Similar to the (now removed) `apparmor` build tag, this build-time toggle existed for users who needed to build without the `libseccomp` library. That's no longer necessary, and given the importance of seccomp to the overall default security profile of Docker containers, it makes sense that any binary built for Linux should support (and use by default) seccomp if the underlying host does.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The libtrust trust-key is only used for pushing legacy image manifests;
pushing these images has been deprecated, and we only need to be able
to push them in our CI.
This patch disables generating the trust-key (and related paths) unless
the DOCKER_ALLOW_SCHEMA1_PUSH_DONOTUSE env-var is set (which we do in
our CI).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit replaces `os.Setenv` with `t.Setenv` in tests. The
environment variable is automatically restored to its original value
when the test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.Setenv
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Some packages were using `logrus.Fatal()` in init functions (which logs the error,
and (by default) calls `os.Exit(1)` after logging).
Given that logrus formatting and outputs have not yet been configured during the
initialization stage, it does not provide much benefits over a plain `panic()`.
This patch replaces some instances of `logrus.Fatal()` with `panic()`, which has
the added benefits of not introducing logrus as a dependency in some of these
packages, and also produces a stacktrace, which could help locating the problem
in the unlikely event an `init()` fails.
Before this change, an error would look like:
$ dockerd
FATA[0000] something bad happened
After this change, the same error looks like:
$ dockerd
panic: something bad happened
goroutine 1 [running]:
github.com/docker/docker/daemon/logger/awslogs.init.0()
/go/src/github.com/docker/docker/daemon/logger/awslogs/cloudwatchlogs.go:128 +0x89
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a ReadJSON() utility to help reduce some code-duplication,
and to make sure we handle JSON requests consistently (e.g. always
check for the content-type).
Differences compared to current handling:
- prevent possible panic if request.Body is nil ("should never happen")
- always require Content-Type to be "application/json"
- be stricter about additional content after JSON (previously ignored)
- but, allow the body to be empty (an empty body is not invalid);
update TestContainerInvalidJSON accordingly, which was testing the
wrong expectation.
- close body after reading (some code did this)
We should consider to add a "max body size" on this function, similar to
7b9275c0da/api/server/middleware/debug.go (L27-L40)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
pkg/urlutil (despite its poorly chosen name) is not really intended as a generic
utility to handle URLs, and should only be used by the builder to handle (remote)
build contexts.
This patch:
- removes a redundant use of urlutil.IsTransportURL(); instead adding some code
to check if the given scheme (protocol) is supported.
- define a `defaultPort` const for the default port.
- use `net.JoinHostPort()` instead of string concatenating, to account for possible
issues with IPv6 addresses.
- renames a variable that collided with an imported package.
- improves test coverage, and moves an integration test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The test was dependent on its container being _first_ in the response,
but anywhere on the line should be fine.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
The wrapResponseError() utility converted some specific errors, but in
doing so, could hide the actual error message returned by the daemon.
In addition, starting with 38e6d474af,
HTTP status codes were already mapped to their corresponding errdefs
types on the client-side, making this conversion redundant.
This patch removes the wrapResponseError() utility; it's worth noting
that some error-messages will change slightly (as they now return the
error as returned by the daemon), but may cointain more details as
before, and in some cases prevents hiding the actual error.
Before this change:
docker container rm nosuchcontainer
Error: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error: No such container:path: mycontainer:/no/such/path
docker container cp ./Dockerfile mycontainer:/no/such/path
Error: No such container:path: mycontainer:/no/such
docker image rm nosuchimage
Error: No such image: nosuchimage
docker network rm nosuchnetwork
Error: No such network: nosuchnetwork
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
docker plugin rm nosuchplugin
Error: No such plugin: nosuchplugin
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error: No such service: nosuchservice
docker node rm nosuchnode
Error: No such node: nosuchnode
docker config rm nosuschconfig
Error: No such config: nosuschconfig
docker secret rm nosuchsecret
Error: No such secret: nosuchsecret
After this change:
docker container rm nosuchcontainer
Error response from daemon: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error response from daemon: Could not find the file /no/such/path in container mycontainer
docker container cp ./Dockerfile mycontainer:/no/such/path
Error response from daemon: Could not find the file /no/such in container mycontainer
docker image rm nosuchimage
Error response from daemon: No such image: nosuchimage:latest
docker network rm nosuchnetwork
Error response from daemon: network nosuchnetwork not found
docker volume rm nosuchvolume
Error response from daemon: get nosuchvolume: no such volume
docker plugin rm nosuchplugin
Error response from daemon: plugin "nosuchplugin" not found
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error response from daemon: service nosuchservice not found
docker node rm nosuchnode
Error response from daemon: node nosuchnode not found
docker config rm nosuchconfig
Error response from daemon: config nosuchconfig not found
docker secret rm nosuchsecret
Error response from daemon: secret nosuchsecret not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move the default to the service itself, and produce the correct status code
if an invalid limit was specified. The default is currently set both on the
cli and on the daemon side, and it should be only set on one of them.
There is a slight change in behavior; previously, searching with `--limit=0`
would produce an error, but with this change, it's considered the equivalent
of "no limit set" (and using the default).
We could keep the old behavior by passing a pointer (`nil` means "not set"),
but I left that for a follow-up exercise (we may want to pass an actual
config instead of separate arguments, as well as some other things that need
cleaning up).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use sub-tests so that the iterations can run in parallel (instead of
sequential), and to make failures show up for the iteration that they're
part of.
Note that changing to subtests means that we'll always run 3 iterations of
the test, and no longer fail early (but the test still fails if any of
those iterations fails.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test has become quite flaky on Windows / Windows with Containerd.
Looking at the test, I noticed that it's running a test three times (according
to the comment "as it failed ~ 50% of the time"). However;
- it uses the `--rm` option to clean up the container after it terminated
- it uses a fixed name for the containers that are started
I had a quick look at the issue that it was created for, and neither of those
options were mentioned in the reported bug (so are just part of the test setup).
I think the test was written when the `--rm` option was still client-side, in which
case the cli would not terminate until it removed the container (making the
remove synchronous). Current versions of docker have moved the `--rm` to the
daemon side, and (if I'm not mistaken) performed asynchronous, and therefore could
potentially cause a conflicting name.
This patch:
- removes the fixed name (the test doesn't require the container to have a
specific name, so we can just use a random name)
- adds logs to capture the stderr and stdout output of the run (so that we're
able to capture failure messages).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I had to check what the actual size was, so added it to the const's documentation.
While at it, also made use of it in a test, so that we're testing against the expected
value, and changed one alias to be consistent with other places where we alias this
import.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Windows Server 2016 (RS1) reached end of support, and Docker Desktop requires
Windows 10 V19H2 (version 1909, build 18363) as a minimum.
This patch makes Windows Server RS5 / ltsc2019 (build 17763) the minimum version
to run the daemon, and removes some hacks for older versions of Windows.
There is one check remaining that checks for Windows RS3 for a workaround
on older versions, but recent changes in Windows seemed to have regressed
on the same issue, so I kept that code for now to check if we may need that
workaround (again);
085c6a98d5/daemon/graphdriver/windows/windows.go (L319-L341)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think the original intent here was to make passing t optional (62a856e912),
but it looks like that's not done anywhere, so let's remove it.
integration-cli/docker_utils_test.go:81:2: SA5011: possible nil pointer dereference (staticcheck)
c.Helper()
^
integration-cli/docker_utils_test.go:84:5: SA5011(related information): this check suggests that the pointer can be nil (staticcheck)
if c != nil {
^
integration-cli/docker_utils_test.go:106:2: SA5011: possible nil pointer dereference (staticcheck)
c.Helper()
^
integration-cli/docker_utils_test.go:108:5: SA5011(related information): this check suggests that the pointer can be nil (staticcheck)
if c != nil {
^
integration-cli/docker_utils_test.go:116:2: SA5011: possible nil pointer dereference (staticcheck)
c.Helper()
^
integration-cli/docker_utils_test.go:118:5: SA5011(related information): this check suggests that the pointer can be nil (staticcheck)
if c != nil {
^
integration-cli/docker_utils_test.go:126:2: SA5011: possible nil pointer dereference (staticcheck)
c.Helper()
^
integration-cli/docker_utils_test.go:128:5: SA5011(related information): this check suggests that the pointer can be nil (staticcheck)
if c != nil {
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use unique names to prevent tests from interfering, using a shorter
name, as there's a maximum length for these.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A number of tests in the TestDockerDaemonSuite create a custom bridge as part
of the test. In some cases, an existing `docker0` bridge could interfere with
those tests. For example, the `TestDaemonICCLinkExpose` and `TestDaemonICCPing`
verify that no "icc" communication is possible, and for this create a new
bridge with a custom IP-range.
However, depending on which tests ran before the test, a default `docker0` bridge
may exist (e.g., if the`TestDefaultGatewayIPv4Implicit`) with the same IP-range,
in which iptables rules may have been set up that allow communication, and thus
make the "icc" tests fail.
This patch removes the `docker0` interface at the start of tests that create
their own bridge to prevent it from interfering.
Note that alternatively, we could update those tests to use an IP-range that's
less likely to overlap, but this may be more brittle (but could still be done
in addition to this change as a follow-up).
To verify these changes;
make DOCKER_GRAPHDRIVER=vfs TEST_SKIP_INTEGRATION=1 TESTFLAGS='-test.run TestDockerDaemonSuite/TestDaemon(DefaultGatewayIPv4|ICC)' test-integration-cli
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The appropriate/nc image was last built over 6 years ago, and uses the
deprecated v2 schema 1 format.
https://github.com/appropriate/docker-nc/tree/master/latest
The image is just a plain "apk install" of netbsd-netcat, but was added
in 1c4286bcff, because at the time the
busybox nc had some bugs.
These appear to be resolved, so we can use the busybox nc, from the
frozen images.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Pushing manifest v2, schema 1 images has been deprecated in commit
6302dbbf46 (docker 20.10). It's still used in
some tests to provision a legacy registry to test _pulling_ legacy images
(which is still "supported"), but we should no longer have to validate pushing
for other scenarios.
This patch removes the schema 1 push tests, and inlines the code that was
extracted in non-exported functions (for them to be shared between schema 2 and
schema 1 tests).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
