The current GetAll handles both V2 and legacy plugins. Also due to the
nature of V1 plugins, it also loads them. This causes problems when
loading is not required. Hence adding an independent API that will
return only the plugins that are loaded using v2 mangaed plugins.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
The current validation only checked for the
number of elements in the volume-spec, however,
did not validate if the elements were empty.
Because of this, an empty volume-spec (""),
or volume spec only containing separators ("::")
would not be invalidated.
This adds a simple check for empty elements in
the volume-spec, and returns an error if
the spec is invalid.
A unit-test is also added to verify the behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the `convertVolumeToMount()` function did not take
anonymous volumes into account when converting
volume specifications to bind-mounts.
this resulted in the conversion to try to
look up an empty "source" volume, which
lead to an error;
undefined volume:
this patch distinguishes "anonymous"
volumes from bind-mounts and named-volumes,
and skips further processing if no source
is defined (i.e. the volume is "anonymous").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 3d86b0c79b)
Move configurations into a single file.
Abstract download manager in pull config.
Add supports for schema2 only and schema2 type checking.
Add interface for providing push layers.
Abstract image store to generically handle configurations.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 3c7676a057)
Manifest builder allows setting the configuration type
for the manifest being build. Additionally the default
type has been renamed to reflect it is an image type.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
(cherry picked from commit 61ac7c4bf8)
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
(cherry picked from commit 8cb2229cd1)
This fix is a follow up for comment:
https://github.com/docker/docker/pull/29186/files#r91277345
While #29186 addresses the issue of `docker inspect <unknown object>`
on Windows, it actually makes `docker plugin inspect <unknown object>`
out `object not found` on Windows as well. This is actually misleading
as plugin is not supported on Windows.
This fix reverted the change in #29186 while at the same time,
checks `not supported` in `docker inspect <unknown object>` so that
- `docker plugin inspect <unknown object>` returns `not supported` on Windows
- `docker inspect <unknown object>` returns `not found` on Windows
This fix is related to #29186 and #29185.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 0b3c10ac4d)
This fix is a follow up to the comment:
https://github.com/docker/docker/pull/28717#discussion_r90040589
Currently, the collision checking is done at the last step `Add()` of
plugin creation. However, at this stage the context such as plugin
directories have already been creation. In case of name collision,
rollback is needed which could be expensive.
This fix performs the check at the beginning of CreateFromContext using
GetByName. In this way, collision fails fast and no context creation
or rollback is needed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 52405a9b58)
Previously, it was comparing against the driver name passed in by the
caller. This could lead to subtle issues when using plugins, like
"plugin" vs. "plugin:latest".
Also, remove "conflict:" prefix to improve the error message.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit a854cf262336e5625ec06e8e12e8ebc1500ce656)
Ensures all known volumes (known b/c they are persisted to disk) have
their volume drivers refcounted properly.
In testing this, I found an issue with `--live-restore` (required since
currently the provided volume plugin doesn't keep state on restart)
where restorted plugins did not have a plugin client loaded causing a
panic when trying to use the plugin.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 6ef1060cd0)
Signed-off-by: Victor Vieux <vieux@docker.com>
Previously, it doesn't allow creating such a network:
e.g.
$ docker network inspect -f '{{.Id}}' ingress
84xh9knigj6zyt00u31e26nj3
$ docker network create 84
Error response from daemon: network with name 84 already exists
Fix#27866
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
(cherry picked from commit edfbc3b876)
Signed-off-by: Victor Vieux <vieux@docker.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit f89eee5d9d)
Signed-off-by: Victor Vieux <vieux@docker.com>
Also enables `PropagatedMount` for graphdrivers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
(cherry picked from commit 500210475f)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised in 24352. Previously,
when `docker swarm update` has no flags, the output is
```
Swarm updated.
```
even though nothing was updated. This could be misleading for
users.
This fix tries to address the issue by adding a `PreRunE` function
in the command so that in case no flag is provided (`cmd.Flags().NFlag() == 0`),
the usage will be outputed instead.
An integration has been added to cover the changes.
This fix fixes 24352.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 5aa5a1cb00)
Signed-off-by: Victor Vieux <vieux@docker.com>
Fixes a case where removing the plugin from disk would
fail silently. Also moves pluginStore remove after we
remove from disk, so 'docker plugin ls' doesn't isn't
empty in case it errors out.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
(cherry picked from commit fb11164c4f)
Signed-off-by: Victor Vieux <vieux@docker.com>
This fix tries to address the issue raised in 29342 where
`docker exec -u` after docker daemon restart returns an error:
```
unable to find user test: no matching entries in passwd file
```
The reason was that `container.BaseFS` is not present after restart.
This fix adds the `daemon.Mount` during the restore to bring up the
`container.BaseFS`.
An integration test has been added to cover the changes.
This fix fixes 29342.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
(cherry picked from commit 7feb2a17e4)
Signed-off-by: Victor Vieux <vieux@docker.com>
Implement notary-based digest lookup in the client when
DOCKER_CONTENT_TRUST=1.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit d4d6f8c0d0)
Split these into cli/trust so that other commands can make use of them.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit 4b8c79f25e)
This removes some very old vestigial code that really should have been
removed during the content addressability transition. It implements
something called "reference" but it behaves differently from the actual
reference package. This was only used by client-side content trust code,
and is relatively easy to extricate.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
(cherry picked from commit d91ed88365)
