /docker-entrypoint.d/ is not empty, will attempt to perform configuration
2023-12-08T17:18:46.635989792Z /docker-entrypoint.sh: Looking for shell scripts in /docker-entrypoint.d/
2023-12-08T17:18:46.636897417Z /docker-entrypoint.sh: Launching /docker-entrypoint.d/10-listen-on-ipv6-by-default.sh
...
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If no `dangling` filter is specified, prune should only delete dangling
images.
This wasn't visible by doing `docker image prune` because the CLI
explicitly sets this filter to true.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This struct is intended for internal use only for the backend, and is
not intended to be used externally.
This moves the plugin-related `NetworkListConfig` types to the backend
package to prevent it being imported in the client, and to make it more
clear that this is part of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These structs are intended for internal use only for the backend, and are
not intended to be used externally.
This moves the plugin-related `PluginRmConfig`, `PluginEnableConfig`, and
`PluginDisableConfig` types to the backend package to prevent them being
imported in the client, and to make it more clear that this is part of
internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon currently provides support for API versions all the way back
to v1.12, which is the version of the API that shipped with docker 1.0. On
Windows, the minimum supported version is v1.24.
Such old versions of the client are rare, and supporting older API versions
has accumulated significant amounts of code to remain backward-compatible
(which is largely untested, and a "best-effort" at most).
This patch updates the minimum API version to v1.24, which is the fallback
API version used when API-version negotiation fails. The intent is to start
deprecating older API versions, but no code is removed yet as part of this
patch, and a DOCKER_MIN_API_VERSION environment variable is added, which
allows overriding the minimum version (to allow restoring the behavior from
before this patch).
With this patch the daemon defaults to API v1.24 as minimum:
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.24)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
Trying to use an older version of the API produces an error:
DOCKER_API_VERSION=1.23 docker version
Client:
Version: 24.0.2
API version: 1.23 (downgraded from 1.43)
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Error response from daemon: client version 1.23 is too old. Minimum supported API version is 1.24, please upgrade your client to a newer version
To restore the previous minimum, users can start the daemon with the
DOCKER_MIN_API_VERSION environment variable set:
DOCKER_MIN_API_VERSION=1.12 dockerd
API 1.12 is the oldest supported API version on Linux;
docker version
Client:
Version: 24.0.2
API version: 1.43
Go version: go1.20.4
Git commit: cb74dfc
Built: Thu May 25 21:50:49 2023
OS/Arch: linux/arm64
Context: default
Server:
Engine:
Version: dev
API version: 1.44 (minimum version 1.12)
Go version: go1.21.3
Git commit: 0322a29b9ef8806aaa4b45dc9d9a2ebcf0244bf4
Built: Mon Dec 4 15:22:17 2023
OS/Arch: linux/arm64
Experimental: false
containerd:
Version: v1.7.9
GitCommit: 4f03e100cb967922bec7459a78d16ccbac9bb81d
runc:
Version: 1.1.10
GitCommit: v1.1.10-0-g18a0cb0
docker-init:
Version: 0.19.0
GitCommit: de40ad0
When using the `DOCKER_MIN_API_VERSION` with a version of the API that
is not supported, an error is produced when starting the daemon;
DOCKER_MIN_API_VERSION=1.11 dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: 1.11
DOCKER_MIN_API_VERSION=1.45 dockerd --validate
invalid DOCKER_MIN_API_VERSION: maximum supported API version is 1.44: 1.45
Specifying a malformed API version also produces the same error;
DOCKER_MIN_API_VERSION=hello dockerd --validate
invalid DOCKER_MIN_API_VERSION: minimum supported API version is 1.12: hello
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `ContainerCreateConfig` and `ContainerRmConfig` structs are used for
options to be passed to the backend, and are not used in client code.
Thess struct currently is intended for internal use only (for example, the
`AdjustCPUShares` is an internal implementation details to adjust the container's
config when older API versions are used).
Somewhat ironically, the signature of the Backend has a nicer UX than that
of the client's `ContainerCreate` signature (which expects all options to
be passed as separate arguments), so we may want to update that signature
to be closer to what the backend is using, but that can be left as a future
exercise.
This patch moves the `ContainerCreateConfig` and `ContainerRmConfig` structs
to the backend package to prevent it being imported in the client, and to make
it more clear that this is part of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move the initialization logic to the attachContext itself, so that
the container doesn't have to be aware about mutexes and other logic.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I noticed this log being logged as an error, but the kill logic actually
proceeds after this (doing a "direct" kill instead). While usually containers
are expected to be exiting within the given timeout, I don't think this
needs to be logged as an error (an error is returned after we fail to
kill the container).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When live-restore is enabled, containers with autoremove enabled
shouldn't be forcibly killed when engine restarts.
They still should be removed if they exited while the engine was down
though.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
BaseFS is not serialized and is lost after an unclean shutdown. Unmount
method in the containerd image service implementation will not work
correctly in that case.
This patch will allow Unmount to restore the BaseFS if the target is
still mounted.
The reason it works with graphdrivers is that it doesn't directly
operate on BaseFS. It uses RWLayer, which is explicitly restored
immediately as soon as container is loaded.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Also, err `e` is renamed into the more standard `err` as the defer
already uses `retErr` to avoid clashes (changed in f5a611a74).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
DNS config is a property of each adapter on Windows, thus we've a
dedicated `EndpointOption` for that.
The list of `EndpointOption` that should be applied to a given endpoint
is built by `buildCreateEndpointOptions`. This function contains a
seemingly flawed condition that adds the DNS config _iff_:
1. the network isn't internal ;
2. no ports are published / exposed through another sandbox endpoint ;
While 1. does make sense, there's actually no justification for 2.,
hence this commit remove this part of the condition.
This logic flaw has been made obvious by 0fd0e82, but it was originally
introduced by d1e0a78. Commit and PR comments don't mention why this is
done like so. Most probably, this was overlooked both by the original
author and the PR reviewers.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The `buildCreateEndpointOptions` does a lot of things to build the list
of `libnetwork.EndpointOption` from the `EndpointSettings` spec. To skip
ports-related options, an early return was put in the middle of that
function body.
Early returns are generally great, but put in the middle of a 150-loc
long function that does a lot, they're just a potential footgun. And I'm
the one who pulled the trigger in 052562f. Since this commit, generic
options won't be applied to endpoints if there's already one with
exposed/published ports. As a consequence, only the first endpoint can
have a user-defined MAC address right now.
Instead of moving up the code line that adds generic options, a better
change IMO is to move ports-related options, and the early-return gating
those options, to a dedicated func to make `buildCreateEndpointOptions`
slightly easier to read and reason about.
There was actually one oddity in the original
`buildCreateEndpointOptions`: the early-return also gates the addition
of `CreateOptionDNS`. These options are Windows-specific; a comment is
added to explain that. But the oddity is really: why are we checking if
an endpoint with exposed / published ports joined this sandbox to decide
whether we want to configure DNS server on the endpoint's adapter? Well,
this early-return was most probably overlooked by the original author
and by reviewers at the time these options were added (in commit d1e0a78)
Let's fix that in a follow-up commit.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The DirCopy() function in "graphdriver/copy/copy.go" has a special case for
skip file-attribute copying when making a hard link to an already-copied
file, if "copyMode == Hardlink". Do the same for copies of hard-links in
the source filesystem.
Significantly speeds up vfs's copy of a BusyBox filesystem (which
consists mainly of hard links to a single binary), making moby's
integration tests run more quickly and more reliably in a dev container.
Fixes#46810
Signed-off-by: Rob Murray <rob.murray@docker.com>
