This test was rewritten from an integration-cli test in commit
68d9beedbe, and originally implemented in
f4942ed864, which rewrote it from a unit-
test to an integration test.
Originally, it would check for the raw JSON response from the daemon, and
check for individual fields to be present in the output, but after commit
0fd5a65428, `client.Info()` was used, and
now the response is unmarshalled into a `system.Info`.
The remainder of the test remained the same in that rewrite, and as a
result were were now effectively testing if a `system.Info` struct,
when marshalled as JSON would show all the fields (surprise: it does).
TL;DR; the test would even pass with an empty `system.Info{}` struct,
which didn't provide much coverage, as it passed without a daemon:
func TestInfoAPI(t *testing.T) {
// always shown fields
stringsToCheck := []string{
"ID",
"Containers",
"ContainersRunning",
"ContainersPaused",
"ContainersStopped",
"Images",
"LoggingDriver",
"OperatingSystem",
"NCPU",
"OSType",
"Architecture",
"MemTotal",
"KernelVersion",
"Driver",
"ServerVersion",
"SecurityOptions",
}
out := fmt.Sprintf("%+v", system.Info{})
for _, linePrefix := range stringsToCheck {
assert.Check(t, is.Contains(out, linePrefix))
}
}
This patch makes the test _slightly_ better by checking if the fields
are non-empty. More work is needed on this test though; currently it
uses the (already running) daemon, so it's hard to check for specific
fields to be correct (withouth knowing state of the daemon), but it's
not unlikely that other tests (partially) cover some of that. A TODO
comment was added to look into that (we should probably combine some
tests to prevent overlap, and make it easier to spot "gaps" as well).
While working on this, also moving the `SystemTime` into this test,
because that field is (no longer) dependent on "debug" state
(It is was actually this change that led me down this rabbit-hole)
()_()
(-.-)
'(")(")'
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Following tests are implemented in this specific commit:
- Inter-container communications for internal and non-internal
bridge networks, over IPv4 and IPv6.
- Inter-container communications using IPv6 link-local addresses for
internal and non-internal bridge networks.
- Inter-network communications for internal and non-internal bridge
networks, over IPv4 and IPv6, are disallowed.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This commit introduces a new integration test suite aimed at testing
networking features like inter-container communication, network
isolation, port mapping, etc... and how they interact with daemon-level
and network-level parameters.
So far, there's pretty much no tests making sure our networks are well
configured: 1. there're a few tests for port mapping, but they don't
cover all use cases ; 2. there're a few tests that check if a specific
iptables rule exist, but that doesn't prevent that specific iptables
rule to be wrong in the first place.
As we're planning to refactor how iptables rules are written, and change
some of them to fix known security issues, we need a way to test all
combinations of parameters. So far, this was done by hand, which is
particularly painful and time consuming. As such, this new test suite is
foundational to upcoming work.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This delete was originally added in b37fdc5dd1
and migrated from `deleteImages(repoName)` in commit 1e55ace875,
however, deleting `foobar-save-multi-images-test` (`foobar-save-multi-images-test:latest`)
always resulted in an error;
Error response from daemon: No such image: foobar-save-multi-images-test:latest
This patch removes the redundant image delete.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Shutting down containers on Windows can take a long time (with hyper-v),
causing this test to be flaky; seen failing on windows 2022;
=== FAIL: github.com/docker/docker/integration/image TestSaveRepoWithMultipleImages (23.16s)
save_test.go:104: timeout waiting for container to exit
Looking at the test, we run a container only to commit it, and the test
does not make changes to the container's filesystem; it only runs a container
with a custom command (`true`).
Instead of running the container, we can _create_ a container and commit it;
this simplifies the tests, and prevents having to wait for the container to
exit (before committing).
To verify:
make BIND_DIR=. DOCKER_GRAPHDRIVER=vfs TEST_FILTER=TestSaveRepoWithMultipleImages test-integration
INFO: Testing against a local daemon
=== RUN TestSaveRepoWithMultipleImages
--- PASS: TestSaveRepoWithMultipleImages (1.20s)
PASS
DONE 1 tests in 2.668s
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds test ensuring that additional groups set with `--group-add`
are kept on exec when container had `--user` set on run.
Regression test for https://github.com/moby/moby/issues/46712
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
commit def549c8f6 passed through the context
to the daemon.ContainerStart function. As a result, restarting containers
no longer is an atomic operation, because a context cancellation could
interrupt the restart (between "stopping" and "(re)starting"), resulting
in the container being stopped, but not restarted.
Restarting a container, or more factually; making a successful request on
the `/containers/{id]/restart` endpoint, should be an atomic operation.
This patch uses a context.WithoutCancel for restart requests.
It's worth noting that daemon.containerStop already uses context.WithoutCancel,
so in that function, we'll be wrapping the context twice, but this should
likely not cause issues (just redundant for this code-path).
Before this patch, starting a container that bind-mounts the docker socket,
then restarting itself from within the container would cancel the restart
operation. The container would be stopped, but not started after that:
docker run -dit --name myself -v /var/run/docker.sock:/var/run/docker.sock docker:cli sh
docker exec myself sh -c 'docker restart myself'
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
3a2a741c65ff docker:cli "docker-entrypoint.s…" 26 seconds ago Exited (128) 7 seconds ago myself
With this patch: the stop still cancels the exec, but does not cancel the
restart operation, and the container is started again:
docker run -dit --name myself -v /var/run/docker.sock:/var/run/docker.sock docker:cli sh
docker exec myself sh -c 'docker restart myself'
docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
4393a01f7c75 docker:cli "docker-entrypoint.s…" About a minute ago Up 4 seconds myself
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Check for accurate values that may contain content sizes unknown to the
usage test in the calculation. Avoid asserting using deep equals when
only the expected value range is known to the test.
Signed-off-by: Derek McGowan <derek@mcg.dev>
We support importing images for other platforms when
using the containerd image store, so we shouldn't validate
the image OS on import.
This commit also splits the test into two, so that we can
keep running the "success" import with a custom platform tests
running w/ c8d while skipping the "error/rejection" test cases.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This is a follow-up to 2216d3ca8d, which
implemented the StartInterval for health-checks, but did not add validation
for the minimum accepted interval;
> The time to wait between checks in nanoseconds during the start period.
> It should be 0 or at least 1000000 (1 ms). 0 means inherit.
This patch adds validation for the minimum accepted interval (1ms).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement a behavior from the graphdriver's export where `docker save
something` (untagged reference) would export all images matching the
specified repository.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
`docker build --squash` is an experimental feature which is not
implemented for containerd image store.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The following changes were required:
* integration/build: progressui's signature changed in 6b8fbed01e
* builder-next: flightcontrol.Group has become a generic type in 8ffc03b8f0
* builder-next/executor: add github.com/moby/buildkit/executor/resources types, necessitated by 6e87e4b455
* builder-next: stub util/network/Namespace.Sample(), necessitated by 963f16179f
Co-authored-by: CrazyMax <crazy-max@users.noreply.github.com>
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Bjorn Neergaard <bjorn.neergaard@docker.com>
Diffing a container yielded some extra changes that come from the
files/directories that we mount inside the container (/etc/resolv.conf
for example). To avoid that we create an intermediate snapshot that has
these files, with this we can now diff the container fs with its parent
and only get the differences that were made inside the container.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
This test checks how the layer store works, so we don't need it when we
use containerd as image store
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
The API endpoint `/containers/create` accepts several EndpointsConfig
since v1.22 but the daemon would error out in such case. This check is
moved from the daemon to the api and is now applied only for API < 1.44,
effectively allowing the daemon to create containers connected to
several networks.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Fixes#18864, #20648, #33561, #40901.
[This GH comment][1] makes clear network name uniqueness has never been
enforced due to the eventually consistent nature of Classic Swarm
datastores:
> there is no guaranteed way to check for duplicates across a cluster of
> docker hosts.
And this is further confirmed by other comments made by @mrjana in that
same issue, eg. [this one][2]:
> we want to adopt a schema which can pave the way in the future for a
> completely decentralized cluster of docker hosts (if scalability is
> needed).
This decentralized model is what Classic Swarm was trying to be. It's
been superseded since then by Docker Swarm, which has a centralized
control plane.
To circumvent this drawback, the `NetworkCreate` endpoint accepts a
`CheckDuplicate` flag. However it's not perfectly reliable as it won't
catch concurrent requests.
Due to this design decision, API clients like Compose have to implement
workarounds to make sure names are really unique (eg.
docker/compose#9585). And the daemon itself has seen a string of issues
due to that decision, including some that aren't fixed to this day (for
instance moby/moby#40901):
> The problem is, that if you specify a network for a container using
> the ID, it will add that network to the container but it will then
> change it to reference the network by using the name.
To summarize, this "feature" is broken, has no practical use and is a
source of pain for Docker users and API consumers. So let's just remove
it for _all_ API versions.
[1]: https://github.com/moby/moby/issues/18864#issuecomment-167201414
[2]: https://github.com/moby/moby/issues/18864#issuecomment-167202589
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
container.Run() should be a synchronous operation in normal circumstances;
the container is created and started, so polling after that for the
container to be in the "running" state should not be needed.
This should also prevent issues when a container (for whatever reason)
exited immediately after starting; in that case we would continue
polling for it to be running (which likely would never happen).
Let's skip the polling; if the container is not in the expected state
(i.e. exited), tests should fail as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon would pass an EndpointCreateOption to set the interface MAC
address if the network name and the provided network mode were matching.
Obviously, if the network mode is a network ID, it won't work. To make
things worse, the network mode is never normalized if it's a partial ID.
To fix that: 1. the condition under what the container's mac-address is
applied is updated to also match the full ID; 2. the network mode is
normalized to a full ID when it's only a partial one.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Reduce some of the boiler-plating, and by combining the tests, we skip
the testenv.Clean() in between each of the tests. Performance gain isn't
really measurable, but every bit should help :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
container.Run should be an synchronous operation; the container should
be running after the request was made (or produce an error). Simplify
these tests, and remove the redundant polling.
These were added as part of 8f800c9415,
but no such polls were in place before the refactor, and there's no
mention of these during review of the PR, so I assume these were just
added either as a "precaution", or a result of "copy/paste" from another
test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was failing frequently on Windows, where the test was waiting
for the container to exit before continuing;
=== FAIL: github.com/docker/docker/integration/container TestResizeWhenContainerNotStarted (18.69s)
resize_test.go:58: timeout hit after 10s: waiting for container to be one of (exited), currently running
It looks like this test is merely validating that a container in any non-
running state should produce an error, so there's no need to run a container
(waiting for it to stop), and just "creating" a container (which would be
in `created` state) should work for this purpose.
Looking at 8f800c9415, I see `createSimpleContainer`
and `runSimpleContainer` utilities were added, so I'm even wondering if the
original intent was to use `createSimpleContainer` for this test.
While updating, also check if we get the expected error-type, instead of
only checking for the error-message.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Integration tests will now configure clients to propagate traces as well
as create spans for all tests.
Some extra changes were needed (or desired for trace propagation) in the
test helpers to pass through tracing spans via context.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This uses otel standard environment variables to configure tracing in
the daemon.
It also adds support for propagating trace contexts in the client and
reading those from the API server.
See
https://opentelemetry.io/docs/specs/otel/configuration/sdk-environment-variables/
for details on otel environment variables.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Make sure that the content in the live-restored volume mounted in a new
container is the same as the content in the old container.
This checks if volume's _data directory doesn't get unmounted on
startup.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
