Fixes#22564
When an error occurs on mount, there should not be any call later to
unmount. This can throw off refcounting in the underlying driver
unexpectedly.
Consider these two cases:
```
$ docker run -v foo:/bar busybox true
```
```
$ docker run -v foo:/bar -w /foo busybox true
```
In the first case, if mounting `foo` fails, the volume driver will not
get a call to unmount (this is the incorrect behavior).
In the second case, the volume driver will not get a call to unmount
(correct behavior).
This occurs because in the first case, `/bar` does not exist in the
container, and as such there is no call to `volume.Mount()` during the
`create` phase. It will error out during the `start` phase.
In the second case `/bar` is created before dealing with the volume
because of the `-w`. Because of this, when the volume is being setup
docker will try to copy the image path contents in the volume, in which
case it will attempt to mount the volume and fail. This happens during
the `create` phase. This makes it so the container will not be created
(or at least fully created) and the user gets the error on `create`
instead of `start`. The error handling is different in these two phases.
Changed to only send `unmount` if the volume is mounted.
While investigating the cause of the reported issue I found some odd
behavior in unmount calls so I've cleaned those up a bit here as well.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When a conflict is found in the volume cache, check with the driver if
that volume still actually exists.
If the volume doesn't exist, purge it from the cache and allow the
create to happen.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 25545 where
volume options at the creation time is not showed up
in `docker volume inspect`.
This fix adds the field `Options` in `Volume` type and
persist the options in volume db so that `volume inspect`
could display the options.
This fix adds a couple of test cases to cover the changes.
This fix fixes 25545.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Found a couple of places where pretty low level errors were never being
wrapped with any sort of context.
For example, if you try to create a local volume using some bad mount
options, the kernel will return `invalid argument` when we try to mount
it at container start.
What would happen is a user would `docker run` with this volume and get
an error like `Error response from daemon: invalid argument`.
This uses github.com/pkg/errors to provide some context to the error
message without masking the original error.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
As part of making graphdrivers support pluginv2, a PluginGetter
interface was necessary for cleaner separation and avoiding import
cycles.
This commit creates a PluginGetter interface and makes pluginStore
implement it. Then the pluginStore object is created in the daemon
(rather than by the plugin manager) and passed to plugin init as
well as to the different subsystems (eg. graphdrivers, volumedrivers).
A side effect of this change was that some code was moved out of
experimental. This is good, since plugin support will be stable soon.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
`Mounts` allows users to specify in a much safer way the volumes they
want to use in the container.
This replaces `Binds` and `Volumes`, which both still exist, but
`Mounts` and `Binds`/`Volumes` are exclussive.
The CLI will continue to use `Binds` and `Volumes` due to concerns with
parsing the volume specs on the client side and cross-platform support
(for now).
The new API follows exactly the services mount API.
Example usage of `Mounts`:
```
$ curl -XPOST localhost:2375/containers/create -d '{
"Image": "alpine:latest",
"HostConfig": {
"Mounts": [{
"Type": "Volume",
"Target": "/foo"
},{
"Type": "bind",
"Source": "/var/run/docker.sock",
"Target": "/var/run/docker.sock",
},{
"Type": "volume",
"Name": "important_data",
"Target": "/var/data",
"ReadOnly": true,
"VolumeOptions": {
"DriverConfig": {
Name: "awesomeStorage",
Options: {"size": "10m"},
Labels: {"some":"label"}
}
}]
}
}'
```
There are currently 2 types of mounts:
- **bind**: Paths on the host that get mounted into the
container. Paths must exist prior to creating the container.
- **volume**: Volumes that persist after the
container is removed.
Not all fields are available in each type, and validation is done to
ensure these fields aren't mixed up between types.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
daemon/events/testutils: rename eventstestutils to testutils
volume/testutils: rename volumetestutils to testutils
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This makes sure that:
1. Already existing directories are left untouched
2. Newly created directories are chowned to the correct root UID/GID in case of user namespaces
3. All parent directories still get created with host root UID/GID
Fix#21738
Signed-off-by: Antonis Kalipetis <akalipetis@gmail.com>
Split plugin package into `store` and `v2/plugin`. Now the functionality
is clearly delineated:
- Manager: Manages the global state of the plugin sub-system.
- PluginStore: Manages a collection of plugins (in memory and on-disk)
- Plugin: Manages the single plugin unit.
This also facilitates splitting the global PluginManager lock into:
- PluginManager lock to protect global states.
- PluginStore lock to protect store states.
- Plugin lock to protect individual plugin states.
Importing "github.com/docker/docker/plugin/store" will provide access
to plugins and has lesser dependencies when compared to importing the
original monolithic `plugin package`.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix tries to address the issue in raised #23367 where an out-of-band
volume driver deletion leaves some data in docker. This prevent the
reuse of deleted volume names (by out-of-band volume driver like flocker).
This fix adds a `--force` field in `docker volume rm` to forcefully purge
the data of the volume that has already been deleted.
Related documentations have been updated.
This fix is tested manually with flocker, as is specified in #23367.
An integration test has also been added for the scenario described.
This fix fixes#23367.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
When the daemon is started, it looks at all the volumes and checks to
see if any of them have mount options persisted to disk, and loads them
from disk if it does.
In some cases a volume will be created with an empty map causing the
options file to be persisted and volume options set to a non-nil value
on daemon restart... this causes problems later when the driver checks
for a non-nil value to determine if it should try and mount with the
persisted volume options.
Ensures 2 things:
1. Instead of only checking nilness for the opts map, use `len` to make
sure it is not an empty map, which we don't really need to persit.
2. An empty (or nulled) opts.json will not inadvertnatly set volume
options on daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
this improves the error message if a user tries to
create a volume with a single-character name:
Before this change:
docker volume create --name a
Error response from daemon: create a: "a" includes invalid characters for a local volume name, only "[a-zA-Z0-9][a-zA-Z0-9_.-]" are allowed
After this change:
docker volume create --name a
Error response from daemon: create a: volume name is too short, names should be at least two alphanumeric characters
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
On daemon restart the local volume driver will read options that it
persisted to disk, however it was reading an incorrect path, causing
volume options to be silently ignored after a daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
these values were changed to lowercase in
690cb2d08c,
but not changed accordingly in docker/docker.
this changes the mounttypes to lowercase
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Legacy plugin model maintained a map of plugins. This is
not used by the new model. Using this map in the new model
causes incorrect lookup of plugins. This change uses adds
a plugin to the map only if its legacy.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This patch introduces a new experimental engine-level plugin management
with a new API and command line. Plugins can be distributed via a Docker
registry, and their lifecycle is managed by the engine.
This makes plugins a first-class construct.
For more background, have a look at issue #20363.
Documentation is in a separate commit. If you want to understand how the
new plugin system works, you can start by reading the documentation.
Note: backwards compatibility with existing plugins is maintained,
albeit they won't benefit from the advantages of the new system.
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This is similar to network scopes where a volume can either be `local`
or `global`. A `global` volume is one that exists across the entire
cluster where as a `local` volume exists on a single engine.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In order to be consistent on creation of volumes for bind mounts
we need to create the source directory if it does not exist and the
user specified he wants it relabeled.
Can not do this lower down the stack, since we are not passing in the
mode fields.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Auto-creation of host-paths has been un-deprecated,
so to have feature-parity between Linux and Windows,
this feature should also be present on Windows.
This enables auto-creation on Windows.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
