The field will still be present in the response, but will always be
`false`.
Searching for `is-automated=true` will yield no results, while
`is-automated=false` will effectively be a no-op.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
In a container-create API request, HostConfig.NetworkMode (the identity
of the "main" network) may be a name, id or short-id.
The configuration for that network, including preferred IP address etc,
may be keyed on network name or id - it need not match the NetworkMode.
So, when migrating the old container-wide MAC address to the new
per-endpoint field - it is not safe to create a new EndpointSettings
entry unless there is no possibility that it will duplicate settings
intended for the same network (because one of the duplicates will be
discarded later, dropping the settings it contains).
This change introduces a new API restriction, if the deprecated container
wide field is used in the new API, and EndpointsConfig is provided for
any network, the NetworkMode and key under which the EndpointsConfig is
store must be the same - no mixing of ids and names.
Signed-off-by: Rob Murray <rob.murray@docker.com>
This patch disables pulling legacy (schema1 and schema 2, version 1) images by
default.
A `DOCKER_ENABLE_DEPRECATED_PULL_SCHEMA_1_IMAGE` environment-variable is
introduced to allow re-enabling this feature, aligning with the environment
variable used in containerd 2.0 (`CONTAINERD_ENABLE_DEPRECATED_PULL_SCHEMA_1_IMAGE`).
With this patch, attempts to pull a legacy image produces an error:
With graphdrivers:
docker pull docker:1.0
1.0: Pulling from library/docker
[DEPRECATION NOTICE] Docker Image Format v1, and Docker Image manifest version 2, schema 1 support will be removed in an upcoming release. Suggest the author of docker.io/library/docker:1.0 to upgrade the image to the OCI Format, or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/
With the containerd image store enabled, output is slightly different
as it returns the error before printing the `1.0: pulling ...`:
docker pull docker:1.0
Error response from daemon: [DEPRECATION NOTICE] Docker Image Format v1 and Docker Image manifest version 2, schema 1 support is disabled by default and will be removed in an upcoming release. Suggest the author of docker.io/library/docker:1.0 to upgrade the image to the OCI Format or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/
Using the "distribution" endpoint to resolve the digest for an image also
produces an error:
curl -v --unix-socket /var/run/docker.sock http://foo/distribution/docker.io/library/docker:1.0/json
* Trying /var/run/docker.sock:0...
* Connected to foo (/var/run/docker.sock) port 80 (#0)
> GET /distribution/docker.io/library/docker:1.0/json HTTP/1.1
> Host: foo
> User-Agent: curl/7.88.1
> Accept: */*
>
< HTTP/1.1 400 Bad Request
< Api-Version: 1.45
< Content-Type: application/json
< Docker-Experimental: false
< Ostype: linux
< Server: Docker/dev (linux)
< Date: Tue, 27 Feb 2024 16:09:42 GMT
< Content-Length: 354
<
{"message":"[DEPRECATION NOTICE] Docker Image Format v1, and Docker Image manifest version 2, schema 1 support will be removed in an upcoming release. Suggest the author of docker.io/library/docker:1.0 to upgrade the image to the OCI Format, or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/"}
* Connection #0 to host foo left intact
Starting the daemon with the `DOCKER_ENABLE_DEPRECATED_PULL_SCHEMA_1_IMAGE`
env-var set to a non-empty value allows pulling the image;
docker pull docker:1.0
[DEPRECATION NOTICE] Docker Image Format v1 and Docker Image manifest version 2, schema 1 support is disabled by default and will be removed in an upcoming release. Suggest the author of docker.io/library/docker:1.0 to upgrade the image to the OCI Format or Docker Image manifest v2, schema 2. More information at https://docs.docker.com/go/deprecated-image-specs/
b0a0e6710d13: Already exists
d193ad713811: Already exists
ba7268c3149b: Already exists
c862d82a67a2: Already exists
Digest: sha256:5e7081837926c7a40e58881bbebc52044a95a62a2ea52fb240db3fc539212fe5
Status: Image is up to date for docker:1.0
docker.io/library/docker:1.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Don't change the behavior for older clients and keep the same behavior.
Otherwise client can't opt-out (because `ReadOnlyNonRecursive` is
unsupported before 1.44).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This matches the prior behavior before 2a6ff3c24f.
This also updates the Swagger documentation for the current version to note that the field might be the empty string and what that means.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
This const contains the minimum API version that can be supported by the
API server. The daemon is currently configured to use the same version,
but we may increment the _configured_ minimum version when deprecating
old API versions in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.20 (Docker Engine v1.11.0) and older allowed a HostConfig to be passed
when starting a container. This feature was deprecated in API v1.21 (Docker
Engine v1.10.0) in 3e7405aea8, and removed in
API v1.23 (Docker Engine v1.12.0) in commit 0a8386c8be.
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 322e2a7d05 changed the format of errors
returned by the API to be in JSON format for API v1.24. Older versions of
the API returned errors in plain-text format.
API v1.23 and older are deprecated, so we can remove support for plain-text
error responses.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This endpoint was deprecated in API v1.20 (Docker Engine v1.8.0) in
commit db9cc91a9e, in favor of the
`PUT /containers/{id}/archive` and `HEAD /containers/{id}/archive`
endpoints, and disabled in API v1.24 (Docker Engine v1.12.0) through
commit 428328908d.
This patch removes the endpoint, and the associated `daemon.ContainerCopy`
method in the backend.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.21 (Docker Engine v1.9.0) enforces the request to have a JSON
content-type on exec start (see 45dc57f229).
An exception was added in 0b5e628e14 to
make this check conditional (supporting API < 1.21).
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.20 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.19 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.20 and up produces an error when signalling / killing a non-running
container (see c92377e300). Older API versions
allowed this, and an exception was added in 621e3d8587.
API v1.23 and older are deprecated, so we can remove this handling.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API versions before 1.19 allowed CpuShares that were greater than the maximum
or less than the minimum supported by the kernel, and relied on the kernel to
do the right thing.
Commit ed39fbeb2a introduced code to adjust the
CPU shares to be within the accepted range when using API version 1.18 or
lower.
API v1.23 and older are deprecated, so we can remove support for this
functionality.
Currently, there's no validation for CPU shares to be within an acceptable
range; a TODO was added to add validation for this option, and to use the
`linuxMinCPUShares` and `linuxMaxCPUShares` consts for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "pull" option was added in API v1.16 (Docker Engine v1.4.0) in commit
054e57a622, which gated the option by API
version.
API v1.23 and older are deprecated, so we can remove the gate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "rm" option was made the default in API v1.12 (Docker Engine v1.0.0)
in commit b60d647172, and "force-rm" was
added in 667e2bd4ea.
API v1.23 and older are deprecated, so we can remove these gates.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "pause" flag was added in API v1.13 (Docker Engine v1.1.0), and is
enabled by default (see 17d870bed5).
API v1.23 and older are deprecated, so we can remove the version-gate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 4f47013feb introduced a new validation step to make sure no
IPv6 subnet is configured on a network which has EnableIPv6=false.
Commit 5d5eeac310 then removed that validation step and automatically
enabled IPv6 for networks with a v6 subnet. But this specific commit
was reverted in c59e93a67b and now the error introduced by 4f47013feb
is re-introduced.
But it turns out some users expect a network created with an IPv6
subnet and EnableIPv6=false to actually have no IPv6 connectivity.
This restores that behavior.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The API's EndpointConfig struct has a MacAddress field that's used for
both the configured address, and the current address (which may be generated).
A configured address must be restored when a container is restarted, but a
generated address must not.
The previous attempt to differentiate between the two, without adding a field
to the API's EndpointConfig that would show up in 'inspect' output, was a
field in the daemon's version of EndpointSettings, MACOperational. It did
not work, MACOperational was set to true when a configured address was
used. So, while it ensured addresses were regenerated, it failed to preserve
a configured address.
So, this change removes that code, and adds DesiredMacAddress to the wrapped
version of EndpointSettings, where it is persisted but does not appear in
'inspect' results. Its value is copied from MacAddress (the API field) when
a container is created.
Signed-off-by: Rob Murray <rob.murray@docker.com>
These types were deprecated in v25.0, and moved to api/types/container;
This patch removes the aliases for;
- api/types.ResizeOptions (deprecated in 95b92b1f97)
- api/types.ContainerAttachOptions (deprecated in 30f09b4a1a)
- api/types.ContainerCommitOptions (deprecated in 9498d897ab)
- api/types.ContainerRemoveOptions (deprecated in 0f77875220)
- api/types.ContainerStartOptions (deprecated in 7bce33eb0f)
- api/types.ContainerListOptions (deprecated in 9670d9364d)
- api/types.ContainerLogsOptions (deprecated in ebef4efb88)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in v25.0, and moved to api/types/swarm;
This patch removes the aliases for;
- api/types.ServiceUpdateResponse (deprecated in 5b3e6555a3)
- api/types.ServiceCreateResponse (deprecated in ec69501e94)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in 48cacbca24
(v25.0), and moved to api/types/image.
This patch removes the aliases for;
- api/types.ImageDeleteResponseItem
- api/types.ImageSummary
- api/types.ImageMetadata
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in b688af2226
(v25.0), and moved to api/types/checkpoint.
This patch removes the aliases for;
- api/types.CheckpointCreateOptions
- api/types.CheckpointListOptions
- api/types.CheckpointDeleteOptions
- api/types.Checkpoint
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in c90229ed9a
(v25.0), and moved to api/types/system.
This patch removes the aliases for;
- api/types.Info
- api/types.Commit
- api/types.PluginsInfo
- api/types.NetworkAddressPool
- api/types.Runtime
- api/types.SecurityOpt
- api/types.KeyValue
- api/types.DecodeSecurityOptions
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `GetImageOpts` struct is used for options to be passed to the backend,
and are not used in client code. This struct currently is intended for internal
use only.
This patch moves the `GetImageOpts` struct to the backend package to prevent
it being imported in the client, and to make it more clear that this is part
of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`VolumeOptions` now has a `Subpath` field which allows to specify a path
relative to the volume that should be mounted as a destination.
Symlinks are supported, but they cannot escape the base volume
directory.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
We have many "image" packages, so these vars easily conflict/shadow
imports. Let's rename them (and in some cases use a const) to
prevent that.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the daemon is configured to use a mirror for the default (Docker Hub)
registry, the endpoint did not fall back to querying the upstream if the mirror
did not contain the given reference.
If the daemon is configured to use a mirror for the default (Docker Hub)
registry, did not fall back to querying the upstream if the mirror did not
contain the given reference.
For pull-through registry-mirrors, this was not a problem, as in that case the
registry would forward the request, but for other mirrors, no fallback would
happen. This was inconsistent with how "pulling" images handled this situation;
when pulling images, both the mirror and upstream would be tried.
This problem was caused by the logic used in GetRepository, which had an
optimization to only return the first registry it was successfully able to
configure (and connect to), with the assumption that the mirror either contained
all images used, or to be configured as a pull-through mirror.
This patch:
- Introduces a GetRepositories method, which returns all candidates (both
mirror(s) and upstream).
- Updates the endpoint to try all
Before this patch:
# the daemon is configured to use a mirror for Docker Hub
cat /etc/docker/daemon.json
{ "registry-mirrors": ["http://localhost:5000"]}
# start the mirror (empty registry, not configured as pull-through mirror)
docker run -d --name registry -p 127.0.0.1:5000:5000 registry:2
# querying the endpoint fails, because the image-manifest is not found in the mirror:
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.43/distribution/docker.io/library/hello-world:latest/json
{
"message": "manifest unknown: manifest unknown"
}
With this patch applied:
# the daemon is configured to use a mirror for Docker Hub
cat /etc/docker/daemon.json
{ "registry-mirrors": ["http://localhost:5000"]}
# start the mirror (empty registry, not configured as pull-through mirror)
docker run -d --name registry -p 127.0.0.1:5000:5000 registry:2
# querying the endpoint succeeds (manifest is fetched from the upstream Docker Hub registry):
curl -s --unix-socket /var/run/docker.sock http://localhost/v1.43/distribution/docker.io/library/hello-world:latest/json | jq .
{
"Descriptor": {
"mediaType": "application/vnd.oci.image.index.v1+json",
"digest": "sha256:1b9844d846ce3a6a6af7013e999a373112c3c0450aca49e155ae444526a2c45e",
"size": 3849
},
"Platforms": [
{
"architecture": "amd64",
"os": "linux"
}
]
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The following fields are never written and are now marked as deprecated:
- `HairpinMode`
- `LinkLocalIPv6Address`
- `LinkLocalIPv6PrefixLen`
- `SecondaryIPAddress`
- `SecondaryIPv6Addresses`
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Instead of special-casing anonymous endpoints in libnetwork, let the
daemon specify what (non fully qualified) DNS names should be associated
to container's endpoints.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
