Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Use resolving to repo info as the split point between the
legitimate reference package and forked reference package.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Updates the v1 search endpoint to also support v2 auth when an identity token is given.
Only search v1 endpoint is supported since there is not v2 search currently defined to replace it.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
This fix tries to address the issue raised in #23055.
Currently `docker search` result caps at 25 and there is
no way to allow getting more results (if exist).
This fix adds the flag `--limit` so that it is possible
to return more results from the `docker search`.
Related documentation has been updated.
Additional tests have been added to cover the changes.
This fix fixes#23055.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
… and refactor a little bit some daemon on the way.
- Move `SearchRegistryForImages` to a new file (`daemon/search.go`) as
`daemon.go` is getting pretty big.
- `registry.Service` is now an interface (allowing us to decouple it a
little bit and thus unit test easily).
- Add some unit test for `SearchRegistryForImages`.
- Use UniqueExactMatch for search filters
- And use empty restore id for now in client.ContainerStart.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the issue in #22244 where the remote
API `/auth` will not set the default value of `serveraddress`
if not provided. This behavior happens after only in 1.11.0
and is a regression as in 1.10.3 `serveraddress` will be assigned
with `IndexServer` if no value is provided.
The default value `IndexServer` is assigned to `serveraddress` if
no value provided in this fix.
An integration test `TestAuthApi` has been added to cover this change
This fix fixes#22244.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Use token handler options for initialization.
Update auth endpoint to set identity token in response.
Update credential store to match distribution interface changes.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Search terms shouldn't be restricted to only full valid repository
names. It should be perfectly valid to search using a part of a name,
even if it ends with a period, dash or underscore.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This patch splits LookupEndpoints into LookupPullEndpoints and
LookupPushEndpoints so that mirrors added with --registry-mirror are
skipped in the list returned by LookupPushEndpoints.
Fixes https://github.com/docker/distribution/issues/823
Signed-off-by: Tibor Vass <tibor@docker.com>
Currently login and search do not load per registry certificates.
This is a regression caused by the last refactor since this was recently fixed.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
If a registry mirror is using TLS, ensure that certs for it
are picked up from /etc/docker/certs.d
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
This patch removes the need for requestFactories and decorators
by implementing http.RoundTripper transports instead.
It refactors some challenging-to-read code.
NewSession now takes an *http.Client that can already have a
custom Transport, it will add its own auth transport by wrapping
it.
The idea is that callers of http.Client should not bother
setting custom headers for every handler but instead it should
be transparent to the callers of a same context.
This patch is needed for future refactorings of registry,
namely refactoring of the v1 client code.
Signed-off-by: Tibor Vass <tibor@docker.com>
This makes `registry.Service` a first class type and does not use jobs
to interact with this type.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
summary of changes:
registry/auth.go
- More logging around the login functions
- split Login() out to handle different code paths for v1 (unchanged logic)
and v2 (does not currently do account creation)
- handling for either basic or token based login attempts
registry/authchallenge.go
- New File
- credit to Brian Bland <brian.bland@docker.com> (github: BrianBland)
- handles parsing of WWW-Authenticate response headers
registry/endpoint.go
- EVEN MOAR LOGGING
- Many edits throught to make the coad less dense. Sparse code is more
readable code.
- slit Ping() out to handle different code paths for v1 (unchanged logic)
and v2.
- Updated Endpoint struct type to include an entry for authorization
challenges discovered during ping of a v2 registry.
- If registry endpoint version is unknown, v2 code path is first attempted,
then fallback to v1 upon failure.
registry/service.go
- STILL MOAR LOGGING
- simplified the logic around starting the 'auth' job.
registry/session.go
- updated use of a registry.Endpoint struct field.
registry/token.go
- New File
- Handles getting token from the parameters of a token auth challenge.
- Modified from function written by Brian Bland (see above credit).
registry/types.go
- Removed 'DefaultAPIVersion' in lieu of 'APIVersionUnknown = 0'`
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
