Remove forked reference package. Use normalized named values
everywhere and familiar functions to convert back to familiar
strings for UX and storage compatibility.
Enforce that the source repository in the distribution metadata
is always a normalized string, ignore invalid values which are not.
Update distribution tests to use normalized values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
As noted by #30083, the new strict checking of mediatypes misses some
cases where earlier bugs caused nonstandard mediatypes to be stored in
manifests. Two of the known cases are text/html and application/json,
which were returned by certain registries and stored by earlier versions
of Docker. Add special cases for text/html and application/json.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Move configurations into a single file.
Abstract download manager in pull config.
Add supports for schema2 only and schema2 type checking.
Add interface for providing push layers.
Abstract image store to generically handle configurations.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Updates the v1 search endpoint to also support v2 auth when an identity token is given.
Only search v1 endpoint is supported since there is not v2 search currently defined to replace it.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Use sockets.DialerFromEnvironment, as is done in other places,
to transparently support SOCKS proxy config from ALL_PROXY
environment variable.
Requires the *engine* have the ALL_PROXY env var set, which
doesn't seem ideal. Maybe it should be a CLI option somehow?
Only tested with push and a v2 registry so far. I'm happy to look
further into testing more broadly, but I wanted to get feedback on
the general idea first.
Signed-off-by: Brett Higgins <brhiggins@arbor.net>
This adds support for the passthrough on build, push, login, and search.
Revamp the integration test to cover these cases and make it more
robust.
Use backticks instead of quoted strings for backslash-heavy string
contstands.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Changes how the Engine interacts with Registry servers on image pull.
Previously, Engine sent a User-Agent string to the Registry server
that included only the Engine's version information. This commit
appends to that string the fields from the User-Agent sent by the
client (e.g., Compose) of the Engine. This allows Registry server
operators to understand what tools are actually generating pulls on
their registries.
Signed-off-by: Mike Goelzer <mgoelzer@docker.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
With the --insecure-registry daemon option (or talking to a registry on
a local IP), the daemon will first try TLS, and then try plaintext if
something goes wrong with the push or pull. It doesn't make sense to try
plaintext if a HTTP request went through while using TLS. This commit
changes the logic to keep track of host/port combinations where a TLS
attempt managed to do at least one HTTP request (whether the response
code indicated success or not). If the host/port responded to a HTTP
using TLS, we won't try to make plaintext HTTP requests to it.
This will result in better error messages, which sometimes ended up
showing the result of the plaintext attempt, like this:
Error response from daemon: Get
http://myregistrydomain.com:5000/v2/: malformed HTTP response
"\x15\x03\x01\x00\x02\x02"
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Several improvements to error handling:
- Introduce ImageConfigPullError type, wrapping errors related to
downloading the image configuration blob in schema2. This allows for a
more descriptive error message to be seen by the end user.
- Change some logrus.Debugf calls that display errors to logrus.Errorf.
Add log lines in the push/pull fallback cases to make sure the errors
leading to the fallback are shown.
- Move error-related types and functions which are only used by the
distribution package out of the registry package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This reverts commit 84b2162c1a.
The intent of this commit was to set an idle timeout on a HTTP
connection. If a read took more than 60 seconds to complete, or a write
took more than 60 seconds to complete, the connection would be
considered dead.
This doesn't work properly, because the HTTP internals apparently read
from the connection concurrently while writing. An upload that doesn't
complete in 60 seconds leads to a timeout.
Fixes#19967
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Otherwise, some operations can get stuck indefinitely when the remote
side is unresponsive.
Fixes#12823
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There was already a check that prevented protocol-level fallback in this
situation, but retries within a specific protocol will still happen.
This makes it take a long time for the pull to finally error out.
This fixes slowness in TestDaemonNoSpaceleftOnDeviceError, which used to
take a long time due to the backoff between retry attempts:
PASS: docker_cli_daemon_test.go:1868: DockerDaemonSuite.TestDaemonNoSpaceleftOnDeviceError 5.882s
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When authorization errors are returned by the token process the error will be wrapped in url.Error.
In order to check the underlying error for retry this error message should be unwrapped.
Unwrapping this error allows failure to push due to an unauthorized response to keep from retrying, possibly resulting in later 429 responses.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This change allows API clients to retrieve an authentication token from
a registry, and then pass that token directly to the API.
Example usage:
REPO_USER=dhiltgen
read -s PASSWORD
REPO=privateorg/repo
AUTH_URL=https://auth.docker.io/token
TOKEN=$(curl -s -u "${REPO_USER}:${PASSWORD}" "${AUTH_URL}?scope=repository:${REPO}:pull&service=registry.docker.io" |
jq -r ".token")
HEADER=$(echo "{\"registrytoken\":\"${TOKEN}\"}"|base64 -w 0 )
curl -s -D - -H "X-Registry-Auth: ${HEADER}" -X POST "http://localhost:2376/images/create?fromImage=${REPO}"
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
