Configuration over the API per container is intentionally left out for
the time being, but is supported to configure the default from the
daemon config.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit cbecf48bc352e680a5390a7ca9cff53098cd16d7)
Signed-off-by: Madhu Venugopal <madhu@docker.com>
When daemon.ContainerLogs() is called with options.follow=true
(as in "docker logs --follow"), the "loggerutils.followLogs()"
function never returns (even then the logs consumer is gone).
As a result, all the resources associated with it (including
an opened file descriptor for the log file being read, two FDs
for a pipe, and two FDs for inotify watch) are never released.
If this is repeated (such as by running "docker logs --follow"
and pressing Ctrl-C a few times), this results in DoS caused by
either hitting the limit of inotify watches, or the limit of
opened files. The only cure is daemon restart.
Apparently, what happens is:
1. logs producer (a container) is gone, calling (*LogWatcher).Close()
for all its readers (daemon/logger/jsonfilelog/jsonfilelog.go:175).
2. WatchClose() is properly handled by a dedicated goroutine in
followLogs(), cancelling the context.
3. Upon receiving the ctx.Done(), the code in followLogs()
(daemon/logger/loggerutils/logfile.go#L626-L638) keeps to
send messages _synchronously_ (which is OK for now).
4. Logs consumer is gone (Ctrl-C is pressed on a terminal running
"docker logs --follow"). Method (*LogWatcher).Close() is properly
called (see daemon/logs.go:114). Since it was called before and
due to to once.Do(), nothing happens (which is kinda good, as
otherwise it will panic on closing a closed channel).
5. A goroutine (see item 3 above) keeps sending log messages
synchronously to the logWatcher.Msg channel. Since the
channel reader is gone, the channel send operation blocks forever,
and resource cleanup set up in defer statements at the beginning
of followLogs() never happens.
Alas, the fix is somewhat complicated:
1. Distinguish between close from logs producer and logs consumer.
To that effect,
- yet another channel is added to LogWatcher();
- {Watch,}Close() are renamed to {Watch,}ProducerGone();
- {Watch,}ConsumerGone() are added;
*NOTE* that ProducerGone()/WatchProducerGone() pair is ONLY needed
in order to stop ConsumerLogs(follow=true) when a container is stopped;
otherwise we're not interested in it. In other words, we're only
using it in followLogs().
2. Code that was doing (logWatcher*).Close() is modified to either call
ProducerGone() or ConsumerGone(), depending on the context.
3. Code that was waiting for WatchClose() is modified to wait for
either ConsumerGone() or ProducerGone(), or both, depending on the
context.
4. followLogs() are modified accordingly:
- context cancellation is happening on WatchProducerGone(),
and once it's received the FileWatcher is closed and waitRead()
returns errDone on EOF (i.e. log rotation handling logic is disabled);
- due to this, code that was writing synchronously to logWatcher.Msg
can be and is removed as the code above it handles this case;
- function returns once ConsumerGone is received, freeing all the
resources -- this is the bugfix itself.
While at it,
1. Let's also remove the ctx usage to simplify the code a bit.
It was introduced by commit a69a59ffc7 ("Decouple removing the
fileWatcher from reading") in order to fix a bug. The bug was actually
a deadlock in fsnotify, and the fix was just a workaround. Since then
the fsnofify bug has been fixed, and a new fsnotify was vendored in.
For more details, please see
https://github.com/moby/moby/pull/27782#issuecomment-416794490
2. Since `(*filePoller).Close()` is fixed to remove all the files
being watched, there is no need to explicitly call
fileWatcher.Remove(name) anymore, so get rid of the extra code.
Should fix https://github.com/moby/moby/issues/37391
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This code has many return statements, for some of them the
"end logs" or "end stream" message was not printed, giving
the impression that this "for" loop never ended.
Make sure that "begin logs" is to be followed by "end logs".
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Closing the log driver was in a defer meanwhile logs are
collected asyncronously, so the log driver was being closed before reads
were actually finished.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Since Go 1.7, context is a standard package. Since Go 1.9, everything
that is provided by "x/net/context" is a couple of type aliases to
types in "context".
Many vendored packages still use x/net/context, so vendor entry remains
for now.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of having to create a bunch of custom error types that are doing
nothing but wrapping another error in sub-packages, use a common helper
to create errors of the requested type.
e.g. instead of re-implementing this over and over:
```go
type notFoundError struct {
cause error
}
func(e notFoundError) Error() string {
return e.cause.Error()
}
func(e notFoundError) NotFound() {}
func(e notFoundError) Cause() error {
return e.cause
}
```
Packages can instead just do:
```
errdefs.NotFound(err)
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows much of the read logic to be shared for other things,
especially for the new log driver proposed in
https://github.com/moby/moby/issues/33475
The only logic for reads in the json logger is around decoding log
messages, which gets passed into the log file object.
This also helps with implementing compression as it allows us to
simplify locking strategies.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Refactor container logs system to make communicating log messages
internally much simpler. Move responsibility for marshalling log
messages into the REST server. Support TTY logs. Pave the way for fixing
the ambiguous bytestream format. Pave the way for fixing details.
Signed-off-by: Drew Erny <drew.erny@docker.com>
If a container is dead or marked for removal, the json log
file could have been removed, so docker logs will return
`<id>-json.log: no such file or directory`.
Signed-off-by: Lei Jitang <leijitang@huawei.com>
This commit addresses 2 issues:
1. in `tailfile()` if somehow the `logWatcher.Msg` were to become full and the watcher closed before space was made into it, we were getting stuck there forever since we were not checking for the watcher getting closed
2. when servicing `docker logs`, if the command was cancelled we were not closing the watcher (and hence notifying it to stop copying data)
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Signed-off-by: Ke Li <kel@splunk.com>
Add missing changes
Signed-off-by: Ke Li <kel@splunk.com>
User errors.New to create error
Signed-off-by: Ke Li <kel@splunk.com>
The `docker logs` command performed a
client-side check if the container's
logging driver was supported.
Now that we allow the client to connect
to both "older" and "newer" daemon versions,
this check is best done daemon-side.
This patch remove the check on the client
side, and leaves validation to the daemon,
which should be the source of truth.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If "docker logs" was used on an offline container, the logger is leaked, leaving it up to the finalizer to close the file handle, which could block removal of the container. Further, the json file logger could leak an open handle if the logs are read without follow due to an early return without a close. This change addresses both cases.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Log drivers are instantiated on a per-container basis, and passed the
container ID (along with other information) when they're initialized.
Drivers that care about that value are caching the value that they're
passed when they're initialized and using it in favor of the value
contained in Message structures that are passed to them, so the field in
Messages is unused, so we remove it.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
The jsonlog logger currently allows specifying envs and labels that
should be propagated to the log message, however there has been no way
to read that back.
This adds a new API option to enable inserting these attrs back to the
log reader.
With timestamps, this looks like so:
```
92016-04-08T15:28:09.835913720Z foo=bar,hello=world hello
```
The extra attrs are comma separated before the log message but after
timestamps.
Without timestaps it looks like so:
```
foo=bar,hello=world hello
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Docker logs was only closing the logger when the HTTP response writer received a close notification, however in non-follow mode the writer never receives a close. This means that the daemon would leak the file handle to the log, preventing the container from being removed on Windows (file in use error). This change explicitly closes the log when the end of stream is hit.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
Moving all strings to the errors package wasn't a good idea after all.
Our custom implementation of Go errors predates everything that's nice
and good about working with errors in Go. Take as an example what we
have to do to get an error message:
```go
func GetErrorMessage(err error) string {
switch err.(type) {
case errcode.Error:
e, _ := err.(errcode.Error)
return e.Message
case errcode.ErrorCode:
ec, _ := err.(errcode.ErrorCode)
return ec.Message()
default:
return err.Error()
}
}
```
This goes against every good practice for Go development. The language already provides a simple, intuitive and standard way to get error messages, that is calling the `Error()` method from an error. Reinventing the error interface is a mistake.
Our custom implementation also makes very hard to reason about errors, another nice thing about Go. I found several (>10) error declarations that we don't use anywhere. This is a clear sign about how little we know about the errors we return. I also found several error usages where the number of arguments was different than the parameters declared in the error, another clear example of how difficult is to reason about errors.
Moreover, our custom implementation didn't really make easier for people to return custom HTTP status code depending on the errors. Again, it's hard to reason about when to set custom codes and how. Take an example what we have to do to extract the message and status code from an error before returning a response from the API:
```go
switch err.(type) {
case errcode.ErrorCode:
daError, _ := err.(errcode.ErrorCode)
statusCode = daError.Descriptor().HTTPStatusCode
errMsg = daError.Message()
case errcode.Error:
// For reference, if you're looking for a particular error
// then you can do something like :
// import ( derr "github.com/docker/docker/errors" )
// if daError.ErrorCode() == derr.ErrorCodeNoSuchContainer { ... }
daError, _ := err.(errcode.Error)
statusCode = daError.ErrorCode().Descriptor().HTTPStatusCode
errMsg = daError.Message
default:
// This part of will be removed once we've
// converted everything over to use the errcode package
// FIXME: this is brittle and should not be necessary.
// If we need to differentiate between different possible error types,
// we should create appropriate error types with clearly defined meaning
errStr := strings.ToLower(err.Error())
for keyword, status := range map[string]int{
"not found": http.StatusNotFound,
"no such": http.StatusNotFound,
"bad parameter": http.StatusBadRequest,
"conflict": http.StatusConflict,
"impossible": http.StatusNotAcceptable,
"wrong login/password": http.StatusUnauthorized,
"hasn't been activated": http.StatusForbidden,
} {
if strings.Contains(errStr, keyword) {
statusCode = status
break
}
}
}
```
You can notice two things in that code:
1. We have to explain how errors work, because our implementation goes against how easy to use Go errors are.
2. At no moment we arrived to remove that `switch` statement that was the original reason to use our custom implementation.
This change removes all our status errors from the errors package and puts them back in their specific contexts.
IT puts the messages back with their contexts. That way, we know right away when errors used and how to generate their messages.
It uses custom interfaces to reason about errors. Errors that need to response with a custom status code MUST implementent this simple interface:
```go
type errorWithStatus interface {
HTTPErrorStatusCode() int
}
```
This interface is very straightforward to implement. It also preserves Go errors real behavior, getting the message is as simple as using the `Error()` method.
I included helper functions to generate errors that use custom status code in `errors/errors.go`.
By doing this, we remove the hard dependency we have eeverywhere to our custom errors package. Yes, you can use it as a helper to generate error, but it's still very easy to generate errors without it.
Please, read this fantastic blog post about errors in Go: http://dave.cheney.net/2014/12/24/inspecting-errors
Signed-off-by: David Calavera <david.calavera@gmail.com>
This is done by moving the following types to api/types/config.go:
- ContainersConfig
- ContainerAttachWithLogsConfig
- ContainerWsAttachWithLogsConfig
- ContainerLogsConfig
- ContainerStatsConfig
Remove dependency on "version" package from types.ContainerStatsConfig.
Decouple the "container" router from the "daemon/exec" implementation.
* This is done by making daemon.ContainerExecInspect() return an interface{}
value. The same trick is already used by daemon.ContainerInspect().
Improve documentation for router packages.
Extract localRoute and router into separate files.
Move local.router to image.imageRouter.
Changes:
- Move local/image.go to image/image_routes.go.
- Move local/local.go to image/image.go
- Rename router to imageRouter.
- Simplify imports for image/image.go (remove alias for router package).
Merge router/local package into router package.
Decouple the "image" router from the actual daemon implementation.
Add Daemon.GetNetworkByID and Daemon.GetNetworkByName.
Decouple the "network" router from the actual daemon implementation.
This is done by replacing the daemon.NetworkByName constant with
an explicit GetNetworkByName method.
Remove the unused Daemon.GetNetwork method and the associated constants NetworkByID and NetworkByName.
Signed-off-by: Lukas Waslowski <cr7pt0gr4ph7@gmail.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
So other packages don't need to import the daemon package when they
want to use this struct.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
- refactor to make it easier to split the api in the future
- additional tests for non existent container case
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
Although having a request ID available throughout the codebase is very
valuable, the impact of requiring a Context as an argument to every
function in the codepath of an API request, is too significant and was
not properly understood at the time of the review.
Furthermore, mixing API-layer code with non-API-layer code makes the
latter usable only by API-layer code (one that has a notion of Context).
This reverts commit de41640435, reversing
changes made to 7daeecd42d.
Signed-off-by: Tibor Vass <tibor@docker.com>
Conflicts:
api/server/container.go
builder/internals.go
daemon/container_unix.go
daemon/create.go
This PR adds a "request ID" to each event generated, the 'docker events'
stream now looks like this:
```
2015-09-10T15:02:50.000000000-07:00 [reqid: c01e3534ddca] de7c5d4ca927253cf4e978ee9c4545161e406e9b5a14617efb52c658b249174a: (from ubuntu) create
```
Note the `[reqID: c01e3534ddca]` part, that's new.
Each HTTP request will generate its own unique ID. So, if you do a
`docker build` you'll see a series of events all with the same reqID.
This allow for log processing tools to determine which events are all related
to the same http request.
I didn't propigate the context to all possible funcs in the daemon,
I decided to just do the ones that needed it in order to get the reqID
into the events. I'd like to have people review this direction first, and
if we're ok with it then I'll make sure we're consistent about when
we pass around the context - IOW, make sure that all funcs at the same level
have a context passed in even if they don't call the log funcs - this will
ensure we're consistent w/o passing it around for all calls unnecessarily.
ping @icecrime @calavera @crosbymichael
Signed-off-by: Doug Davis <dug@us.ibm.com>
If a logdriver doesn't register a callback function to validate log
options, it won't be usable. Fix the journald driver by adding a dummy
validator.
Teach the client and the daemon's "logs" logic that the server can also
supply "logs" data via the "journald" driver. Update documentation and
tests that depend on error messages.
Add support for reading log data from the systemd journal to the
journald log driver. The internal logic uses a goroutine to scan the
journal for matching entries after any specified cutoff time, formats
the messages from those entries as JSONLog messages, and stuffs the
results down a pipe whose reading end we hand back to the caller.
If we are missing any of the 'linux', 'cgo', or 'journald' build tags,
however, we don't implement a reader, so the 'logs' endpoint will still
return an error.
Make the necessary changes to the build setup to ensure that support for
reading container logs from the systemd journal is built.
Rename the Jmap member of the journald logdriver's struct to "vars" to
make it non-public, and to make it easier to tell that it's just there
to hold additional variable values that we want journald to record along
with log data that we're sending to it.
In the client, don't assume that we know which logdrivers the server
implements, and remove the check that looks at the server. It's
redundant because the server already knows, and the check also makes
using older clients with newer servers (which may have new logdrivers in
them) unnecessarily hard.
When we try to "logs" and have to report that the container's logdriver
doesn't support reading, send the error message through the
might-be-a-multiplexer so that clients which are expecting multiplexed
data will be able to properly display the error, instead of tripping
over the data and printing a less helpful "Unrecognized input header"
error.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com> (github: nalind)
- some method names were changed to have a 'Locking' suffix, as the
downcased versions already existed, and the existing functions simply
had locks around the already downcased version.
- deleting unused functions
- package comment
- magic numbers replaced by golang constants
- comments all over
Signed-off-by: Morgan Bauer <mbauer@us.ibm.com>
