No more concept of "anonymous endpoints". The equivalent is now an
endpoint with no DNSNames set.
Some of the code removed by this commit was mutating user-supplied
endpoint's Aliases to add container's short ID to that list. In order to
preserve backward compatibility for the ContainerInspect endpoint, this
commit also takes care of adding that short ID (and the container
hostname) to `EndpointSettings.Aliases` before returning the response.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Calculate the IPv6 addreesses needed on a bridge, then reconcile them
with the addresses on an existing bridge by deleting then adding as
required.
(Previously, required addresses were added one-by-one, then unwanted
addresses were removed. This meant the daemon failed to start if, for
example, an existing bridge had address '2000:db8::/64' and the config
was changed to '2000:db8::/80'.)
IPv6 addresses are now calculated and applied in one go, so there's no
need for setupVerifyAndReconcile() to check the set of IPv6 addresses on
the bridge. And, it was guarded by !config.InhibitIPv4, which can't have
been right. So, removed its IPv6 parts, and added IPv4 to its name.
Link local addresses, the example given in the original ticket, are now
released when containers are stopped. Not releasing them meant that
when using an LL subnet on the default bridge, no container could be
started after a container was stopped (because the calculated address
could not be re-allocated). In non-default bridge networks using an
LL subnet, addresses leaked.
Linux always uses the standard 'fe80::/64' LL network. So, if a bridge
is configured with an LL subnet prefix that overlaps with it, a config
error is reported. Non-overlapping LL subnet prefixes are allowed.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Isolate the prune effects by running the test in a separate daemon.
This minimizes the impact of/on other integration tests.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Rewrite `.build-empty-images` shell script that produced special images
(emptyfs with no layers, and empty danglign image) to a Go functions
that construct the same archives in a temporary directory.
Use them to load these images on demand only in the tests that need
them.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
These tests build new images, setupTest sets up the test cleanup
function that clears the test environment from created images,
containers, etc.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This removes various skips that accounted for running the integration tests
against older versions of the daemon before 20.10 (API version v1.41). Those
versions are EOL, and we don't run tests against them.
This reverts most of e440831802, and similar
PRs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was using API version 1.20 to test old behavior, but the actual change
in behavior was API v1.25; see commit 6d98e344c7
and 63b5a37203.
This updates the test to use API v1.24 to test the old behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
TestKillDifferentUserContainer was migrated from integration-cli in
commit 0855922cd3. Before migration, it
was not using a specific API version, so we can assume "current"
API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Replace `time.Sleep` with a poll that checks if process no longer exists
to avoid possible race condition.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
When live-restore is enabled, containers with autoremove enabled
shouldn't be forcibly killed when engine restarts.
They still should be removed if they exited while the engine was down
though.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This is purely cosmetic - if a non-default MTU is configured, the bridge
will have the default MTU=1500 until a container's 'veth' is connected
and an MTU is set on the veth. That's a disconcerting, it looks like the
config has been ignored - so, set the bridge's MTU explicitly.
Fixes#37937
Signed-off-by: Rob Murray <rob.murray@docker.com>
The graphdriver implementation sets the ModTime of all image content to
match the `Created` time from the image config, whereas the containerd's
archive export code just leaves it empty (zero).
Adjust the test in the case where containerd integration is enabled to
check if config file ModTime is equal to zero (UNIX epoch) instead.
This behaviour is not a part of the Docker Image Specification and the
intention behind introducing it was to make the `docker save` produce
the same archive regardless of the time it was performed.
It would also be a bit problematic with the OCI archive layout which can
contain multiple images referencing the same content.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This test broke in 98323ac114.
This commit renamed WithMacAddress into WithContainerWideMacAddress.
This helper sets the MacAddress field in container.Config. However, API
v1.44 now ignores this field if the NetworkMode has no matching entry in
EndpointsConfig.
This fix uses the helper WithMacAddress and specify for which
EndpointConfig the MacAddress is specified.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This test was rewritten from an integration-cli test in commit
68d9beedbe, and originally implemented in
f4942ed864, which rewrote it from a unit-
test to an integration test.
Originally, it would check for the raw JSON response from the daemon, and
check for individual fields to be present in the output, but after commit
0fd5a65428, `client.Info()` was used, and
now the response is unmarshalled into a `system.Info`.
The remainder of the test remained the same in that rewrite, and as a
result were were now effectively testing if a `system.Info` struct,
when marshalled as JSON would show all the fields (surprise: it does).
TL;DR; the test would even pass with an empty `system.Info{}` struct,
which didn't provide much coverage, as it passed without a daemon:
func TestInfoAPI(t *testing.T) {
// always shown fields
stringsToCheck := []string{
"ID",
"Containers",
"ContainersRunning",
"ContainersPaused",
"ContainersStopped",
"Images",
"LoggingDriver",
"OperatingSystem",
"NCPU",
"OSType",
"Architecture",
"MemTotal",
"KernelVersion",
"Driver",
"ServerVersion",
"SecurityOptions",
}
out := fmt.Sprintf("%+v", system.Info{})
for _, linePrefix := range stringsToCheck {
assert.Check(t, is.Contains(out, linePrefix))
}
}
This patch makes the test _slightly_ better by checking if the fields
are non-empty. More work is needed on this test though; currently it
uses the (already running) daemon, so it's hard to check for specific
fields to be correct (withouth knowing state of the daemon), but it's
not unlikely that other tests (partially) cover some of that. A TODO
comment was added to look into that (we should probably combine some
tests to prevent overlap, and make it easier to spot "gaps" as well).
While working on this, also moving the `SystemTime` into this test,
because that field is (no longer) dependent on "debug" state
(It is was actually this change that led me down this rabbit-hole)
()_()
(-.-)
'(")(")'
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Following tests are implemented in this specific commit:
- Inter-container communications for internal and non-internal
bridge networks, over IPv4 and IPv6.
- Inter-container communications using IPv6 link-local addresses for
internal and non-internal bridge networks.
- Inter-network communications for internal and non-internal bridge
networks, over IPv4 and IPv6, are disallowed.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This commit introduces a new integration test suite aimed at testing
networking features like inter-container communication, network
isolation, port mapping, etc... and how they interact with daemon-level
and network-level parameters.
So far, there's pretty much no tests making sure our networks are well
configured: 1. there're a few tests for port mapping, but they don't
cover all use cases ; 2. there're a few tests that check if a specific
iptables rule exist, but that doesn't prevent that specific iptables
rule to be wrong in the first place.
As we're planning to refactor how iptables rules are written, and change
some of them to fix known security issues, we need a way to test all
combinations of parameters. So far, this was done by hand, which is
particularly painful and time consuming. As such, this new test suite is
foundational to upcoming work.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This delete was originally added in b37fdc5dd1
and migrated from `deleteImages(repoName)` in commit 1e55ace875,
however, deleting `foobar-save-multi-images-test` (`foobar-save-multi-images-test:latest`)
always resulted in an error;
Error response from daemon: No such image: foobar-save-multi-images-test:latest
This patch removes the redundant image delete.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Shutting down containers on Windows can take a long time (with hyper-v),
causing this test to be flaky; seen failing on windows 2022;
=== FAIL: github.com/docker/docker/integration/image TestSaveRepoWithMultipleImages (23.16s)
save_test.go:104: timeout waiting for container to exit
Looking at the test, we run a container only to commit it, and the test
does not make changes to the container's filesystem; it only runs a container
with a custom command (`true`).
Instead of running the container, we can _create_ a container and commit it;
this simplifies the tests, and prevents having to wait for the container to
exit (before committing).
To verify:
make BIND_DIR=. DOCKER_GRAPHDRIVER=vfs TEST_FILTER=TestSaveRepoWithMultipleImages test-integration
INFO: Testing against a local daemon
=== RUN TestSaveRepoWithMultipleImages
--- PASS: TestSaveRepoWithMultipleImages (1.20s)
PASS
DONE 1 tests in 2.668s
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds test ensuring that additional groups set with `--group-add`
are kept on exec when container had `--user` set on run.
Regression test for https://github.com/moby/moby/issues/46712
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
commit def549c8f6 passed through the context
to the daemon.ContainerStart function. As a result, restarting containers
no longer is an atomic operation, because a context cancellation could
interrupt the restart (between "stopping" and "(re)starting"), resulting
in the container being stopped, but not restarted.
Restarting a container, or more factually; making a successful request on
the `/containers/{id]/restart` endpoint, should be an atomic operation.
This patch uses a context.WithoutCancel for restart requests.
It's worth noting that daemon.containerStop already uses context.WithoutCancel,
so in that function, we'll be wrapping the context twice, but this should
likely not cause issues (just redundant for this code-path).
Before this patch, starting a container that bind-mounts the docker socket,
then restarting itself from within the container would cancel the restart
operation. The container would be stopped, but not started after that:
docker run -dit --name myself -v /var/run/docker.sock:/var/run/docker.sock docker:cli sh
docker exec myself sh -c 'docker restart myself'
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
3a2a741c65ff docker:cli "docker-entrypoint.s…" 26 seconds ago Exited (128) 7 seconds ago myself
With this patch: the stop still cancels the exec, but does not cancel the
restart operation, and the container is started again:
docker run -dit --name myself -v /var/run/docker.sock:/var/run/docker.sock docker:cli sh
docker exec myself sh -c 'docker restart myself'
docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
4393a01f7c75 docker:cli "docker-entrypoint.s…" About a minute ago Up 4 seconds myself
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Check for accurate values that may contain content sizes unknown to the
usage test in the calculation. Avoid asserting using deep equals when
only the expected value range is known to the test.
Signed-off-by: Derek McGowan <derek@mcg.dev>
We support importing images for other platforms when
using the containerd image store, so we shouldn't validate
the image OS on import.
This commit also splits the test into two, so that we can
keep running the "success" import with a custom platform tests
running w/ c8d while skipping the "error/rejection" test cases.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This is a follow-up to 2216d3ca8d, which
implemented the StartInterval for health-checks, but did not add validation
for the minimum accepted interval;
> The time to wait between checks in nanoseconds during the start period.
> It should be 0 or at least 1000000 (1 ms). 0 means inherit.
This patch adds validation for the minimum accepted interval (1ms).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a behavior from the graphdriver's export where `docker save
something` (untagged reference) would export all images matching the
specified repository.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
