Now that most uses of reexec have been replaced with non-reexec
solutions, most of the reexec.Init() calls peppered throughout the test
suites are unnecessary. Furthermore, most of the reexec.Init() calls in
test code neglects to check the return value to determine whether to
exit, which would result in the reexec'ed subprocesses proceeding to run
the tests, which would reexec another subprocess which would proceed to
run the tests, recursively. (That would explain why every reexec
callback used to unconditionally call os.Exit() instead of returning...)
Remove unneeded reexec.Init() calls from test and example code which no
longer needs it, and fix the reexec.Init() calls which are not inert to
exit after a reexec callback is invoked.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Without (*Controller).ReloadConfiguration, the only way to configure
datastore scopes would be by passing config.Options to libnetwork.New.
The only options defined which relate to datastore scopes are limited to
configuring the local-scope datastore. Furthermore, the default
datastore config only defines configuration for the local-scope
datastore. The local-scope datastore is therefore the only datastore
scope possible in libnetwork. Start removing code which is only
needed to support multiple datastore scopes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Basically every exported method which takes a libnetwork.Sandbox
argument asserts that the value's concrete type is *sandbox. Passing any
other implementation of the interface is a runtime error! This interface
is a footgun, and clearly not necessary. Export and use the concrete
type instead.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Trying to remove the "docker.io" domain from locations where it's not relevant.
In these cases, this domain was used as a "random" domain for testing or example
purposes.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Now that this function is only ever called from contexts where a
*testing.T value is available, several improvements can be made to it.
Refactor it to be a test helper function so that callers do not need to
check and fail the test themselves. Leverage t.TempDir() so that the
temporary file is cleaned up automatically. Change it to return a single
config.Option to get better ergonomics at call sites.
Signed-off-by: Cory Snider <csnider@mirantis.com>
TestParallel has been written in an unusual style which relies on the
testing package's intra-test parallelism feature and lots of global
state to test one thing using three cooperating parallel tests. It is
complicated to reason about and quite brittle. For example, the command
go test -run TestParallel1 ./libnetwork
would deadlock, waiting until the test timeout for TestParallel2 and
TestParallel3 to run. And the test would be skipped if the
'-test.parallel' flag was less than three, either explicitly or
implicitly (default: GOMAXPROCS).
Overhaul TestParallel to address the aforementioned deficiencies and
get rid of mutable global state.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Reusing the same "OS context" (read: network namespace) and
NetworkController across multiple tests risks tests interfering with
each other, or worse: _depending on_ other tests to set up
preconditions. Construct a new controller for every test which needs
one, and run every test which mutates or inspects the host environment
in a fresh OS context.
The only outlier is runParallelTests. It is the only remaining test
implementation which references the "global" package-scoped controller,
so the global controller instance is effectively private to that one
test.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Sharing a single NetworkController instance between multiple tests
makes it possible for tests to interfere with each other. As a first
step towards giving each test its own private controller instance, make
explicit which controller createTestNetwork() creates the test network
on.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The SetupTestOSContext calls were made conditional in
https://github.com/moby/libnetwork/pull/148 to work around limitations
in runtime.LockOSThread() which existed before Go 1.10. This workaround
is no longer necessary now that runtime.UnlockOSThread() needs to be
called an equal number of times before the goroutine is unlocked from
the OS thread.
Unfortunately some tests break when SetupTestOSContext is not skipped.
(Evidently this code path has not been exercised in a long time.) A
newly-created network namespace is very barebones: it contains a
loopback interface in the down state and little else. Even pinging
localhost does not work inside of a brand new namespace. Set the
loopback interface to up during namespace setup so that tests which
need to use the loopback interface can do so.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit b1a3fe4934 changed how the error was
returned (which is now wrapped), causing the test to fail:
=== RUN TestInvalidRemoteDriver
libnetwork_test.go:1289: Did not fail with expected error. Actual error: Plugin does not implement the requested driver: plugin="invalid-network-driver", requested implementation="NetworkDriver"
--- FAIL: TestInvalidRemoteDriver (0.01s)
Changing the test to use errors.Is()
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
libnetwork does different stuff depending on if you are running the
tests in a container or not... without telling it we are in a container
a bunch of the tests actually fail.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Make `docker run -p 80:80` functional again on environments with kernel boot parameter `ipv6.disable=1`.
Fix moby/moby issue 42288
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
1. Allocate either a IPv4 and/or IPv6 Port Binding (HostIP, HostPort, ContainerIP,
ContainerPort) based on the input and system parameters
2. Update the userland proxy as well as dummy proxy (inside port mapper) to
specifically listen on either the IPv4 or IPv6 network
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
This test was producing error messages due to missing endpoints
in the plugin API;
```
=== RUN TestValidRemoteDriver
ERRO[0039] error getting capability for valid-network-driver due to NetworkDriver.GetCapabilities: 404 page not found
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- They are configuration-only networks which
can be used to supply the configuration
when creating regular networks.
- They do not get allocated and do net get plumbed.
Drivers do not get to know about them.
- They can be removed, once no other network is
using them.
- When user creates a network specifying a
configuration network for the config, no
other network specific configuration field
is are accepted. User can only specify
network operator fields (attachable, internal,...)
- They do not need to have a driver field, that
field gets actually reset upon creation.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Also fix import name to use original project name 'logrus' instead of
'log'
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
* TestwriteJSON and TestontainerInvalidLeave were never executed due to the typos. Recent govet found them.
* TestWriteJSON was failing due to the comparison between string and []byte. Also, it didn't considered that json.Encode appends LF.
* TestContainerInvalidLeave was faling due to a typo
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
