This fix tries to address the issue raised in 36142 where
there are discrepancies between Swarm API and swagger.yaml.
This fix adds two recently added state `REMOVE` and `ORPHANED` to TaskState.
This fix fixes 36142.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Actually the specification was expecting a 'additionalProperties' for the Volumes data, where in fact it's expecting
a map of string pointing to empty object.
Signed-off-by: Joel Wurtz <joel.wurtz@gmail.com>
This route expects `application/json`. Sending a content type header of `application/octet-stream` results in an error.
Signed-off-by: Asad Saeeduddin <masaeedu@gmail.com>
The Swagger file contained a version matrix to
find which API version is used by which version
of Docker.
Given that Docker is a downstream of the Moby project,
we should not be maintaining such a matrix in this
repository.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently, if a container removal has failed for some reason,
any client waiting for removal (e.g. `docker run --rm`) is
stuck, waiting for removal to succeed while it has failed already.
For more details and the reproducer, please check
https://github.com/moby/moby/issues/34945
This commit addresses that by allowing `ContainerWait()` with
`container.WaitCondition == "removed"` argument to return an
error in case of removal failure. The `ContainerWaitOKBody`
stucture returned to a client is amended with a pointer to `struct Error`,
containing an error message string, and the `Client.ContainerWait()`
is modified to return the error, if any, to the client.
Note that this feature is only available for API version >= 1.34.
In order for the old clients to be unstuck, we just close the connection
without writing anything -- this causes client's error.
Now, docker-cli would need a separate commit to bump the API to 1.34
and to show an error returned, if any.
[v2: recreate the waitRemove channel after closing]
[v3: document; keep legacy behavior for older clients]
[v4: convert Error from string to pointer to a struct]
[v5: don't emulate old behavior, send empty response in error case]
[v6: rename legacy* vars to include version suffix]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Describe more how host port allocation is done when
container is stopped/started in "PublishAllPorts".
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Commit e98e4a7111 implemented API version
negotiation using the `/_ping` endpoint. In that change, URL validation for the
maximum supported API version was removed from the API server (validation for
the _minimum_ version was kept in place).
With this feature, clients that support version negotiation would negotiate the
maximum version supported by the daemon, and downgrade to an older API version
if the client's default API version is not supported.
However, clients that do _not_ support version negotiation can call API versions
that are higher than the maximum supported version. Due to the missing version
check, this is silently ignored, and the daemon's default API version is used.
This is a problem, because the actual API version in use is non-deterministic;
for example, calling `/v9999.9999/version` on a daemon that runs API v1.34 will
use API v1.34, but calling the same URL on an older daemon may use API version
v1.24.
This patch reverts the removal of the API check for maximum supported versions.
The documentation has been updated accordingly
Before this patch is applied, the daemon returns a 200 (success):
$ curl -v --unix-socket /var/run/docker.sock http://localhost/v9999.9999/version
* Trying /var/run/docker.sock...
* Connected to localhost (/Users/sebastiaan/Library/Containers/com.dock) port 80 (#0)
> GET /v9999.9999/version HTTP/1.1
> Host: localhost
> User-Agent: curl/7.54.0
> Accept: */*
>
< HTTP/1.1 200 OK
< Api-Version: 1.32
< Content-Length: 240
< Content-Type: application/json
< Date: Tue, 10 Oct 2017 09:11:29 GMT
< Docker-Experimental: true
< Ostype: linux
< Server: Docker/17.09.0-ce (linux)
<
{"Version":"17.09.0-ce","ApiVersion":"1.32","MinAPIVersion":"1.12","GitCommit":"afdb6d4","GoVersion":"go1.8.3","Os":"linux","Arch":"amd64","KernelVersion":"4.9.49-moby","Experimental":true,"BuildTime":"2017-09-26T22:45:38.000000000+00:00"}
* Connection #0 to host localhost left intact
After this patch is applied, a 400 (Bad Request) is returned:
$ curl -v --unix-socket /var/run/docker.sock http://localhost/v9999.9999/version
* Trying /var/run/docker.sock...
* Connected to localhost (/var/run/docker.sock) port 80 (#0)
> GET /v9999.9999/info HTTP/1.1
> Host: localhost
> User-Agent: curl/7.52.1
> Accept: */*
>
< HTTP/1.1 400 Bad Request
< Content-Type: application/json
< Date: Tue, 10 Oct 2017 08:08:34 GMT
< Content-Length: 89
<
{"message":"client version 9999.9999 is too new. Maximim supported API version is 1.34"}
* Curl_http_done: called premature == 0
* Connection #0 to host localhost left intact
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: John Howard <jhoward@microsoft.com>
This PR has the API changes described in https://github.com/moby/moby/issues/34617.
Specifically, it adds an HTTP header "X-Requested-Platform" which is a JSON-encoded
OCI Image-spec `Platform` structure.
In addition, it renames (almost all) uses of a string variable platform (and associated)
methods/functions to os. This makes it much clearer to disambiguate with the swarm
"platform" which is really os/arch. This is a stepping stone to getting the daemon towards
fully multi-platform/arch-aware, and makes it clear when "operating system" is being
referred to rather than "platform" which is misleadingly used - sometimes in the swarm
meaning, but more often as just the operating system.
The `/info` endpoint was badly documented, missing various
fields and incorrectly describing others.
This patch defines a type for the endpoint, based on the
API types in the source.
Also removing the response example in favor of
per-field examples, as this prevents an incorrectly
formatted response from masking omissions in the
actual type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `Node.ManagerStatus` property was only present in
the example, but not in the definition.
This patch adds definitions for `ManagerStatus`
and `Reachability`, similar to what is used in the
code;
f02a5b50c4/api/types/swarm/node.go (L84-L101)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- `TLSInfo` is part of `Node.Description`, but was documented as a
direct child of `Node`
- `Node.TLSInfo` incorrectly was using the `SwarmSpec` type,
instead of `TLSInfo`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- `ObjectVersion.Index` is an `uint64` 0fd90c4d5d/api/types/swarm/common.go (L5-L15)
- `ClusterInfo` is nullable in the `/info` output (see ff4f700f74/api/types/swarm/swarm.go (L203))
- `CAConfig.ForceRotate` was missing a type, therefore treated as an `object` in Swagger: ff4f700f74/api/types/swarm/swarm.go (L121)
- `Raft.SnapshotInterval`, `Raft.KeepOldSnapshots`, and `Raft.LogEntriesForSlowFollowers` are an `uint64` not an `int64`
- Various fields in `swarm.Info` are nullable; added `x-nullable`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch updates the definition of `NetworkConfig` to match the code, and
renames to the definition to `NetworkSettings` (also to match the type in
the code).
Add definitions for:
- `Address`
- `PortMap`
- `PortBinding`
- `EndpointIPAMConfig`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since the commit d88fe447df ("Add support for sharing /dev/shm/ and
/dev/mqueue between containers") container's /dev/shm is mounted on the
host first, then bind-mounted inside the container. This is done that
way in order to be able to share this container's IPC namespace
(and the /dev/shm mount point) with another container.
Unfortunately, this functionality breaks container checkpoint/restore
(even if IPC is not shared). Since /dev/shm is an external mount, its
contents is not saved by `criu checkpoint`, and so upon restore any
application that tries to access data under /dev/shm is severily
disappointed (which usually results in a fatal crash).
This commit solves the issue by introducing new IPC modes for containers
(in addition to 'host' and 'container:ID'). The new modes are:
- 'shareable': enables sharing this container's IPC with others
(this used to be the implicit default);
- 'private': disables sharing this container's IPC.
In 'private' mode, container's /dev/shm is truly mounted inside the
container, without any bind-mounting from the host, which solves the
issue.
While at it, let's also implement 'none' mode. The motivation, as
eloquently put by Justin Cormack, is:
> I wondered a while back about having a none shm mode, as currently it is
> not possible to have a totally unwriteable container as there is always
> a /dev/shm writeable mount. It is a bit of a niche case (and clearly
> should never be allowed to be daemon default) but it would be trivial to
> add now so maybe we should...
...so here's yet yet another mode:
- 'none': no /dev/shm mount inside the container (though it still
has its own private IPC namespace).
Now, to ultimately solve the abovementioned checkpoint/restore issue, we'd
need to make 'private' the default mode, but unfortunately it breaks the
backward compatibility. So, let's make the default container IPC mode
per-daemon configurable (with the built-in default set to 'shareable'
for now). The default can be changed either via a daemon CLI option
(--default-shm-mode) or a daemon.json configuration file parameter
of the same name.
Note one can only set either 'shareable' or 'private' IPC modes as a
daemon default (i.e. in this context 'host', 'container', or 'none'
do not make much sense).
Some other changes this patch introduces are:
1. A mount for /dev/shm is added to default OCI Linux spec.
2. IpcMode.Valid() is simplified to remove duplicated code that parsed
'container:ID' form. Note the old version used to check that ID does
not contain a semicolon -- this is no longer the case (tests are
modified accordingly). The motivation is we should either do a
proper check for container ID validity, or don't check it at all
(since it is checked in other places anyway). I chose the latter.
3. IpcMode.Container() is modified to not return container ID if the
mode value does not start with "container:", unifying the check to
be the same as in IpcMode.IsContainer().
3. IPC mode unit tests (runconfig/hostconfig_test.go) are modified
to add checks for newly added values.
[v2: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-51345997]
[v3: addressed review at https://github.com/moby/moby/pull/34087#pullrequestreview-53902833]
[v4: addressed the case of upgrading from older daemon, in this case
container.HostConfig.IpcMode is unset and this is valid]
[v5: document old and new IpcMode values in api/swagger.yaml]
[v6: add the 'none' mode, changelog entry to docs/api/version-history.md]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This adds the new `CreatedAt` field to the API version history
and updates some examples to show this information.
The `CreatedAt` field was implemented in a46f757c40
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Enables other subsystems to watch actions for a plugin(s).
This will be used specifically for implementing plugins on swarm where a
swarm controller needs to watch the state of a plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
COmmit 0307fe1a0b added
a new `DataPathAddr` property to the swarm/init and swarm/join
endpoints. This property was not yet added to the
documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to add a `scope` in the query of `/networks/<id>`
(`NetworkInspect`) so that in case of duplicate network names,
it is possible to locate the network ID based on the network
scope (`local`, 'swarm', or `global`).
Multiple networks might exist in different scopes, which is a legitimate case.
For example, a network name `foo` might exists locally and in swarm network.
However, before this PR it was not possible to query a network name `foo`
in a specific scope like swarm.
This fix fixes the issue by allowing a `scope` query in `/networks/<id>`.
Additional test cases have been added to unit tests and integration tests.
This fix is related to docker/cli#167, moby/moby#30897, moby/moby#33561, moby/moby#30242
This fix fixesdocker/cli#167
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
With the Moby/Docker split, no decisions have been
made yet how, and when to bump the API version.
Although these decisions should not be lead
by Docker releases, I'm bumping the API version
to not complicate things for now; after this bump
we should make a plan how to handle this in future
(for example, using SemVer for the REST api, and
bump with every change).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
