As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
This fix fixes#23459.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
If we attach to a running container and stream is closed afterwards, we
can never be sure if the container is stopped or detached. Adding a new
type of `detach` event can explicitly notify client that container is
detached, so client will know that there's no need to wait for its exit
code and it can move forward to next step now.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This PR adds support for user-defined health-check probes for Docker
containers. It adds a `HEALTHCHECK` instruction to the Dockerfile syntax plus
some corresponding "docker run" options. It can be used with a restart policy
to automatically restart a container if the check fails.
The `HEALTHCHECK` instruction has two forms:
* `HEALTHCHECK [OPTIONS] CMD command` (check container health by running a command inside the container)
* `HEALTHCHECK NONE` (disable any healthcheck inherited from the base image)
The `HEALTHCHECK` instruction tells Docker how to test a container to check that
it is still working. This can detect cases such as a web server that is stuck in
an infinite loop and unable to handle new connections, even though the server
process is still running.
When a container has a healthcheck specified, it has a _health status_ in
addition to its normal status. This status is initially `starting`. Whenever a
health check passes, it becomes `healthy` (whatever state it was previously in).
After a certain number of consecutive failures, it becomes `unhealthy`.
The options that can appear before `CMD` are:
* `--interval=DURATION` (default: `30s`)
* `--timeout=DURATION` (default: `30s`)
* `--retries=N` (default: `1`)
The health check will first run **interval** seconds after the container is
started, and then again **interval** seconds after each previous check completes.
If a single run of the check takes longer than **timeout** seconds then the check
is considered to have failed.
It takes **retries** consecutive failures of the health check for the container
to be considered `unhealthy`.
There can only be one `HEALTHCHECK` instruction in a Dockerfile. If you list
more than one then only the last `HEALTHCHECK` will take effect.
The command after the `CMD` keyword can be either a shell command (e.g. `HEALTHCHECK
CMD /bin/check-running`) or an _exec_ array (as with other Dockerfile commands;
see e.g. `ENTRYPOINT` for details).
The command's exit status indicates the health status of the container.
The possible values are:
- 0: success - the container is healthy and ready for use
- 1: unhealthy - the container is not working correctly
- 2: starting - the container is not ready for use yet, but is working correctly
If the probe returns 2 ("starting") when the container has already moved out of the
"starting" state then it is treated as "unhealthy" instead.
For example, to check every five minutes or so that a web-server is able to
serve the site's main page within three seconds:
HEALTHCHECK --interval=5m --timeout=3s \
CMD curl -f http://localhost/ || exit 1
To help debug failing probes, any output text (UTF-8 encoded) that the command writes
on stdout or stderr will be stored in the health status and can be queried with
`docker inspect`. Such output should be kept short (only the first 4096 bytes
are stored currently).
When the health status of a container changes, a `health_status` event is
generated with the new status. The health status is also displayed in the
`docker ps` output.
Signed-off-by: Thomas Leonard <thomas.leonard@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
SELinux labeling should be disabled when using --privileged mode
/etc/hosts, /etc/resolv.conf, /etc/hostname should not be relabeled if they
are volume mounted into the container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Currently, using a custom detach key with an invalid sequence, eats a
part of the sequence, making it weird and difficult to enter some key
sequence.
This fixes by keeping the input read when trying to see if it's the key
sequence or not, and "writing" then is the key sequence is not the right
one, preserving the initial input.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Rework memoryStore so that filters and apply run
on a cloned list of containers after the lock has
been released. This avoids possible deadlocks when
these filter/apply callbacks take locks for a
container.
Fixes#22732
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This fix tries to address the issue raised in #22358 where syslog's
message tag always starts with `docker/` and can not be removed
by changing the log tag templates.
The issue is that syslog driver hardcodes `path.Base(os.Args[0])`
as the prefix, which is the binary file name of the daemon (`dockerd`).
This could be an issue for certain situations (e.g., #22358) where
user may prefer not to have a dedicated prefix in syslog messages.
There is no way to override this behavior in the current verison of
the docker.
This fix tries to address this issue without making changes in the
default behavior of the syslog driver. An additional
`{{.DaemonName}}` has been introduced in the syslog tag. This is
assigned as the `docker` when daemon starts. The default log tag
template has also been changed from
`path.Base(os.Args[0]) + "/{{.ID}}"` to `{{.DaemonName}}/{{.ID}}`.
Therefore, there is no behavior changes when log-tag is not provided.
In order to be consistent, the default log tag for fluentd has been
changed from `docker.{{.ID}}` to `{{DaemonName}}.{{.ID}}` as well.
The documentation for log-tag has been updated to reflect this change.
Additional test cases have been added to cover changes in this fix.
This fix fixes#22358.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
We need to have labels applied even if a container is running in privileged
mode. On an tightly locked down SELinux system, this will cause running
without labels will cause SELinux to block privileged mode containers.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This generates an ID string for calls to Mount/Unmount, allowing drivers
to differentiate between two callers of `Mount` and `Unmount`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Remove function `WaitRunning` because it's actually not necessary, also
remove wait channel for state "running" to avoid mixed use of the state
wait channel.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Restore the 1.10 logic that will reset the restart manager's timeout or
backoff delay if a container executes longer than 10s reguardless of
exit status or policy.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Currently if you restart docker daemon, all the containers with restart
policy `on-failure` regardless of its `RestartCount` will be started,
this will make daemon cost more extra time for restart.
This commit will stop these containers to do unnecessary start on
daemon's restart.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This allows a user to specify explicitly to enable
automatic copying of data from the container path to the volume path.
This does not change the default behavior of automatically copying, but
does allow a user to disable it at runtime.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Signed-off-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Darren Stahl <darst@microsoft.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This allows users to provide a FQDN as hostname or to use distinct hostname and
domainname parts. Depends on https://github.com/docker/libnetwork/pull/950
Signed-off-by: Tim Hockin <thockin@google.com>
