Similar to the (now removed) `apparmor` build tag, this build-time toggle existed for users who needed to build without the `libseccomp` library. That's no longer necessary, and given the importance of seccomp to the overall default security profile of Docker containers, it makes sense that any binary built for Linux should support (and use by default) seccomp if the underlying host does.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
- remove isErrNoSuchProcess() in favor of a plain errors.As()
- errNoSuchProcess.Error(): remove punctuation
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows the postContainersKill() handler to pass values as-is. As part of
the rewrite, I also moved the daemon.GetContainer(name) call later in the
function, so that we can fail early if an invalid signal is passed, before
doing the (heavier) fetching of the container.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The libtrust trust-key is only used for pushing legacy image manifests;
pushing these images has been deprecated, and we only need to be able
to push them in our CI.
This patch disables generating the trust-key (and related paths) unless
the DOCKER_ALLOW_SCHEMA1_PUSH_DONOTUSE env-var is set (which we do in
our CI).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change is in preparation of deprecating support for old manifests.
Currently the daemon's ID is based on the trust-key ID, which will be
removed once we fully deprecate support for old manifests (the trust
key is currently only used in tests).
This patch:
- looks if a trust-key is present; if so, it migrates the trust-key
ID to the new "engine-id" file within the daemon's root.
- if no trust-key is present (so in case it's a "fresh" install), we
generate a UUID instead and use that as ID.
The migration is to prevent engines from getting a new ID on upgrades;
while we don't provide any guarantees on the engine's ID, users may
expect the ID to be "stable" (not change) between upgrades.
A test has been added, which can be ran with;
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER='TestConfigDaemonID' test-integration
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make sure we validate the default address given before using it, and
combine the parsing/validation logic so that it can be reused.
This patch also makes the errors more consistent, and uses pkg/errors
for generating them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the default (0) value to indicate "not set", which simplifies
working with these configuration options, preventing the need to
use intermediate variables etc.
While changing this code, also making some small cleanups, such
as replacing "fmt.Sprintf()" for "strconv" variants.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This method returned the network controller, only to set it on the daemon.
While making this change, also;
- update some error messages to be in the correct format
- use errors.Wrap() where possible
- extract configuring networks into a separate function to make the flow
slightly easier to follow.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting an exec can take a significant amount of time while under heavy
container operation load. In extreme cases the time to start the process
can take upwards of a second, which is a significant fraction of the
default health probe timeout (30s). With a shorter timeout, the exec
start delay could make the difference between a successful probe and a
probe timeout! Mitigate the impact of excessive exec start latencies by
only starting the probe timeout timer after the exec'ed process has
started.
Add a metric to sample the latency of starting health-check exec probes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
reloadMaxDownloadAttempts() is used to reload the configuration,
but validation happened before merging the config with the defaults.
This removes the validation from this function, instead centralizing
validation in config.Validate().
NOTE:
Currently this validation is "ok", as it checks for "nil" values;
I am working on changes to reduce the use of pointers in the config,
and instead provide a mechanism to fill in defaults. This change is
in preparation of that.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Reload logic is problematic and needs a rewrite.
Currently, config.Reload() is validating newConfig before the reload callback
is executed. At that point, newConfig may be a partial configuration, yet to be
merged with the existing configuration (in the "reload()" callback). Validating
this config before it's merged can result in incorrect validation errors.
However, the current "reload()" callback we use is DaemonCli.reloadConfig(),
which includes a call to Daemon.Reload(), which both performs "merging" and
validation, as well as actually updating the daemon configuration. Calling
DaemonCli.reloadConfig() *before* validation, could thus lead to a failure in
that function (making the reload non-atomic).
While *some* errors could always occur when applying/updating the config, we
should make it more atomic, and;
1. get (a copy of) the active configuration
2. get the new configuration
3. apply the (reloadable) options from the new configuration
4. validate the merged results
5. apply the new configuration.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
MergeDaemonConfigurations was validating the configs before and after
merging. However, the "fileConfig" configuration may contain only a
"partial" configuration (options to apply to / override the existing
config). This means that some options may not be set and contain default
or empty values.
Validating such partial configurations can produce validation failures,
so to prevent those, we should validate the configuration _after_
merging, to validate the "final" state.
There's more cleaning up / improvements to be made in this area; for
example, we currently use our "self crafted" `getConflictFreeConfiguration()`
function, which is used to detect options that are not allowed to
be overridden, and which could potentially be handled by mergo.Merge(),
but leaving those changes for a future exercise.
This patch removes the first validation step, changing the function
to only validate the resulting configuration after merging.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Log-level validation was previously performed when configuring the daemon-logs;
this moves the validation to config.Validate() so that we can catch invalid
settings when running dockerd --validate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a method on the daemon, which itself holds the Config, so
there's no need to pass the same configuration as an argument.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit replaces `os.Setenv` with `t.Setenv` in tests. The
environment variable is automatically restored to its original value
when the test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.Setenv
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
These were only exported to facilitate ImageService.GetRepository() (used for
the `GET /distribution/{name:.*}/json` endpoint.
Moving the core functionality of that to the distribution package makes it
more consistent with (e.g.) "pull" operations, and allows us to keep more things
internal.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some packages were using `logrus.Fatal()` in init functions (which logs the error,
and (by default) calls `os.Exit(1)` after logging).
Given that logrus formatting and outputs have not yet been configured during the
initialization stage, it does not provide much benefits over a plain `panic()`.
This patch replaces some instances of `logrus.Fatal()` with `panic()`, which has
the added benefits of not introducing logrus as a dependency in some of these
packages, and also produces a stacktrace, which could help locating the problem
in the unlikely event an `init()` fails.
Before this change, an error would look like:
$ dockerd
FATA[0000] something bad happened
After this change, the same error looks like:
$ dockerd
panic: something bad happened
goroutine 1 [running]:
github.com/docker/docker/daemon/logger/awslogs.init.0()
/go/src/github.com/docker/docker/daemon/logger/awslogs/cloudwatchlogs.go:128 +0x89
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Containers can have a default stop-signal (`--stop-signal` / `STOPSIGNAL`) and
timeout (`--stop-timeout`). It is currently not possible to update either of
these after the container is created (`docker update` does not allow updating
them), and while either of these can be overridden through some commands, we
currently do not have a command that can override *both*:
command | stop-signal | stop-timeout | notes
----------------|-------------|--------------|----------------------------
docker kill | yes | DNA | only sends a single signal
docker restart | no | yes |
docker stop | no | yes |
As a result, if a user wants to stop a container with a custom signal and
timeout, the only option is to do this manually:
docker kill -s <custom signal> mycontainer
# wait <desired timeout>
# press ^C to cancel the graceful stop
# forcibly kill the container
docker kill mycontainer
This patch adds a new `signal` query parameter to the container "stop" and
"restart" endpoints. This parameter can be added as a new flag on the CLI,
which would allow stopping and restarting with a custom timeout and signal,
for example:
docker stop --signal=SIGWINCH --time=120 mycontainer
docker restart --signal=SIGWINCH --time=120 mycontainer
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
