libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit cd381aea56)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function effectively is a constructor, so rename it to better describe
it's functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 267108e113)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It was unclear what the distinction was between these configuration
structs, so merging them to simplify.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 528428919e)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a8a8bd1e42)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 4f08346686)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
relates to #35082, moby/libnetwork#2491
Previously, values for expire_quiescent_template, conn_reuse_mode,
and expire_nodest_conn were set only system-wide. Also apply them
for new lb_* and ingress_sbox sandboxes, so they are appropriately
propagated
Signed-off-by: Ryan Barry <rbarry@mirantis.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This function always returned `nil`, so we can remove the error
return, and update other functions that were handling errors.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This PR carryforwards https://github.com/moby/libnetwork/pull/2239
and incorporates the suggestions in comments to fix the NPE and
potential NPEs due to a null value returned by ep.Iface()
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
This fix addresses https://docker.atlassian.net/browse/ENGCORE-1115
Expected behaviors upon docker engine restarts:
1. IPTableEnable=true, DOCKER-USER chain present
-- no change to DOCKER-USER chain
2. IPTableEnable=true, DOCKER-USER chain not present
-- DOCKER-USER chain created and inserted top of FORWARD
chain.
3. IPTableEnable=false, DOCKER-USER chain present
-- no change to DOCKER-USER chain
the rational is that DOCKER-USER is populated
and may be used by end-user for purpose other than
filtering docker container traffic. Thus even if
IPTableEnable=false, docker engine does not touch
pre-existing DOCKER-USER chain.
4. IPTableEnable=false, DOCKER-USER chain not present
-- DOCKER-USER chain is not created.
Signed-off-by: Su Wang <su.wang@docker.com>
This commit carries forward the work done in
https://github.com/docker/libnetwork/pull/2295
and fixes two things
1. Allows macvlan and ipvlan to be restored properly
after dockerd or the system is restarted
2. Makes sure the refcount for the configOnly network
is not incremented for the above case so this network
can be deleted after all the associated ConfigFrom networks
are deleted
Addresses: https://github.com/docker/libnetwork/issues/1743
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
moby/moby commit b27f70d45 wraps the ErrNotFound error returned when
a plugin cannot be found, to include a backtrace. This changes the
type of the error, so contoller.loadIPAMDriver no longer converts it
to a libnetwork plugin.NotFoundError.
This is a similar patch as was merged in 9b114971e5
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The endpoint count for --config-only networks
was being incremented even when the respective --config-from
inherited network failed to create a network
This was due to a variable shadowing problem with err causing
the deferred function to not execute correctly.
Using the same err variable across the entire function fixes
the issue
Fixes: moby/moby#35101
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Allow DSR to be a configurable option through a generic option to the
overlay driver. On the one hand this approach makes sense insofar as
only overlay networks can currently perform load balancing. On the
other hand, this approach has several issues. First, should we create
another type of swarm scope network, this will prevent it working.
Second, the service core code is separate from the driver code and the
driver code can't influence the core data structures. So the driver
code can't set this option itself. Therefore, implementing in this way
requires some hack code to test for this option in
controller.NewNetwork.
A more correct approach would be to make this a generic option for any
network. Then the driver could ignore, reject or be unaware of the option
depending on the chosen model. This would require changes to:
* libnetwork - naturally
* the docker API - to carry the option
* swarmkit - to propagate the option
* the docker CLI - to support the option
* moby - to translate the API option into a libnetwork option
Given the urgency of requests to address this issue, this approach will
be saved for a future iteration.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Change the sandbox IDs for the sandboxes of load-balancing endpoints to
be "lb_XXXXXXXXX" where XXXXXXXXX is the network ID that this sandbox
load balances for. This makes it easier to find these sandboxes in
/var/run/docker/netns and thus makes debugging easier.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Refactor the ostweaks file to allows a more easy reuse
Add a method on the osl.Sandbox interface to allow setting
knobs on the sandbox
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This is the heart of the scalability change for services in libnetwork.
The present routing mesh adds load-balancing rules for a network to
every container connected to the network. This newer approach creates a
load-balancing endpoint per network per node. For every service on a
network, libnetwork assigns the VIP of the service to the endpoint's
interface as an alias. This endpoint must have a unique IP address in
order to route return traffic to it. Traffic destined for a service's
VIP arrives at the load-balancing endpoint on the VIP and from there,
Linux load balances it among backend destinations while SNATing said
traffic to the endpoint's unique IP address.
The net result of this scheme is that each node in a swarm need only
have one set of load balancing state per service instead of one per
container on the node. This scheme is very similar to how services
currently operate on Windows nodes in libnetwork. It (as with Windows
nodes) costs the use of extra IP addresses in a network (one per node)
and an extra network hop in the stack, although, always in the stack
local to the container.
In order to prevent existing deployments from suddenly failing if they
failed to allocate sufficient address space to include per-node
load-balancing endpoint IP addresses, this patch preserves the existing
functionality and activates the new functionality on a per-network
basis depending on whether the network has a load-balancing endpoint.
Eventually, moby should always set this option when creating new
networks and should only omit it for networks created as part of a swarm
that are not marked to use endpoint load balancing.
This patch also normalizes the code to treat "load" and "balancer"
as two separate words from the perspectives of variable/function naming.
This means that the 'b' in "balancer" must be capitalized.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
moby/moby commit b27f70d45 wraps the ErrNotFound error returned when
a plugin cannot be found, to include a backtrace. This changes the
type of the error, so contoller.loadDriver no longer converts it to a
libnetwork plugin.NotFoundError. This causes a couple of tests which
inspect the return type to fail; most code only checks whether the
error is non-nil and is not affected by the change in type.
Signed-off-by: Euan Harris <euan.harris@docker.com>
This is new feature that allows user to specify which subnetwork
Docker contrainer should choose from when it creates bridge network.
This libnetwork commit is to address moby PR 36054
Signed-off-by: selansen <elango.siva@docker.com>
This is the right way to call for a clean shutdown
Return application/json as content-type when appropriate
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This commit introduces the possibility to enable a debug mode
for the networkDB, this will allow the opening of a tcp port
on localhost that will expose the networkDB api for debugging
purposes.
The API can be discovered using curl localhost:<port>/help
It support json output if passed json as URL query parameter
option and pretty printing if passing json=pretty
All the binaries values are serialized in base64 encoding, this
can be skip passing the unsafe option as url query parameter
A simple go client will follow up
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Attachable containers they are tasks with no service associated
their cleanup was not done properly so it was possible to have
a leak of their name resolution if that was the last container
on the network.
Cleanupservicebindings was not able to do the cleanup because there
is no service, while also the notification of the delete arrives
after that the network is already being cleaned
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
The commit contains fix for the issue reported in
https://github.com/moby/moby/issues/33415 and
https://github.com/docker/libnetwork/issues/1772. With the
feature introduced to support local scope networks in swarm
mode the network configuration to include ipam driver was overriden
in libnetwork. This has been removed with this fix which will allow
ipam-driver option to be used for task allocation
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
Allow users to configure firewall policies in a way that persists
docker operations/restarts. Docker will not delete or modify any
pre-existing rules from the DOCKER-USER filter chain. This allows
the user to create in advance any rules required to further
restrict access from/to the containers.
Fixesdocker/docker#29184Fixesdocker/docker#23987
Related to docker/docker#24848
Signed-off-by: Jacob Wen <jian.w.wen@oracle.com>
