This option was deprecated in 5a922dc162, which
is part of the v24.0.0 release, so we can remove it from master.
This patch;
- adds a check to ValidatePlatformConfig, and produces a fatal error
if oom-score-adjust is set
- removes the deprecated libcontainerd/supervisor.WithOOMScore
- removes the warning from docker info
With this patch:
dockerd --oom-score-adjust=-500 --validate
Flag --oom-score-adjust has been deprecated, and will be removed in the next release.
unable to configure the Docker daemon with file /etc/docker/daemon.json: merged configuration validation from file and command line flags failed: DEPRECATED: The "oom-score-adjust" config parameter and the dockerd "--oom-score-adjust" options have been removed.
And when using `daemon.json`:
dockerd --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json: merged configuration validation from file and command line flags failed: DEPRECATED: The "oom-score-adjust" config parameter and the dockerd "--oom-score-adjust" options have been removed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `oom-score-adjust` option was added in a894aec8d8,
to prevent the daemon from being OOM-killed before other processes. This
option was mostly added as a "convenience", as running the daemon as a
systemd unit was not yet common.
Having the daemon set its own limits is not best-practice, and something
better handled by the process-manager starting the daemon.
Commit cf7a5be0f2 fixed this option to allow
disabling it, and 2b8e68ef06 removed the default
score adjust.
This patch deprecates the option altogether, recommending users to set these
limits through the process manager used, such as the "OOMScoreAdjust" option
in systemd units.
With this patch:
dockerd --oom-score-adjust=-500 --validate
Flag --oom-score-adjust has been deprecated, and will be removed in the next release.
configuration OK
echo '{"oom-score-adjust":-500}' > /etc/docker/daemon.json
dockerd
INFO[2023-04-12T21:34:51.133389627Z] Starting up
INFO[2023-04-12T21:34:51.135607544Z] containerd not running, starting managed containerd
WARN[2023-04-12T21:34:51.135629086Z] DEPRECATED: The "oom-score-adjust" config parameter and the dockerd "--oom-score-adjust" option will be removed in the next release.
docker info
Client:
Context: default
Debug Mode: false
...
DEPRECATED: The "oom-score-adjust" config parameter and the dockerd "--oom-score-adjust" option will be removed in the next release
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The signatures of functions in containerd's errdefs packages are very
similar to those in our own, and it's easy to accidentally use the wrong
package.
This patch uses a consistent alias for all occurrences of this import.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Closing stdin of a container or exec (a.k.a.: task or process) has been
somewhat broken ever since support for ContainerD 1.0 was introduced
back in Docker v17.11: the error returned from the CloseIO() call was
effectively ignored due to it being assigned to a local variable which
shadowed the intended variable. Serendipitously, that oversight
prevented a data race. In my recent refactor of libcontainerd, I
corrected the variable shadowing issue and introduced the aforementioned
data race in the process.
Avoid deadlocking when closing stdin without swallowing errors or
introducing data races by calling CloseIO() synchronously if the process
handle is available, falling back to an asynchronous close-and-log
strategy otherwise. This solution is inelegant and complex, but looks to
be the best that could be done without changing the libcontainerd API.
Signed-off-by: Cory Snider <csnider@mirantis.com>
In preparation for containerd v1.7 which migrates off gogo/protobuf
and changes the protobuf Any type to one that's not supported by our
vendored version of typeurl.
This fixes a compile error on usages of `typeurl.UnmarshalAny` when
upgrading to containerd v1.7.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
`cp` variable is used later to populate the `info.Checkpoint` field
option used by Task creation.
Previous changes mistakenly changed assignment of the `cp` variable to
declaration of a new variable that's scoped only to the if block.
Restore the old assignment behavior.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Kubernetes only permits RuntimeClass values which are valid lowercase
RFC 1123 labels, which disallows the period character. This prevents
cri-dockerd from being able to support configuring alternative shimv2
runtimes for a pod as shimv2 runtime names must contain at least one
period character. Add support for configuring named shimv2 runtimes in
daemon.json so that runtime names can be aliased to
Kubernetes-compatible names.
Allow options to be set on shimv2 runtimes in daemon.json.
The names of the new daemon runtime config fields have been selected to
correspond with the equivalent field names in cri-containerd's
configuration so that users can more easily follow documentation from
the runtime vendor written for cri-containerd and apply it to
daemon.json.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The ID of the task is known at the time that the FIFOs need to be
created (it's passed into the IO-creator callback, and is also the same
as the container ID) so there is no need to hardcode it to "init". Name
the FIFOs after the task ID to be consistent with the FIFO names of
exec'ed processes. Delete the now-unused InitProcessName constant so it
can never again be used in place of a task/process ID.
Signed-off-by: Cory Snider <csnider@mirantis.com>
ContainerD unconditionally sets the ID of a task to its container's ID.
Emulate this behaviour in the libcontainerd local_windows implementation
so that the daemon can use ProcessID == ContainerID (in libcontainerd
terminology) to identify that an exit event is for the container's task
and not for another process (i.e. an exec) in the same container.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Deleting a containerd task whose status is Created fails with a
"precondition failed" error. This is because (aside from Windows)
a process is spawned when the task is created, and deleting the task
while the process is running would leak the process if it was allowed.
libcontainerd and the containerd plugin executor mistakenly try to clean
up from a failed start by deleting the created task, which will always
fail with the aforementined error. Change them to pass the
`WithProcessKill` delete option so the cleanup has a chance to succeed.
Signed-off-by: Cory Snider <csnider@mirantis.com>
On Linux, when (os/exec.Cmd).SysProcAttr.Pdeathsig is set, the signal
will be sent to the process when the OS thread on which cmd.Start() was
executed dies. The runtime terminates an OS thread when a goroutine
exits after being wired to the thread with runtime.LockOSThread(). If
other goroutines are allowed to be scheduled onto a thread which called
cmd.Start(), an unrelated goroutine could cause the thread to be
terminated and prematurely signal the command. See
https://github.com/golang/go/issues/27505 for more information.
Prevent started subprocesses with Pdeathsig from getting signaled
prematurely by wiring the starting goroutine to the OS thread until the
subprocess has exited. No other goroutines can be scheduled onto a
locked thread so it will remain alive until unlocked or the daemon
process exits.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The existing logic to handle container ID conflicts when attempting to
create a plugin container is not nearly as robust as the implementation
in daemon for user containers. Extract and refine the logic from daemon
and use it in the plugin executor.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The containerd client is very chatty at the best of times. Because the
libcontained API is stateless and references containers and processes by
string ID for every method call, the implementation is essentially
forced to use the containerd client in a way which amplifies the number
of redundant RPCs invoked to perform any operation. The libcontainerd
remote implementation has to reload the containerd container, task
and/or process metadata for nearly every operation. This in turn
amplifies the number of context switches between dockerd and containerd
to perform any container operation or handle a containerd event,
increasing the load on the system which could otherwise be allocated to
workloads.
Overhaul the libcontainerd interface to reduce the impedance mismatch
with the containerd client so that the containerd client can be used
more efficiently. Split the API out into container, task and process
interfaces which the consumer is expected to retain so that
libcontainerd can retain state---especially the analogous containerd
client objects---without having to manage any state-store inside the
libcontainerd client.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The OOMKilled flag on a container's state has historically behaved
rather unintuitively: it is updated on container exit to reflect whether
or not any process within the container has been OOM-killed during the
preceding run of the container. The OOMKilled flag would be set to true
when the container exits if any process within the container---including
execs---was OOM-killed at any time while the container was running,
whether or not the OOM-kill was the cause of the container exiting. The
flag is "sticky," persisting through the next start of the container;
only being cleared once the container exits without any processes having
been OOM-killed that run.
Alter the behavior of the OOMKilled flag such that it signals whether
any process in the container had been OOM-killed since the most recent
start of the container. Set the flag immediately upon any process being
OOM-killed, and clear it when the container transitions to the "running"
state.
There is an ulterior motive for this change. It reduces the amount of
state the libcontainerd client needs to keep track of and clean up on
container exit. It's one less place the client could leak memory if a
container was to be deleted without going through libcontainerd.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Change the log-level for messages about starting the managed containerd instance
to be the same as for the main API. And remove a redundant debug-log.
With this patch:
dockerd
INFO[2022-08-11T11:46:32.573299176Z] Starting up
INFO[2022-08-11T11:46:32.574304409Z] containerd not running, starting managed containerd
INFO[2022-08-11T11:46:32.575289181Z] started new containerd process address=/var/run/docker/containerd/containerd.sock module=libcontainerd pid=5370
cmd/dockerd: initContainerD(): clean-up some logs
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the `--log-level` flag overrides whatever is in the containerd configuration file;
f033f6ff85/cmd/containerd/command/main.go (L339-L352)
Given that we set that flag when we start the containerd binary, there is no need
to write it both to the generated config-file and pass it as flag.
This patch also slightly changes the behavior; as both dockerd and containerd use
"info" as default log-level, don't set the log-level if it's the default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding a remote.configFile to store the location instead of re-constructing its
location each time. Also fixing a minor inconsistency in the error formats.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding a remote.pidFile to store the location instead of re-constructing its
location each time. Also performing a small refactor to use `strconv.Itoa`
instead of `fmt.Sprintf`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Containerd, like dockerd has a OOMScore configuration option to adjust its own
OOM score. In dockerd, this option was added when default installations were not
yet running the daemon as a systemd unit, which made it more complicated to set
the score, and adding a daemon option was convenient.
A binary adjusting its own score has been frowned upon, as it's more logical to
make that the responsibility of the process manager _starting_ the daemon, which
is what we did for dockerd in 21578530d7.
There have been discussions on deprecating the daemon flag for dockerd, and
similar discussions have been happening for containerd.
This patch changes how we set the OOM score for the containerd child process,
and to have dockerd (supervisor) set the OOM score, as it's acting as process
manager in this case (performing a role similar to systemd otherwise).
With this patch, the score is still adjusted as usual, but not written to the
containerd configuration file;
dockerd --oom-score-adjust=-123
cat /proc/$(pidof containerd)/oom_score_adj
-123
As a follow-up, we may consider to adjust the containerd OOM score based on the
daemon's own score instead of on the `cli.OOMScoreAdjust` configuration so that
we will also adjust the score in situations where dockerd's OOM score was set
through other ways (systemd or manually adjusting the cgroup). A TODO was added
for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Consider Address() (Config.GRPC.Addres) to be the source of truth for
the location of the containerd socket.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This RWMutex was added in 9c4570a958, and used in
the `remote.Client()` method. Commit dd2e19ebd5
split the code for client and daemon, but did not remove the mutex.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The existing implementation used a `nil` value for the CRI plugin's configuration
to indicate that the plugin had to be disabled. Effectively, the `Plugins` value
was only used as an intermediate step, only to be removed later on, and to instead
add the given plugin to `DisabledPlugins` in the containerd configuration.
This patch removes the intermediate step; as a result we also don't need to mask
the containerd `Plugins` field, which was added to allow serializing the toml.
A code comment was added as well to explain why we're (currently) disabling the
CRI plugin by default, which may help future visitors of the code to determin
if that default is still needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the `WithRemoteAddr()`, `WithRemoteAddrUser()`, `WithDebugAddress()`,
and `WithMetricsAddress()` options, added in ddae20c032,
but most of them were never used, and `WithRemoteAddr()` no longer in use since
dd2e19ebd5.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the postContainersKill() handler to pass values as-is. As part of
the rewrite, I also moved the daemon.GetContainer(name) call later in the
function, so that we can fail early if an invalid signal is passed, before
doing the (heavier) fetching of the container.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Arbitrary here does not include '', best to catch that one early as it's
almost certainly a mistake (possibly an attempt to pass a POSIX path
through this API)
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
Windows Server 2016 (RS1) reached end of support, and Docker Desktop requires
Windows 10 V19H2 (version 1909, build 18363) as a minimum.
This patch makes Windows Server RS5 / ltsc2019 (build 17763) the minimum version
to run the daemon, and removes some hacks for older versions of Windows.
There is one check remaining that checks for Windows RS3 for a workaround
on older versions, but recent changes in Windows seemed to have regressed
on the same issue, so I kept that code for now to check if we may need that
workaround (again);
085c6a98d5/daemon/graphdriver/windows/windows.go (L319-L341)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
