The field will still be present in the response, but will always be
`false`.
Searching for `is-automated=true` will yield no results, while
`is-automated=false` will effectively be a no-op.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Don't change the behavior for older clients and keep the same behavior.
Otherwise client can't opt-out (because `ReadOnlyNonRecursive` is
unsupported before 1.44).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Replace regex matching/replacement and re-reading of generated files
with a simple parser, and struct to remember and manipulate the file
content.
Annotate the generated file with a header comment saying the file is
generated, but can be modified, and a trailing comment describing how
the file was generated and listing external nameservers.
Always start with the host's resolv.conf file, whether generating config
for host networking, or with/without an internal resolver - rather than
editing a file previously generated for a different use-case.
Resolves an issue where rewrites of the generated file resulted in
default IPv6 nameservers being unnecessarily added to the config.
Signed-off-by: Rob Murray <rob.murray@docker.com>
API v1.20 (Docker Engine v1.11.0) and older allowed a HostConfig to be passed
when starting a container. This feature was deprecated in API v1.21 (Docker
Engine v1.10.0) in 3e7405aea8, and removed in
API v1.23 (Docker Engine v1.12.0) in commit 0a8386c8be.
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 322e2a7d05 changed the format of errors
returned by the API to be in JSON format for API v1.24. Older versions of
the API returned errors in plain-text format.
API v1.23 and older are deprecated, so we can remove support for plain-text
error responses.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This endpoint was deprecated in API v1.20 (Docker Engine v1.8.0) in
commit db9cc91a9e, in favor of the
`PUT /containers/{id}/archive` and `HEAD /containers/{id}/archive`
endpoints, and disabled in API v1.24 (Docker Engine v1.12.0) through
commit 428328908d.
This patch removes the endpoint, and the associated `daemon.ContainerCopy`
method in the backend.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.21 (Docker Engine v1.9.0) enforces the request to have a JSON
content-type on exec start (see 45dc57f229).
An exception was added in 0b5e628e14 to
make this check conditional (supporting API < 1.21).
API v1.23 and older are deprecated, and this patch removes the feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.20 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The TestInspectAPIContainerResponse mentioned that Windows does not
support API versions before v1.25.
While technically, no stable release existed for Windows with API versions
before that (see f811d5b128), API version
v1.24 was enabled in e4af39aeb3, to have
a consistend fallback version for API version negotiation.
This patch updates the test to reflect that change.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.19 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API versions before 1.19 allowed CpuShares that were greater than the maximum
or less than the minimum supported by the kernel, and relied on the kernel to
do the right thing.
Commit ed39fbeb2a introduced code to adjust the
CPU shares to be within the accepted range when using API version 1.18 or
lower.
API v1.23 and older are deprecated, so we can remove support for this
functionality.
Currently, there's no validation for CPU shares to be within an acceptable
range; a TODO was added to add validation for this option, and to use the
`linuxMinCPUShares` and `linuxMaxCPUShares` consts for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also fixes some potentially unclosed file-handles,
inlines some variables, and use consts for fixed
values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in f301c5765a to test
inspect output for API > v1.21, however, it was pinned to API v1.21,
which is now deprecated.
Remove the fixed version, as the intent was to test "current" API versions
(API v1.21 and up),
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in f301c5765a to test
inspect output for API > v1.21, however, it was pinned to API v1.21,
which is now deprecated.
Remove the fixed version, as the intent was to test "current" API versions
(API v1.21 and up),
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in 75f6929b44, but pinned
to the API version that was current at the time (v1.20), which is now
deprecated.
Update the test to use the current API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We have many "image" packages, so these vars easily conflict/shadow
imports. Let's rename them (and in some cases use a const) to
prevent that.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Message is different with containerd backend. The Linux test
`TestPullLinuxImageFailsOnLinux` was adjusted before, but we missed this
one.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
In order for the cache in the classic builder to work we need to:
- use the came comparison function as the graph drivers implementation
- save the container config when commiting the image
- use all images to search a 'FROM "scratch"' image
- load all images if `cacheFrom` is empty
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This hopefully makes the test less flakey (or removes any flake that
would be caused by the test itself).
1. Adds tail of cluster daemon logs when there is a test failure so we
can more easily see what may be happening
2. Scans the daemon logs to check if the key is rotated before
restarting the daemon. This is a little hacky but a little better
than assuming it is done after a hard-coded 3 seconds.
3. Cleans up the `node ls` check such that it uses a poll function
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
When mapping a port with the userland-proxy enabled, the daemon would
perform an "exec.LookPath" for every mapped port (which, in case of
a range of ports, would be for every port in the range).
This was both inefficient (looking up the binary for each port), inconsistent
(when running in rootless-mode, the binary was looked-up once), as well as
inconvenient, because a missing binary, or a mis-configureed userland-proxy-path
would not be detected daeemon startup, and not produce an error until starting
the container;
docker run -d -P nginx:alpine
4f7b6589a1680f883d98d03db12203973387f9061e7a963331776170e4414194
docker: Error response from daemon: driver failed programming external connectivity on endpoint romantic_wiles (7cfdc361821f75cbc665564cf49856cf216a5b09046d3c22d5b9988836ee088d): fork/exec docker-proxy: no such file or directory.
However, the container would still be created (but invalid);
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
869f41d7e94f nginx:alpine "/docker-entrypoint.…" 10 seconds ago Created romantic_wiles
This patch changes how the userland-proxy is configured;
- The path of the userland-proxy is now looked up / configured at daemon
startup; this is similar to how the proxy is configured in rootless-mode.
- A warning is logged when failing to lookup the binary.
- If the daemon is configured with "userland-proxy" enabled, an error is
produced, and the daemon will refuse to start.
- The "proxyPath" argument for newProxyCommand() (in libnetwork/portmapper)
is now required to be set. It no longer looks up the executable, and
produces an error if no path was provided. While this change was not
required, it makes the daemon config the canonical source of truth, instead
of logic spread accross multiplee locations.
Some of this logic is a change of behavior, but these changes were made with
the assumption that we don't want to support;
- installing the userland proxy _after_ the daemon was started
- moving the userland proxy (or installing a proxy with a higher
preference in PATH)
With this patch:
Validating the config produces an error if the binary is not found:
dockerd --validate
WARN[2023-12-29T11:36:39.748699591Z] failed to lookup default userland-proxy binary error="exec: \"docker-proxy\": executable file not found in $PATH"
userland-proxy is enabled, but userland-proxy-path is not set
Disabling userland-proxy prints a warning, but validates as "OK":
dockerd --userland-proxy=false --validate
WARN[2023-12-29T11:38:30.752523879Z] ffailed to lookup default userland-proxy binary error="exec: \"docker-proxy\": executable file not found in $PATH"
configuration OK
Speficying a non-absolute path produces an error:
dockerd --userland-proxy-path=docker-proxy --validate
invalid userland-proxy-path: must be an absolute path: docker-proxy
Befor this patch, we would not validate this path, which would allow the daemon
to start, but fail to map a port;
docker run -d -P nginx:alpine
4f7b6589a1680f883d98d03db12203973387f9061e7a963331776170e4414194
docker: Error response from daemon: driver failed programming external connectivity on endpoint romantic_wiles (7cfdc361821f75cbc665564cf49856cf216a5b09046d3c22d5b9988836ee088d): fork/exec docker-proxy: no such file or directory.
Specifying an invalid userland-proxy-path produces an error as well:
dockerd --userland-proxy-path=/usr/local/bin/no-such-binary --validate
userland-proxy-path is invalid: stat /usr/local/bin/no-such-binary: no such file or directory
mkdir -p /usr/local/bin/not-a-file
dockerd --userland-proxy-path=/usr/local/bin/not-a-file --validate
userland-proxy-path is invalid: exec: "/usr/local/bin/not-a-file": is a directory
touch /usr/local/bin/not-an-executable
dockerd --userland-proxy-path=/usr/local/bin/not-an-executable --validate
userland-proxy-path is invalid: exec: "/usr/local/bin/not-an-executable": permission denied
Same when using the daemon.json config-file;
echo '{"userland-proxy-path":"no-such-binary"}' > /etc/docker/daemon.json
dockerd --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json: merged configuration validation from file and command line flags failed: invalid userland-proxy-path: must be an absolute path: no-such-binary
dockerd --userland-proxy-path=hello --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json: the following directives are specified both as a flag and in the configuration file: userland-proxy-path: (from flag: hello, from file: /usr/local/bin/docker-proxy)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Config serialization performed by the graphdriver implementation
maintained the distinction between an empty array and having no Cmd set.
With containerd integration we serialize the OCI types directly that use
the `omitempty` option which doesn't persist that distinction.
Considering that both values should have exactly the same semantics (no
cmd being passed) it should be fine if in this case the Cmd would be
null instead of an empty array.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Rewrite `.build-empty-images` shell script that produced special images
(emptyfs with no layers, and empty danglign image) to a Go functions
that construct the same archives in a temporary directory.
Use them to load these images on demand only in the tests that need
them.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This removes various skips that accounted for running the integration tests
against older versions of the daemon before 20.10 (API version v1.41). Those
versions are EOL, and we don't run tests against them.
This reverts most of e440831802, and similar
PRs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the minimum API version as advertised by the test-daemon, instead of the
hard-coded API version from code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 59b83d8aae containerized these steps,
as they didn't work well on Debian Jessie:
> Because the `mount` here will sometimes fail when run in `debian:jessie`,
> which is what the environrment hosting the test suite is running if run
> from the `Makefile`.
> Also, why the heck not containerize it, all the things.
Follow-up commits, such as 228d74842f, and
1c5806cf57 updated the Debian distro, but
also updated this comment, losing the original context (the issue was
(originally) related to Debian Jessie).
This patch changes the test back to not use containers, which seems to
work fine (at least "it worked on my machine").
make TEST_IGNORE_CGROUP_CHECK=1 TEST_FILTER=TestDaemonNoSpaceLeftOnDeviceError DOCKER_GRAPHDRIVER=overlay2 test-integration
=== RUN TestDockerDaemonSuite/TestDaemonNoSpaceLeftOnDeviceError
check_test.go:589: [df36ad96a412b] daemon is not started
--- PASS: TestDockerDaemonSuite (5.12s)
--- PASS: TestDockerDaemonSuite/TestDaemonNoSpaceLeftOnDeviceError (5.12s)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Skip TestListDanglingImagesWithDigests which tests graphdriver
implementation specific behavior of `docker images --filter
dangling=true`.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The auth service error response is not a part of the spec and containerd
doesn't parse it like the Docker's distribution does.
Check for containerd specific errors instead.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Debian Woodworm ships with a newer version of iptables, which caused two
tests to fail:
=== FAIL: amd64.integration-cli TestDockerDaemonSuite/TestDaemonICCLinkExpose (1.18s)
docker_cli_daemon_test.go:841: assertion failed: false (matched bool) != true (true bool): iptables output should have contained "DROP.*all.*ext-bridge6.*ext-bridge6", but was "Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)\n pkts bytes target prot opt in out source destination \n 0 0 DOCKER-USER 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 DOCKER-ISOLATION-STAGE-1 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- * ext-bridge6 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED\n 0 0 DOCKER 0 -- * ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- ext-bridge6 !ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n 0 0 DROP 0 -- ext-bridge6 ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n"
--- FAIL: TestDockerDaemonSuite/TestDaemonICCLinkExpose (1.18s)
=== FAIL: amd64.integration-cli TestDockerDaemonSuite/TestDaemonICCPing (1.19s)
docker_cli_daemon_test.go:803: assertion failed: false (matched bool) != true (true bool): iptables output should have contained "DROP.*all.*ext-bridge5.*ext-bridge5", but was "Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)\n pkts bytes target prot opt in out source destination \n 0 0 DOCKER-USER 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 DOCKER-ISOLATION-STAGE-1 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- * ext-bridge5 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED\n 0 0 DOCKER 0 -- * ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- ext-bridge5 !ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n 0 0 DROP 0 -- ext-bridge5 ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n"
--- FAIL: TestDockerDaemonSuite/TestDaemonICCPing (1.19s)
Both the `TestDaemonICCPing`, and `TestDaemonICCLinkExpose` test were introduced
in dd0666e64f. These tests called `iptables` with
the `-n` (`--numeric`) option, which prevents it from doing a reverse-DNS lookup
as an optimization.
However, the `-n` option did not have an effect to the `prot` column before
commit [da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa] (iptables < v1.8.9 or v1.8.8).
Newer versions, such as the iptables version shipping with Debian Woodworm do,
so we need to update the expected output for this version.
This patch removes the `-n` option, to keep the test more portable, also when
run non-containerized, and removes the use of regular expressions to check the
result, as these regular expressions were quite permissive (using `.*` wild-
card matching). Instead, we're getting the
With this change;
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER=TestDaemonICC TEST_IGNORE_CGROUP_CHECK=1 test-integration
...
--- PASS: TestDockerDaemonSuite (139.11s)
--- PASS: TestDockerDaemonSuite/TestDaemonICCLinkExpose (54.62s)
--- PASS: TestDockerDaemonSuite/TestDaemonICCPing (84.48s)
[da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa]: https://git.netfilter.org/iptables/commit/?id=da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Change the repo name used as for an intermediate image so it doesn't
try to mount from the image pushed by `TestBuildMultiStageImplicitPull`.
Before this patch, this test failed because the distribution.source
labels are not cleared between tests and the busybox content still has
the distribution.source label pointing to the `dockercli/testf`
repository which is no longer present in the test registry.
So both `dockercli/busybox` and `dockercli/testf` are equally valid
mount candidates for `dockercli/crossrepopush` and containerd algorithm
just happens to select the last one.
This changes the repo name to not have the common repository component
(`dockercli`) with the `dockercli/testf` repository.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
