Signal systemd when we start shutting down to complement the "READY" notify
that was originally implemented in 97088ebef7
From [sd_notify(3)](https://www.freedesktop.org/software/systemd/man/sd_notify.html#STOPPING=1)
> STOPPING=1
> Tells the service manager that the service is beginning its shutdown. This is useful
> to allow the service manager to track the service's internal state, and present it to
> the user.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer does not guarantee a stable API, and is not intended
for external consumers.
this patch replaces some uses of libcontainer/cgroups with
containerd/cgroups.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon expects to manage/handle everything going into the containerd namespace it uses, and things break when it shares that namespace with a second instance, so we should expose these flags and expect users that want two daemons sharing a containerd instance to use separate namespaces for them.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
dockerd currently sets the oom-score-adjust itself. This functionality
was added when we did not yet run dockerd as a systemd service.
Now that we do, it's better to instead have systemd handle this.
Keeping the option itself for situations where dockerd is started
manually or without using systemd.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/spf13/cobra/compare/v0.0.3...v1.0.0
Notable Changes
- Fish completion (including support for Go custom completion)
- API (urgent): Rename BashCompDirectives to ShellCompDirectives
- Remove/replace SetOutput on Command - deprecated
- Custom completions coded in Go (instead of Bash)
- Partial Revert of 922
- Correct documentation for InOrStdin
- Apply formatting to templates
- Revert change so help is printed on stdout again
- Update md2man to v2.0.0
- update viper to v1.4.0
- Update cmd/root.go example in README.md
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 1470697b67 marked this flag
as deprecated, but inadvertedtly used the plural (which is used
for `daemon.json`, but not for the flag name.
This fixes the inccorect name of the flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Close#40484
Note that the support for cgroup v2 isn't ready for production yet,
regardless to rootful or rootless.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The namespaces com.docker.*, io.docker.*, org.dockerproject.*
have been documented to be reserved for Docker's internal use.
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: Jintao Zhang <zhangjintao9020@gmail.com>
Docker Desktop (on MAC and Windows hosts) allows containers
running inside a Linux VM to connect to the host using
the host.docker.internal DNS name, which is implemented by
VPNkit (DNS proxy on the host)
This PR allows containers to connect to Linux hosts
by appending a special string "host-gateway" to --add-host
e.g. "--add-host=host.docker.internal:host-gateway" which adds
host.docker.internal DNS entry in /etc/hosts and maps it to host-gateway-ip
This PR also add a daemon flag call host-gateway-ip which defaults to
the default bridge IP
Docker Desktop will need to set this field to the Host Proxy IP
so DNS requests for host.docker.internal can be routed to VPNkit
Addresses: https://github.com/docker/for-linux/issues/264
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
This feature was used by docker build --stream and it was kept experimental.
Users of this endpoint should enable BuildKit anyway by setting Version to BuilderBuildKit.
Signed-off-by: Tibor Vass <tibor@docker.com>
Moby works perfectly when you are in a situation when one has a good and stable
internet connection. Operating in area's where internet connectivity is likely
to be lost in undetermined intervals, like a satellite connection or 4G/LTE in
rural area's, can become a problem when pulling a new image. When connection is
lost while image layers are being pulled, Moby will try to reconnect up to 5 times.
If this fails, the incompletely downloaded layers are lost will need to be completely
downloaded again during the next pull request. This means that we are using more
data than we might have to.
Pulling a layer multiple times from the start can become costly over a satellite
or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and
Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum
download attempts. The maximum download attempts is currently set at 5
(distribution/xfer/download.go). I would like to change this constant to a variable
that the user can set. The default will still be 5, so nothing will change from
the current version unless specified when starting the daemon with the added flag
or in the config file.
I added a default value of 5 for DefaultMaxDownloadAttempts and a settable
max-download-attempts in the daemon config file. It is also added to the config
of dockerd so it can be set with a flag when starting the daemon. This value gets
stored in the imageService of the daemon when it is initiated and can be passed
to the NewLayerDownloadManager as a parameter. It will be stored in the
LayerDownloadManager when initiated. This enables us to set the max amount of
retries in makeDownoadFunc equal to the max download attempts.
I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads.
You can pull this version and test in a development container. Either create a config
`file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use
`dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading
a container and disconnect from the internet whilst downloading. The result would
be that it stops pulling after three attempts.
Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cmd/dockerd/config.go:50:18: Error return value of `flags.MarkHidden` is not checked (errcheck)
cmd/dockerd/config.go:55:22: Error return value of `flags.MarkDeprecated` is not checked (errcheck)
cmd/dockerd/config.go:78:18: Error return value of `flags.MarkHidden` is not checked (errcheck)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix TODO: move into startMetricsServer()
Fix errors.Wrap return nil when passed err is nil
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: HuanHuan Ye <logindaveye@gmail.com>
also renamed the non-windows variant of this file to be
consistent with other files in this package
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This hack was added to fix a compatibility with clients
that were built using Go 1.5 and older (added in 3d6f5984f5)
This hack causes some problems with current clients; with Go 1.5 and older
no longer being supported for some time, and being several years old, it
should now be ok to remove this hack altogether.
People using tools that are built with those versions of Go wouldn't have
updated those for years, and are probably out of date anyway; that's not
something we can continue taking into account.
This will affect docker clients (the docker cli) for docker 1.12 and older.
Those versions have reached EOL a long time ago (and have known unpatched
vulnerabilities), so should no longer be used anyway, but We should add
a nebtuib in the release notes, just in case someone, somewhere, still
has such old tools.
For those affected, using a more recent client (and if needed, setting
the DOCKER_API_VERSION environment variable to the needed API version)
should provide a way out.
This reverts the changes originally made in; #22000 and #22888,
which were to address #20865.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change:
dockerd -H unix:///run/docker.sock -H unix:///run/docker.sock -H unix:///run/docker.sock
...
INFO[2019-07-13T00:02:36.195090937Z] Daemon has completed initialization
INFO[2019-07-13T00:02:36.215940441Z] API listen on /run/docker.sock
INFO[2019-07-13T00:02:36.215933172Z] API listen on /run/docker.sock
INFO[2019-07-13T00:02:36.215990566Z] API listen on /run/docker.sock
After this change:
dockerd -H unix:///run/docker.sock -H unix:///run/docker.sock -H unix:///run/docker.sock
...
INFO[2019-07-13T00:01:37.533579874Z] Daemon has completed initialization
INFO[2019-07-13T00:01:37.567045771Z] API listen on /run/docker.sock
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
These options configure the parent cgroup, not the default for containers,
nor the daemon itself, so adding that information to the flag description
to make this slightly more clear.
relates to 56f77d5ade (#23430) which implemented
these flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
