Previous commit made getDBhandle a one-liner returning a struct
member -- making it useless. Inline it.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This parameter was used to tell the boltdb kvstore not to open/close
the underlying boltdb db file before/after each get/put operation.
Since d21d0884ae, we've a single datastore instance shared by all
components that need it. That commit set `PersistConnection=true`.
We can now safely remove this param altogether, and remove all the
code that was opening and closing the db file before and after each
operation -- it's dead code!
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
File paths can contain commas, particularly paths returned from
t.TempDir() in subtests which include commas in their names. There is
only one datastore provider and it only supports a single address, so
the only use of parsing the address is to break tests in mysterious
ways.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Calculate the IPv6 addreesses needed on a bridge, then reconcile them
with the addresses on an existing bridge by deleting then adding as
required.
(Previously, required addresses were added one-by-one, then unwanted
addresses were removed. This meant the daemon failed to start if, for
example, an existing bridge had address '2000:db8::/64' and the config
was changed to '2000:db8::/80'.)
IPv6 addresses are now calculated and applied in one go, so there's no
need for setupVerifyAndReconcile() to check the set of IPv6 addresses on
the bridge. And, it was guarded by !config.InhibitIPv4, which can't have
been right. So, removed its IPv6 parts, and added IPv4 to its name.
Link local addresses, the example given in the original ticket, are now
released when containers are stopped. Not releasing them meant that
when using an LL subnet on the default bridge, no container could be
started after a container was stopped (because the calculated address
could not be re-allocated). In non-default bridge networks using an
LL subnet, addresses leaked.
Linux always uses the standard 'fe80::/64' LL network. So, if a bridge
is configured with an LL subnet prefix that overlaps with it, a config
error is reported. Non-overlapping LL subnet prefixes are allowed.
Signed-off-by: Rob Murray <rob.murray@docker.com>
This repository is not yet a module (i.e., does not have a `go.mod`). This
is not problematic when building the code in GOPATH or "vendor" mode, but
when using the code as a module-dependency (in module-mode), different semantics
are applied since Go1.21, which switches Go _language versions_ on a per-module,
per-package, or even per-file base.
A condensed summary of that logic [is as follows][1]:
- For modules that have a go.mod containing a go version directive; that
version is considered a minimum _required_ version (starting with the
go1.19.13 and go1.20.8 patch releases: before those, it was only a
recommendation).
- For dependencies that don't have a go.mod (not a module), go language
version go1.16 is assumed.
- Likewise, for modules that have a go.mod, but the file does not have a
go version directive, go language version go1.16 is assumed.
- If a go.work file is present, but does not have a go version directive,
language version go1.17 is assumed.
When switching language versions, Go _downgrades_ the language version,
which means that language features (such as generics, and `any`) are not
available, and compilation fails. For example:
# github.com/docker/cli/cli/context/store
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/storeconfig.go:6:24: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
/go/pkg/mod/github.com/docker/cli@v25.0.0-beta.2+incompatible/cli/context/store/store.go:74:12: predeclared any requires go1.18 or later (-lang was set to go1.16; check go.mod)
Note that these fallbacks are per-module, per-package, and can even be
per-file, so _(indirect) dependencies_ can still use modern language
features, as long as their respective go.mod has a version specified.
Unfortunately, these failures do not occur when building locally (using
vendor / GOPATH mode), but will affect consumers of the module.
Obviously, this situation is not ideal, and the ultimate solution is to
move to go modules (add a go.mod), but this comes with a non-insignificant
risk in other areas (due to our complex dependency tree).
We can revert to using go1.16 language features only, but this may be
limiting, and may still be problematic when (e.g.) matching signatures
of dependencies.
There is an escape hatch: adding a `//go:build` directive to files that
make use of go language features. From the [go toolchain docs][2]:
> The go line for each module sets the language version the compiler enforces
> when compiling packages in that module. The language version can be changed
> on a per-file basis by using a build constraint.
>
> For example, a module containing code that uses the Go 1.21 language version
> should have a `go.mod` file with a go line such as `go 1.21` or `go 1.21.3`.
> If a specific source file should be compiled only when using a newer Go
> toolchain, adding `//go:build go1.22` to that source file both ensures that
> only Go 1.22 and newer toolchains will compile the file and also changes
> the language version in that file to Go 1.22.
This patch adds `//go:build` directives to those files using recent additions
to the language. It's currently using go1.19 as version to match the version
in our "vendor.mod", but we can consider being more permissive ("any" requires
go1.18 or up), or more "optimistic" (force go1.21, which is the version we
currently use to build).
For completeness sake, note that any file _without_ a `//go:build` directive
will continue to use go1.16 language version when used as a module.
[1]: 58c28ba286/src/cmd/go/internal/gover/version.go (L9-L56)
[2]: https://go.dev/doc/toolchain
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the code slightly more idiomatic; remove some "var" declarations,
remove some intermediate variables and redundant error-checks, and remove
the filePerm const.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This boolean was not used anywhere, so we can remove it. Also cleaning up
the implementation a bit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The WriteOptions struct was only used to set the "IsDir" option. This option
was added in d635a8e32b
and was only supported by the etcd libkv store.
The BoltDB store does not support this option, making the WriteOptions
struct fully redundant.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The only remaining kvstore is BoltDB, which doesn't use TLS connections
or authentication, so we can remove these options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A reduced set of the dependency, only taking the parts that are used. Taken from
upstream commit: dfacc563de
# install filter-repo (https://github.com/newren/git-filter-repo/blob/main/INSTALL.md)
brew install git-filter-repo
cd ~/projects
# create a temporary clone of docker
git clone https://github.com/docker/libkv.git temp_libkv
cd temp_libkv
# create branch to work with
git checkout -b migrate_libkv
# remove all code, except for the files we need; rename the remaining ones to their new target location
git filter-repo --force \
--path libkv.go \
--path store/store.go \
--path store/boltdb/boltdb.go \
--path-rename libkv.go:libnetwork/internal/kvstore/kvstore_manage.go \
--path-rename store/store.go:libnetwork/internal/kvstore/kvstore.go \
--path-rename store/boltdb/:libnetwork/internal/kvstore/boltdb/
# go to the target github.com/moby/moby repository
cd ~/projects/docker
# create a branch to work with
git checkout -b integrate_libkv
# add the temporary repository as an upstream and make sure it's up-to-date
git remote add temp_libkv ~/projects/temp_libkv
git fetch temp_libkv
# merge the upstream code, rewriting "pkg/symlink" to "symlink"
git merge --allow-unrelated-histories --signoff -S temp_libkv/migrate_libkv
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Allow SetMatrix to be used as a value type with a ready-to-use zero
value. SetMatrix values are already non-copyable by virtue of having a
mutex field so there is no harm in allowing non-pointer values to be
used as local variables or struct fields. Any attempts to pass around
by-value copies, e.g. as function arguments, will be flagged by go vet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Perhaps the testutils package in the past had an `init()` function to set up
specific things, but it no longer has. so these imports were doing nothing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Internal directory is designed to contain libraries
that are exclusively used by this project
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
While doing a boltdb operation and if the bucket is not found
we should not return a boltdb specific bucket not found error
because this causes leaky abstraction where in the user of libkv
needs to know about boltdb and import boltdb dependencies
neither of which is desirable. Replaced all the bucket not found
errors with the more generic `store.ErrKeyNotFound` error which
is more appropriate.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
When using AtomicPut with 'previous' set at nil, it interprets
that the Key should be created with the AtomicPut. Instead of
returning a generic error, we return store.ErrKeyExists if the
key exists in the store during the operation.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
Currently boltdb uses a handle which can be accessed
concurrently from multiple go routines and all of them
trying to open and close the boldb db handle which can
cause havoc. Use a mutex to serialize db access and
handle access.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
This commit migrates the old 'go-etcd' client, which is deprecated
to the new 'coreos/etcd/client'.
One notable change is the ability to specify an 'IsDir' parameter
to the 'Put' call. This allows to circumvent the limitations of etcd
regarding the key/directory distinction while setting up Watches on
a directory. A conservative measure to set up a watch that should be
used the same way for etcd/consul/zookeeper is to enforce the 'IsDir'
parameter with 'WriteOptions' on 'Put' to avoid the 'NotANode' error
thrown by etcd on Watch call. Consul and zookeeper are not using the
'IsDir' parameter.
Signed-off-by: Alexandre Beslic <abronan@docker.com>
