We document that an macvlan network with no parent interface is
equivalent to a '--internal' network. But, in this case, an macvlan
network was still configured with a gateway. So, DNS proxying would
be enabled in the internal resolver (and, if the host's resolver
was on a localhost address, requests to external resolvers from the
host's network namespace would succeed).
This change disables configuration of a gateway for a macvlan Endpoint
if no parent interface is specified.
(Note if a parent interface with no external network is supplied as
'-o parent=<dummy>', the gateway will still be set up. Documentation
will need to be updated to note that '--internal' should be used to
prevent DNS request forwarding in this case.)
Signed-off-by: Rob Murray <rob.murray@docker.com>
The internal DNS resolver should only forward requests to external
resolvers if the libnetwork.Sandbox served by the resolver has external
network access (so, no forwarding for '--internal' networks).
The test for external network access was whether the Sandbox had an
Endpoint with a gateway configured.
However, an ipvlan-l3 networks with external network access does not
have a gateway, it has a default route bound to an interface.
Also, we document that an ipvlan network with no parent interface is
equivalent to a '--internal' network. But, in this case, an ipvlan-l2
network was configured with a gateway. So, DNS proxying would be enabled
in the internal resolver (and, if the host's resolver was on a localhost
address, requests to external resolvers from the host's network
namespace would succeed).
So, this change adjusts the test for enabling DNS proxying to include
a check for '--internal' (as a shortcut) and, for non-internal networks,
checks for a default route as well as a gateway. It also disables
configuration of a gateway or a default route for an ipvlan Endpoint if
no parent interface is specified.
(Note if a parent interface with no external network is supplied as
'-o parent=<dummy>', the gateway/default route will still be set up
and external DNS proxying will be enabled. The network must be
configured as '--internal' to prevent that from happening.)
Signed-off-by: Rob Murray <rob.murray@docker.com>
Partially reverts 0046b16 "daemon: set libnetwork sandbox key w/o OCI hook"
Running SetKey to store the OCI Sandbox key after task creation, rather
than from the OCI prestart hook, meant it happened after sysctl settings
were applied by the runtime - which was the intention, we wanted to
complete Sandbox configuration after IPv6 had been disabled by a sysctl
if that was going to happen.
But, it meant '--sysctl' options for a specfic network interface caused
container task creation to fail, because the interface is only moved into
the network namespace during SetKey.
This change restores the SetKey prestart hook, and regenerates config
files that depend on the container's support for IPv6 after the task has
been created. It also adds a regression test that makes sure it's possible
to set an interface-specfic sysctl.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Commit 8921897e3b introduced the uses of `clear()`,
which requires go1.21, but Go is downgrading this file to go1.16 when used in
other projects (due to us not yet being a go module);
0.175 + xx-go build '-gcflags=' -ldflags '-X github.com/moby/buildkit/version.Version=b53a13e -X github.com/moby/buildkit/version.Revision=b53a13e4f5c8d7e82716615e0f23656893df89af -X github.com/moby/buildkit/version.Package=github.com/moby/buildkit -extldflags '"'"'-static'"'" -tags 'osusergo netgo static_build seccomp ' -o /usr/bin/buildkitd ./cmd/buildkitd
181.8 # github.com/docker/docker/libnetwork/internal/resolvconf
181.8 vendor/github.com/docker/docker/libnetwork/internal/resolvconf/resolvconf.go:509:2: clear requires go1.21 or later (-lang was set to go1.16; check go.mod)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit cbc2a71c2 makes `connect` syscall fail fast when a container is
only attached to an internal network. Thanks to that, if such a
container tries to resolve an "external" domain, the embedded resolver
returns an error immediately instead of waiting for a timeout.
This commit makes sure the embedded resolver doesn't even try to forward
to upstream servers.
Co-authored-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Rob Murray <rob.murray@docker.com>
Rather than error out if the host's resolv.conf has a bad ndots option,
just ignore it. Still validate ndots supplied via '--dns-option' and
treat failure as an error.
Signed-off-by: Rob Murray <rob.murray@docker.com>
When IPv6 is disabled in a container by, for example, using the --sysctl
option - an IPv6 address/gateway is still allocated. Don't attempt to
apply that config because doing so enables IPv6 on the interface.
Signed-off-by: Rob Murray <rob.murray@docker.com>
When configuring the internal DNS resolver - rather than keep IPv6
nameservers read from the host's resolv.conf in the container's
resolv.conf, treat them like IPv4 addresses and use them as upstream
resolvers.
For IPv6 nameservers, if there's a zone identifier in the address or
the container itself doesn't have IPv6 support, mark the upstream
addresses for use in the host's network namespace.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Apply command gotest.tools/v3/assert/cmd/gty-migrate-from-testify to the
cnmallocator package to be consistent with the assertion library used
elsewhere in moby.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Moby imports Swarmkit; Swarmkit no longer imports Moby. In order to
accomplish this feat, Swarmkit has introduced a new plugin.Getter
interface so it could stop importing our pkg/plugingetter package. This
new interface is not entirely compatible with our
plugingetter.PluginGetter interface, necessitating a thin adapter.
Swarmkit had to jettison the CNM network allocator to stop having to
import libnetwork as the cnmallocator package is deeply tied to
libnetwork. Move the CNM network allocator into libnetwork, where it
belongs. The package had a short an uninteresting Git history in the
Swarmkit repository so no effort was made to retain history.
Signed-off-by: Cory Snider <csnider@mirantis.com>
A common pattern in libnetwork is to delete an object using
`DeleteAtomic`, ie. to check the optimistic lock, but put in a retry
loop to refresh the data and the version index used by the optimistic
lock.
This commit introduces a new `Delete` method to delete without
checking the optimistic lock. It focuses only on the few places where
it's obvious the calling code doesn't rely on the side-effects of the
retry loop (ie. refreshing the object to be deleted).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
I noticed that this log didn't use structured logs;
[resolver] failed to query DNS server: 10.115.11.146:53, query: ;google.com.\tIN\t A" error="read udp 172.19.0.2:46361->10.115.11.146:53: i/o timeout
[resolver] failed to query DNS server: 10.44.139.225:53, query: ;google.com.\tIN\t A" error="read udp 172.19.0.2:53991->10.44.139.225:53: i/o timeout
But other logs did;
DEBU[2024-02-20T15:48:51.026704088Z] [resolver] forwarding query client-addr="udp:172.19.0.2:39661" dns-server="udp:192.168.65.7:53" question=";google.com.\tIN\t A"
DEBU[2024-02-20T15:48:51.028331088Z] [resolver] forwarding query client-addr="udp:172.19.0.2:35163" dns-server="udp:192.168.65.7:53" question=";google.com.\tIN\t AAAA"
DEBU[2024-02-20T15:48:51.057329755Z] [resolver] received AAAA record "2a00:1450:400e:801::200e" for "google.com." from udp:192.168.65.7
DEBU[2024-02-20T15:48:51.057666880Z] [resolver] received A record "142.251.36.14" for "google.com." from udp:192.168.65.7
As we're already constructing a logger with these fields, we may as well use it.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to release 25.0.0, the bridge in an internal network was assigned
an IP address - making the internal network accessible from the host,
giving containers on the network access to anything listening on the
bridge's address (or INADDR_ANY on the host).
This change restores that behaviour. It does not restore the default
route that was configured in the container, because packets sent outside
the internal network's subnet have always been dropped. So, a 'connect()'
to an address outside the subnet will still fail fast.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Replace regex matching/replacement and re-reading of generated files
with a simple parser, and struct to remember and manipulate the file
content.
Annotate the generated file with a header comment saying the file is
generated, but can be modified, and a trailing comment describing how
the file was generated and listing external nameservers.
Always start with the host's resolv.conf file, whether generating config
for host networking, or with/without an internal resolver - rather than
editing a file previously generated for a different use-case.
Resolves an issue where rewrites of the generated file resulted in
default IPv6 nameservers being unnecessarily added to the config.
Signed-off-by: Rob Murray <rob.murray@docker.com>
Since 964ab7158c, we explicitly set the bridge MTU if it was specified.
Unfortunately, kernel <v4.17 have a check preventing us to manually set
the MTU to anything greater than 1500 if no links is attached to the
bridge, which is how we do things -- create the bridge, set its MTU and
later on, attach veths to it.
Relevant kernel commit: 804b854d37
As we still have to support CentOS/RHEL 7 (and their old v3.10 kernels)
for a few more months, we need to ignore EINVAL if the MTU is > 1500
(but <= 65535).
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Previous commit made getDBhandle a one-liner returning a struct
member -- making it useless. Inline it.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This parameter was used to tell the boltdb kvstore not to open/close
the underlying boltdb db file before/after each get/put operation.
Since d21d0884ae, we've a single datastore instance shared by all
components that need it. That commit set `PersistConnection=true`.
We can now safely remove this param altogether, and remove all the
code that was opening and closing the db file before and after each
operation -- it's dead code!
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This test is non-representative of what we now do in libnetwork.
Since the ability of opening the same boltdb database multiple
times in parallel will be dropped in the next commit, just remove
this test.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Containers attached to an 'internal' bridge network are unable to
communicate when the host is running firewalld.
Non-internal bridges are added to a trusted 'docker' firewalld zone, but
internal bridges were not.
DOCKER-ISOLATION iptables rules are still configured for an internal
network, they block traffic to/from addresses outside the network's subnet.
Signed-off-by: Rob Murray <rob.murray@docker.com>
File paths can contain commas, particularly paths returned from
t.TempDir() in subtests which include commas in their names. There is
only one datastore provider and it only supports a single address, so
the only use of parsing the address is to break tests in mysterious
ways.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The bbolt library wants exclusive access to the boltdb file and uses
file locking to assure that is the case. The controller and each network
driver that needs persistent storage instantiates its own unique
datastore instance, backed by the same boltdb file. The boltdb kvstore
implementation works around multiple access to the same boltdb file by
aggressively closing the boltdb file between each transaction. This is
very inefficient. Have the controller pass its datastore instance into
the drivers and enable the PersistConnection option to disable closing
the boltdb between transactions.
Set data-dir in unit tests which instantiate libnetwork controllers so
they don't hang trying to lock the default boltdb database file.
Signed-off-by: Cory Snider <csnider@mirantis.com>
