As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This fix is based on:
https://github.com/docker/docker/issues/29936#issuecomment-277494885
Currently the insecure registry is only checked to see if it contains
scheme (`http(s)://`) or not. No fully validation is done and this
caused many confusions like in #29936.
This fix tries to address the issue.
This fix adds additional validation so that an insecure registry
is validated to make sure it is in `host:port` format where host
could be IPv4/IPv6 or a host name, and port could be an integer
between 0-65535.
Additional unit tests have been added.
This fix is related to #29936.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Remove forked reference package. Use normalized named values
everywhere and familiar functions to convert back to familiar
strings for UX and storage compatibility.
Enforce that the source repository in the distribution metadata
is always a normalized string, ignore invalid values which are not.
Update distribution tests to use normalized values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Use resolving to repo info as the split point between the
legitimate reference package and forked reference package.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
While investigating 29936 I noticed one potential issue
in `LoadInsecureRegistries`.
The implementation of the func assumes that the format
of insecure registry should be `host:port` if not CIDR.
However, it is very common that user may incorrectly
provide a registry with a scheme (e.g, `http://myregistry.com:5000`)
Such a registry format with a scheme will cause docker pull to
always try https endpoint.
The reason is that the func of `isSecureIndex()` actually will
check for the map of the index server for `myregistry.com:5000`
while the insecure registry only has a record of `http://myregistry.com:5000`.
As a consequence, docker assumes that `myregistry.com:5000` is not
a insecure registry and will go ahead with https endpoint.
This fix addresses the issue by error out insecure registries with scheme.
A unit test has been added.
This fix is related to 29936.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
All images in the default registry (AKA docker.io, index.docker.io, and
registry-1.docker.io) are available via the v2 protocol, so there's no
reason to use the v1 protocol. Disabling it prevents useless fallbacks.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This fixes the hard coded restriction for non-linux platforms to v2 registries. Previously, the check was above the flag parsing, which would overwrite the hard coded value and prevent correct operation. This change also removes the related daemon flag from Windows to avoid confusion, as it has no meaning when the value is going to always be hard coded to true.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Going forward, Docker won't use a different default registry on Windows.
This changes Windows to use the standard Docker Hub registry as the
default registry.
There is a plan in place to migrate existing images from the Windows
registry to Hub's normal registry, in advance of the 1.11 release. In
the mean time, images on the Windows registry can be accessed by
prefixing them with `registry-win-tp3.docker.io/`.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Further differentiate the APIEndpoint used with V2 with the endpoint type which is only used for v1 registry interactions
Rename Endpoint to V1Endpoint and remove version ambiguity
Use distribution token handler for login
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This allows easier URL handling in code that uses APIEndpoint.
If we continued to store the URL unparsed, it would require redundant
parsing whenver we want to extract information from it. Also, parsing
the URL earlier should give improve validation.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
This updates the vendored docker/distribution to the current master
branch.
Note the following changes:
- The manifest package was split into manifest/schema1. Most references
to the manifest package in the engine needed to be updated to use
schema1 instead.
- Validation functions in api/v2 were replaced by the
distribution/reference package. The engine code has been updated to
use the reference package for validation where necessary. A future PR
will change the engine to use the types defined in
distribution/reference more comprehensively.
- The reference package explicitly allows double _ characters in
repository names. registry_test.go was updated for this.
- TestPullFailsWithAlteredManifest was corrupting the manifest JSON, now
that the schema1 package unmarshals the correct payload. The test is
being changed to modify the JSON without affecting its length, which
allows the pull to succeed to the point where digest validation
happens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Search terms shouldn't be restricted to only full valid repository
names. It should be perfectly valid to search using a part of a name,
even if it ends with a period, dash or underscore.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Add a daemon flag to control this behaviour. Add a warning message when pulling
an image from a v1 registry. The default order of pull is slightly altered
with this changset.
Previously it was:
https v2, https v1, http v2, http v1
now it is:
https v2, http v2, https v1, http v1
Prevent login to v1 registries by explicitly setting the version before ping to
prevent fallback to v1.
Add unit tests for v2 only mode. Create a mock server that can register
handlers for various endpoints. Assert no v1 endpoints are hit with legacy
registries disabled for the following commands: pull, push, build, run and
login. Assert the opposite when legacy registries are not disabled.
Signed-off-by: Richard Scothern <richard.scothern@gmail.com>
Add a trusted flag to force the cli to resolve a tag into a digest via the notary trust library and pull by digest.
On push the flag the trust flag will indicate the digest and size of a manifest should be signed and push to a notary server.
If a tag is given, the cli will resolve the tag into a digest and pull by digest.
After pulling, if a tag is given the cli makes a request to tag the image.
Use certificate directory for notary requests
Read certificates using same logic used by daemon for registry requests.
Catch JSON syntax errors from Notary client
When an uncaught error occurs in Notary it may show up in Docker as a JSON syntax error, causing a confusing error message to the user.
Provide a generic error when a JSON syntax error occurs.
Catch expiration errors and wrap in additional context.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
* Add godoc documentation where it was missing
* Change identifier names that don't match Go style, such as INDEX_NAME
* Rename RegistryInfo to PingResult, which more accurately describes
what this structure is for. It also has the benefit of making the name
not stutter if used outside the package.
Updates #14756
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
Currently canonical name gets set to the local name and displayed in the errors.
Canonical name should be the unique and canonical name for an image.
Use docker.io as the canonical domain for images on the public registry.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
