That method was only referenced by ipam.Allocator, but as it no longer
stores any state persistently there is no possibility for it to load an
inconsistent bit-sequence from Docker 1.9.x.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Without (*Controller).ReloadConfiguration, the only way to configure
datastore scopes would be by passing config.Options to libnetwork.New.
The only options defined which relate to datastore scopes are limited to
configuring the local-scope datastore. Furthermore, the default
datastore config only defines configuration for the local-scope
datastore. The local-scope datastore is therefore the only datastore
scope possible in libnetwork. Start removing code which is only
needed to support multiple datastore scopes.
Signed-off-by: Cory Snider <csnider@mirantis.com>
*bitseq.Handle should not implement sync.Locker. The mutex is a private
implementation detail which external consumers should not be able to
manipulate.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Perhaps the testutils package in the past had an `init()` function to set up
specific things, but it no longer has. so these imports were doing nothing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libnetwork does different stuff depending on if you are running the
tests in a container or not... without telling it we are in a container
a bunch of the tests actually fail.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This commit contains fixes for duplicate IP with 3 issues addressed:
1) Race condition when datastore is not present in cases like swarmkit
2) Byte Offset calculation depending on where the start of the bit
in the bitsequence is, the offset was adding more bytes to the offset
when the start of the bit is in the middle of one of the instances in
a block
3) Finding the available bit was returning the last bit in the curent instance in
a block if the block is not full and the current bit is after the last
available bit.
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
Since bit allocation is no longer first available from
the start some verfications are removed/modified to
the change allocation model
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
Previously the bitseq alloc was allocating the first available bit from the
begining of the sequence. With this commit the bitseq alloc will proceed
from the current allocation. This change will affect the way ipam and vni
allocation is done currently. The ip allocation will be done sequentially
from the previous allocation as opposed to the first available IP.
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
The byteoffset calculation was skewed to double include
the offset value calculated. The double calculation
happens if the starting ordinal is part of the head
sequence block. This error in calculation could result
in duplicate but getting allocated eventually propogating
to ipam and vni id allocations
Signed-off-by: Abhinandan Prativadi <abhi@docker.com>
This fix tries to fix logrus formatting by removing `f` from
`logrus.[Error|Warn|Debug|Fatal|Panic|Info]f` when formatting string
is not present.
Also fix import name to use original project name 'logrus' instead of
'log'
Signed-off-by: Daehyeok Mun <daehyeok@gmail.com>
Currently datastore has dependencies on various kv backends.
This is undesirable if datastore had to be used as a backend
agnostic store management package with it's cache layer. This
PR aims to achieve that.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- Remove from contract predefined errors which are no longer
valid (ex. ErrInvalidIpamService, ErrInvalidIpamConfigService)
- Do not use network driver error for ipam load failure in controller.go
- Bitseq to expose two well-known errors (no more bit available, bit is already set)
- Default ipam to report proper well-known error on RequestAddress()
based on bitseq returned error
- Default ipam errors to comply with types error interface
Signed-off-by: Alessandro Boch <aboch@docker.com>
- pushReservation fails to correctly detect when
the affected block is the last in the current
sequence. It thinks instead the block is in between
the sequence. Because of this a couple of issues
may happen:
1. The allocation of the last bit causes the creation
of a phantom sequence (length 0) at the end.
(This has no side effects).
2. The allocation of a bit somewhere in the middle of
the bitmask may lead to a completely incorrect
sequence pattern.
Signed-off-by: Alessandro Boch <aboch@docker.com>
- Set bridge ipv4 address when bridge is present
- IPv6 changes for bridge
- Convert unit tests to the new model
Signed-off-by: Alessandro Boch <aboch@docker.com>
Remove the need for watching for IPAM data
structures and add multi store support code and
data reorganization to simplify address space
management.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
- When creating the handle, write it to store if
not present. Currently it is written to store
only on first bit allocation.
Signed-off-by: Alessandro Boch <aboch@docker.com>
This way we won't vendor test related functions in docker anymore.
It also moves netns related functions to a new ns package to be able to
call the ns init function in tests. I think this also helps with the
overall package isolation.
Signed-off-by: David Calavera <david.calavera@gmail.com>
