These types and functions are more closely related to the functionality
provided by pkg/systeminfo, and used in conjunction with the other functions
in that package, so moving them there.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This one is a "bit" fuzzy, as it may not be _directly_ related to `archive`,
but it's always used _in combination_ with the archive package, so moving it
there.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch:
- Deprecates pkg/system.DefaultPathEnv
- Moves the implementation inside oci
- Adds TODOs to align the default in the Builder with the one used elsewhere
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the file doesn't exist, the process isn't running, so we should be able
to ignore that.
Also remove an intermediate variable.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The same attribute was generated for each path that was created, but always
the same, so instead of generating it in each iteration, generate it once,
and pass it to our mkdirall() implementation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The regex only matched volume paths without a trailing path-separator. In cases
where a path would be passed with a trailing path-separator, it would depend on
further code in mkdirall to strip the trailing slash, then to perform the regex
again in the next iteration.
While regexes aren't ideal, we're already executing this one, so we may as well
use it to match those situations as well (instead of executing it twice), to
allow us to return early.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Ideally, we would construct this lazily, but adding a function and a
sync.Once felt like a bit "too much".
Also updated the GoDoc for some functions to better describe what they do.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tests were effectively doing "subtests", using comments to describe each,
however;
- due to the use of `t.Fatal()` would terminate before completing all "subtests"
- The error returned by the function being tested (`Chtimes`), was not checked,
and the test used "indirect" checks to verify if it worked correctly. Adding
assertions to check if the function didn't produce an error.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removing the "Linux" suffix from one test, which should probably be
rewritten to be run on "unix", to provide test-coverage for those
implementations.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With t.TempDir(), some of the test-utilities became so small that
it was more transparent to inline them. This also helps separating
concenrs, as we're in the process of thinning out and decoupling
some packages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It looks like this function was converting the time (`windows.NsecToTimespec()`),
only to convert it back (`windows.TimespecToNsec()`). This became clear when
moving the lines together:
```go
ctimespec := windows.NsecToTimespec(ctime.UnixNano())
c := windows.NsecToFiletime(windows.TimespecToNsec(ctimespec))
```
And looking at the Golang code, it looks like they're indeed the exact reverse:
```go
func TimespecToNsec(ts Timespec) int64 { return int64(ts.Sec)*1e9 + int64(ts.Nsec) }
func NsecToTimespec(nsec int64) (ts Timespec) {
ts.Sec = nsec / 1e9
ts.Nsec = nsec % 1e9
return
}
```
While modifying this code, also renaming the `e` variable to a more common `err`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This more closely matches to how it's used everywhere. Also move the comment
describing "what" ChTimes() does inside its GoDoc.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code caused me some head-scratches, and initially I wondered
if this was a bug, but it looks to be intentional to set nsec, not
sec, as time.Unix() internally divides nsec, and sets sec accordingly;
https://github.com/golang/go/blob/go1.19.2/src/time/time.go#L1364-L1380
// Unix returns the local Time corresponding to the given Unix time,
// sec seconds and nsec nanoseconds since January 1, 1970 UTC.
// It is valid to pass nsec outside the range [0, 999999999].
// Not all sec values have a corresponding time value. One such
// value is 1<<63-1 (the largest int64 value).
func Unix(sec int64, nsec int64) Time {
if nsec < 0 || nsec >= 1e9 {
n := nsec / 1e9
sec += n
nsec -= n * 1e9
if nsec < 0 {
nsec += 1e9
sec--
}
}
return unixTime(sec, int32(nsec))
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code was moved to a separate file in fe5b34ba88,
but it's unclear why it was moved (as this file is not excluded on Windows).
Moving the code back into the chtimes file, to move it closer to where it's used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was only used in a couple of places, and in most places shouldn't be used
as those locations were in unix/linux-only files, so didn't need the wrapper.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility was only used in a single place, and had no external consumers.
Move it to where it's used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
pkg/directory/directory.go:9:49: empty-lines: extra empty line at the start of a block (revive)
pkg/pubsub/publisher.go:8:48: empty-lines: extra empty line at the start of a block (revive)
pkg/loopback/attach_loopback.go:96:69: empty-lines: extra empty line at the start of a block (revive)
pkg/devicemapper/devmapper_wrapper.go:136:48: empty-lines: extra empty line at the start of a block (revive)
pkg/devicemapper/devmapper.go:391:35: empty-lines: extra empty line at the end of a block (revive)
pkg/devicemapper/devmapper.go:676:35: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/changes_posix_test.go:15:38: empty-lines: extra empty line at the end of a block (revive)
pkg/devicemapper/devmapper.go:241:51: empty-lines: extra empty line at the start of a block (revive)
pkg/fileutils/fileutils_test.go:17:47: empty-lines: extra empty line at the end of a block (revive)
pkg/fileutils/fileutils_test.go:34:48: empty-lines: extra empty line at the end of a block (revive)
pkg/fileutils/fileutils_test.go:318:32: empty-lines: extra empty line at the end of a block (revive)
pkg/tailfile/tailfile.go:171:6: empty-lines: extra empty line at the end of a block (revive)
pkg/tarsum/fileinfosums_test.go:16:41: empty-lines: extra empty line at the end of a block (revive)
pkg/tarsum/tarsum_test.go:198:42: empty-lines: extra empty line at the start of a block (revive)
pkg/tarsum/tarsum_test.go:294:25: empty-lines: extra empty line at the start of a block (revive)
pkg/tarsum/tarsum_test.go:407:34: empty-lines: extra empty line at the end of a block (revive)
pkg/ioutils/fswriters_test.go:52:45: empty-lines: extra empty line at the end of a block (revive)
pkg/ioutils/writers_test.go:24:39: empty-lines: extra empty line at the end of a block (revive)
pkg/ioutils/bytespipe_test.go:78:26: empty-lines: extra empty line at the end of a block (revive)
pkg/sysinfo/sysinfo_linux_test.go:13:37: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/archive_linux_test.go:57:64: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/changes.go:248:72: empty-lines: extra empty line at the start of a block (revive)
pkg/archive/changes_posix_test.go:15:38: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/copy.go:248:124: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/diff_test.go:198:44: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/archive.go:304:12: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/archive.go:749:37: empty-lines: extra empty line at the end of a block (revive)
pkg/archive/archive.go:812:81: empty-lines: extra empty line at the start of a block (revive)
pkg/archive/copy_unix_test.go:347:34: empty-lines: extra empty line at the end of a block (revive)
pkg/system/path.go:11:39: empty-lines: extra empty line at the end of a block (revive)
pkg/system/meminfo_linux.go:29:21: empty-lines: extra empty line at the end of a block (revive)
pkg/plugins/plugins.go:135:32: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/response.go:71:48: empty-lines: extra empty line at the start of a block (revive)
pkg/authorization/api_test.go:18:51: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/middleware_test.go:23:44: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/middleware_unix_test.go:17:46: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/api_test.go:57:45: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/response.go:83:50: empty-lines: extra empty line at the start of a block (revive)
pkg/authorization/api_test.go:66:47: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/middleware_unix_test.go:45:48: empty-lines: extra empty line at the end of a block (revive)
pkg/authorization/response.go:145:75: empty-lines: extra empty line at the start of a block (revive)
pkg/authorization/middleware_unix_test.go:56:51: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These functions were moved to github.com/moby/sys/sequential, and the
stubs were added in 509f19f611, which is
part of the 22.x release, so we can safely remove these from master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Migrating these functions to allow them being shared between moby, docker/cli,
and containerd, and to allow using them without importing all of sys / system,
which (in containerd) also depends on hcsshim and more.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
filepath.IsAbs() will short-circuit on Linux/Unix, so having a single
implementation should not affect those platforms.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was only used in a single place, and pkg/parsers/operatingsystem
already copied the `verNTWorkstation` const, so we might as well move this function
there as well to "unclutter" pkg/system.
The function had no external users, so not adding an alias / stub.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These consts were deprecated in 46c591b045, and
although that has not been in a release yet (we usually deprecate for at least
one release before removing), doing a search showed that there were no external
consumers of these consts, so it should be fine to remove them.
This patch removes the consts that were moded to pkg/idtools;
- SeTakeOwnershipPrivilege
- ContainerAdministratorSidString
- ContainerUserSidString
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is not "very" important, but this dependency was only used
for a single const, which could be satisfied with a comment.
Not very urgent, as github.com/docker/go-units is likely imported
through other ways already (but it's nice to have the package be
more isolated).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
pkg/system historically has been a bit of a kitchen-sink of things that were
somewhat "system" related, but didn't have a good place for. EnsureRemoveAll()
is one of those utilities. EnsureRemoveAll() is used to both unmount and remove
a path, for which it depends on both github.com/moby/sys/mount, which in turn
depends on github.com/moby/sys/mountinfo.
pkg/system is imported in the CLI, but neither EnsureRemoveAll(), nor any of its
moby/sys dependencies are used on the client side, so let's move this function
somewhere else, to remove those dependencies from the CLI.
I looked for plausible locations that were related; it's used in:
- daemon
- daemon/graphdriver/XXX/
- plugin
I considered moving it into a (e.g.) "utils" package within graphdriver (but not
a huge fan of "utils" packages), and given that it felt (mostly) related to
cleaning up container filesystems, I decided to move it there.
Some things to follow-up on after this:
- Verify if this function is still needed (it feels a bit like a big hammer in
a "YOLO, let's try some things just in case it fails")
- Perhaps it should be integrated in `containerfs.Remove()` (so that it's used
automatically)
- Look if there's other implementations (and if they should be consolidated),
although (e.g.) the one in containerd is a copy of ours:
https://github.com/containerd/containerd/blob/v1.5.9/pkg/cri/server/helpers_linux.go#L200
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was added in 194eaa5c0f to check image
compatibility based on Platform.Features;
// For now, hard code that all base images except nanoserver depend on win32k support
if imageData.Name != "nanoserver" {
imageData.OSFeatures = append(imageData.OSFeatures, "win32k")
}
But no longer used since 1f59bc8c03 and
d231260868
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the syscall method instead of repeating the type conversions for
the syscall.Stat_t Atim/Mtim members. This also allows to drop the
//nolint: unconvert comments.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Because FreeBSD uses 64-bit device nodes (see
https://reviews.freebsd.org/rS318736), Linux implementation of
`system.Mknod` & `system.Mkdev` is not sufficient.
This change adds freebsd-specific implementations for `Mknod` and
Mkdev`.
Signed-off-by: Artem Khramov <akhramov@pm.me>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
These consts were used in combination with idtools utilities, which
makes it a more logical location for these consts to live.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On Linux/Unix it was just a thin wrapper for unix.Unmount(), and a no-op on Windows.
This function was not used anywhere (also not externally), so removing this without
deprecating first.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the deprecated wrappers, so that the package no longer has
hcsshim as a dependency. These wrappers were no longer used in our code,
and were deprecated in the 20.10 release (giving external consumers to
replace the deprecated ones).
Note that there are two consts which were unused, but for which there is
no replacement in golang.org/x/sys;
const (
PROCESS_TRUST_LABEL_SECURITY_INFORMATION = 0x00000080
ACCESS_FILTER_SECURITY_INFORMATION = 0x00000100
)
PROCESS_TRUST_LABEL_SECURITY_INFORMATION is documented as "reserved", and I could
not find clear documentation about ACCESS_FILTER_SECURITY_INFORMATION, so not sure
if they must be included in golang.org/x/sys: https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/23e75ca3-98fd-4396-84e5-86cd9d40d343
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
