Both of these were deprecated in 55f675811a,
but the format of the GoDoc comments didn't follow the correct format, which
caused them not being picked up by tools as "deprecated".
This patch updates uses in the codebase to use the alternatives.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the file doesn't exist, the process isn't running, so we should be able
to ignore that.
Also remove an intermediate variable.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`system.MkdirAll()` is a special version of os.Mkdir to handle creating directories
using Windows volume paths (`"\\?\Volume{4c1b02c1-d990-11dc-99ae-806e6f6e6963}"`).
This may be important when `MkdirAll` is used, which traverses all parent paths to
create them if missing (ultimately landing on the "volume" path).
The daemon.NewDaemon() function used `system.MkdirAll()` in various places where
a subdirectory within `daemon.Root` was created. This appeared to be mostly out
of convenience (to not have to handle `os.ErrExist` errors). The `daemon.Root`
directory should already be set up in these locations, and should be set up with
correct permissions. Using `system.MkdirAll()` would potentially mask errors if
the root directory is missing, and instead set up parent directories (possibly
with incorrect permissions).
Because of the above, this patch changes `system.MkdirAll` to `os.Mkdir`. As we
are changing these lines, this patch also changes the legacy octal notation
(`0700`) to the now preferred `0o700`.
One location continues to use `system.MkdirAll`, as the temp-directory may be
configured to be outside of `daemon.Root`, but a redundant `os.Stat(realTmp)`
was removed, as `system.MkdirAll` is expected to handle this.
As we are changing these lines, this patch also changes the legacy octal notation
(`0700`) to the now preferred `0o700`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes it more transparent that it's unused for Linux,
and we don't pass "root", which has no relation with the
path on Linux.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows us to run CI with the containerd snapshotter enabled, without
patching the daemon.json, or changing how tests set up daemon flags.
A warning log is added during startup, to inform if this variable is set,
as it should only be used for our integration tests.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The implementation of CanAccess() is very rudimentary, and should
not be used for anything other than a basic check (and maybe not
even for that). It's only used in a single location in the daemon,
so move it there, and un-export it to not encourage others to use
it out of context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Building off insights from the great work Cory Snider has been doing,
this replaces a reexec with a much lower overhead implementation which
performs the `Chddir` in a new goroutine that is locked to a specific
thread with CLONE_FS unshared.
The thread is thrown away afterwards and the Chdir does effectively the
same thing as what the reexec was being used for.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
go-winio now defines this function, so we can consume that.
Note that there's a difference between the old implementation and the original
one (added in 1cb9e9b44e). The old implementation
had special handling for win32 error codes, which was removed in the go-winio
implementation in 0966e1ad56
As `go-winio.GetFileSystemType()` calls `filepath.VolumeName(path)` internally,
this patch also removes the `string(home[0])`, which is redundant, and could
potentially panic if an empty string would be passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 955c1f881a (Docker v17.12.0) replaced
detection of support for multiple lowerdirs (as required by overlay2) to not
depend on the kernel version. The `overlay2.override_kernel_check` was still
used to print a warning that older kernel versions may not have full support.
After this, commit e226aea280 (Docker v20.10.0,
backported to v19.03.7) removed uses of the `overlay2.override_kernel_check`
option altogether, but we were still parsing it.
This patch changes the `parseOptions()` function to not parse the option,
printing a deprecation warning instead. We should change this to be an error,
but the `overlay2.override_kernel_check` option was not deprecated in the
documentation, so keeping it around for one more release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On Linux, when (os/exec.Cmd).SysProcAttr.Pdeathsig is set, the signal
will be sent to the process when the OS thread on which cmd.Start() was
executed dies. The runtime terminates an OS thread when a goroutine
exits after being wired to the thread with runtime.LockOSThread(). If
other goroutines are allowed to be scheduled onto a thread which called
cmd.Start(), an unrelated goroutine could cause the thread to be
terminated and prematurely signal the command. See
https://github.com/golang/go/issues/27505 for more information.
Prevent started subprocesses with Pdeathsig from getting signaled
prematurely by wiring the starting goroutine to the OS thread until the
subprocess has exited. No other goroutines can be scheduled onto a
locked thread so it will remain alive until unlocked or the daemon
process exits.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The pkg/fsutils package was forked in containerd, and later moved to
containerd/continuity/fs. As we're moving more bits to containerd, let's also
use the same implementation to reduce code-duplication and to prevent them from
diverging.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, the awslogs collectBatch and processEvent
function documentation still referenced the batchPublishFrequency
constant which was removed in favor of the configurable log stream
forceFlushInterval member.
Signed-off-by: Austin Vazquez <macedonv@amazon.com>
Before this change restarting the daemon in live-restore with running
containers + a restart policy meant that volume refs were not restored.
This specifically happens when the container is still running *and*
there is a restart policy that would make sure the container was running
again on restart.
The bug allows volumes to be removed even though containers are
referencing them. 😱
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This package was moved to a separate repository, using the steps below:
# install filter-repo (https://github.com/newren/git-filter-repo/blob/main/INSTALL.md)
brew install git-filter-repo
cd ~/projects
# create a temporary clone of docker
git clone https://github.com/docker/docker.git moby_pubsub_temp
cd moby_pubsub_temp
# for reference
git rev-parse HEAD
# --> 572ca799db
# remove all code, except for pkg/pubsub, license, and notice, and rename pkg/pubsub to /
git filter-repo --path pkg/pubsub/ --path LICENSE --path NOTICE --path-rename pkg/pubsub/:
# remove canonical imports
git revert -s -S 585ff0ebbe6bc25b801a0e0087dd5353099cb72e
# initialize module
go mod init github.com/moby/pubsub
go mod tidy
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Managed containerd processes are executed with SysProcAttr.Pdeathsig set
to syscall.SIGKILL so that the managed containerd is automatically
killed along with the daemon. At least, that is the intention. In
practice, the signal is sent to the process when the creating _OS
thread_ dies! If a goroutine exits while locked to an OS thread, the Go
runtime will terminate the thread. If that thread happens to be the
same thread which the subprocess was started from, the subprocess will
be signaled. Prevent the journald driver from sometimes unintentionally
killing child processes by ensuring that all runtime.LockOSThread()
calls are paired with runtime.UnlockOSThread().
Signed-off-by: Cory Snider <csnider@mirantis.com>
daemon/network/filter_test.go:174:19: empty-lines: extra empty line at the end of a block (revive)
daemon/restart.go:17:116: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_linux_test.go:255:41: empty-lines: extra empty line at the end of a block (revive)
daemon/reload_test.go:340:58: empty-lines: extra empty line at the end of a block (revive)
daemon/oci_linux.go:495:101: empty-lines: extra empty line at the end of a block (revive)
daemon/seccomp_linux_test.go:17:36: empty-lines: extra empty line at the start of a block (revive)
daemon/container_operations.go:560:73: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_unix.go:558:76: empty-lines: extra empty line at the end of a block (revive)
daemon/daemon_unix.go:1092:64: empty-lines: extra empty line at the start of a block (revive)
daemon/container_operations.go:587:24: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:807:18: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:813:42: empty-lines: extra empty line at the end of a block (revive)
daemon/network.go:872:72: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
daemon/images/image_squash.go:17:71: empty-lines: extra empty line at the start of a block (revive)
daemon/images/store.go:128:27: empty-lines: extra empty line at the end of a block (revive)
daemon/images/image_list.go:154:55: empty-lines: extra empty line at the start of a block (revive)
daemon/images/image_delete.go:135:13: empty-lines: extra empty line at the end of a block (revive)
daemon/images/image_search.go:25:64: empty-lines: extra empty line at the start of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
