Calling function returned from setupTest (which calls testEnv.Clean) in
a defer block inside a test that spawns parallel subtests caused the
cleanup function to be called before any of the subtest did anything.
Change the defer expressions to use `t.Cleanup` instead to call it only
after all subtests have also finished.
This only changes tests which have parallel subtests.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This field was added in f0e5b3d7d8 to
account for older versions of the engine (Docker EE LTS versions), which
did not yet provide the OSType field in Docker info, and had to be manually
set using the TEST_OSTYPE env-var.
This patch removes the field in favor of the equivalent in DaemonInfo. It's
more verbose, but also less ambiguous what information we're using (i.e.,
the platform the daemon is running on, not the local platform).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
integration/config/config_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/secret/secret_test.go:106:31: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:58:50: empty-lines: extra empty line at the end of a block (revive)
integration/network/service_test.go:401:58: empty-lines: extra empty line at the end of a block (revive)
integration/system/event_test.go:30:38: empty-lines: extra empty line at the end of a block (revive)
integration/plugin/logging/read_test.go:19:41: empty-lines: extra empty line at the end of a block (revive)
integration/service/list_test.go:30:48: empty-lines: extra empty line at the end of a block (revive)
integration/service/create_test.go:400:46: empty-lines: extra empty line at the start of a block (revive)
integration/container/logs_test.go:156:42: empty-lines: extra empty line at the end of a block (revive)
integration/container/daemon_linux_test.go:135:44: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:160:62: empty-lines: extra empty line at the end of a block (revive)
integration/container/wait_test.go:181:47: empty-lines: extra empty line at the end of a block (revive)
integration/container/restart_test.go:116:30: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a ReadJSON() utility to help reduce some code-duplication,
and to make sure we handle JSON requests consistently (e.g. always
check for the content-type).
Differences compared to current handling:
- prevent possible panic if request.Body is nil ("should never happen")
- always require Content-Type to be "application/json"
- be stricter about additional content after JSON (previously ignored)
- but, allow the body to be empty (an empty body is not invalid);
update TestContainerInvalidJSON accordingly, which was testing the
wrong expectation.
- close body after reading (some code did this)
We should consider to add a "max body size" on this function, similar to
7b9275c0da/api/server/middleware/debug.go (L27-L40)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Otherwise errors within this function will all show to be at the line
number of the utility, instead of where it failed in the test:
=== RUN TestDaemonDefaultNetworkPools
service_test.go:23: assertion failed:
Command: ip link delete docker0
ExitCode: 127
Error: exec: "ip": executable file not found in $PATH
Stdout:
Stderr:
Failures:
ExitCode was 127 expected 0
Expected no error
=== RUN TestDaemonRestartWithExistingNetwork
service_test.go:23: assertion failed:
Command: ip link delete docker0
ExitCode: 127
Error: exec: "ip": executable file not found in $PATH
Stdout:
Stderr:
Failures:
ExitCode was 127 expected 0
Expected no error
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Discovered a few instances, where loop variable is incorrectly used
within a test closure, which is marked as parallel.
Few of these were actually loops over singleton slices, therefore the issue
might not have surfaced there (yet), but it is good to fix there as
well, as this is an incorrect pattern used across different tests.
Signed-off-by: Roman Volosatovs <roman.volosatovs@docker.com>
This adds a regression test for https://github.com/moby/moby/issues/24595
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER='TestNetworkList' test-integration
INFO: Testing against a local daemon
=== RUN TestNetworkList
=== RUN TestNetworkList//networks
=== PAUSE TestNetworkList//networks
=== RUN TestNetworkList//networks/
=== PAUSE TestNetworkList//networks/
=== CONT TestNetworkList//networks
=== CONT TestNetworkList//networks/
--- PASS: TestNetworkList (0.05s)
--- PASS: TestNetworkList//networks/ (0.01s)
--- PASS: TestNetworkList//networks (0.01s)
PASS
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
Dont assign the --bip value directly to the subnet
for the default bridge. Instead use the network value
from the ParseCIDR output
Addresses: https://github.com/moby/moby/issues/40392
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Bumps the vendoring of github.com/docker/swarmkit to the above commit,
which is the current master at commit time.
Most notably, this includes a change making the ingress network respect
the default address pool. Because of this change, a change to network
integration tests was needed.
Signed-off-by: Drew Erny <drew.erny@docker.com>
The linter marked an issue because testMacvlanMultiSubnet was not used.
Re-enabling the test showed that there was a typo in the assert, causing the
test to fail:
```
--- FAIL: TestDockerNetworkMacvlan/MultiSubnet (4.74s)
macvlan_test.go:243: assertion failed: 2001:db8:abc4::254 (c3.NetworkSettings.Networks["dualstackbridge"].IPv6Gateway string) != 2001:db8.abc4::254 (string)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
1.This commit replaces serviceRunningCount with
swarm.RunningTasksCount to accurately check if the
service is running with the accurate number of instances
or not. serviceRunningCount was only checking the ServiceList
and was not checking if the tasks were running or not
This adds a safe barrier to execute docker network inspect
commands for overlay networks which get created
asynchronously via Swarm
2. Make sure client connections are closed
3. Make sure every service and network name is unique
4. Make sure services and networks are cleaned up
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Looks like TestServiceWithDefaultAddressPoolInit is failing
randomly in CI. I am not able to reproduce the issue locally
but this has been reported few times. So I tried to modify
code and see if I can fix the random failure.
Signed-off-by: selansen <elango.siva@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon requires kernel 3.10 or up to start, so there's no need
to check if the daemon is kernel 3.8 or up.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Ref: #39426
This is a common flaky test that I have seen on multiple PRs. It is not
consistent and should be skipped until it is fixed to be robust. A
simple fix for the swarm tests is not easy as they all poll and have 1
billion timeouts in all the tests so a skip is valid here.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Co-Authored-By: Jim Ehrismann <jim-docker@users.noreply.github.com>
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: Jim Ehrismann <jim.ehrismann@docker.com>
This fix moves multiple places of serviceRunningTasksCount
to one location in integration/internal/swarm, so that
code duplication could be removed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This introduces `NoTasksForService` and `NoTasks` poller checks, that
can be used to check if no tasks are left in general, or for a specific
service.
Some redundant checks were also removed from some tests.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Clean up and refactor this test;
- make `serviceRunningTasksCount` to use a `desired-state` filter
- use subtests, and inline the `validNetworkVerbose` checks; also use
asserts for the individual checks, so that any failure will log exactly
what failed
- remove helper functions that are no longer needed
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
