We were not really using these, and they haven't been
updated in a long time. If needed, we can add people to
the CODEOWNERS file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Use rc_ulimit for ulimit constraints
* Synchronize ulimit settings to systemd's
* Add support for reload command
* Add support for retry settings for docker stop/restart
Signed-off-by: Manuel Rüger <manuel@rueg.eu>
PartOf deactivates the socket whenever the service get deactivated. The socket unit however should be active nevertheless.
Signed-off-by: Max Harmathy <max.harmathy@web.de>
In the event that the docker daemon is managed by systemd and spontaneously
dies the default service configuration does not have docker restart. For people
who just want to install and start docker then never worry about whether docker
is running a better default may be to restart the service on a failure.
Signed-off-by: Ryan Abrams <rdabrams@gmail.com>
In case when docker was not running init script stop was returning value <> 0.
Due to this fact it was impossible to uninstall the docker-engine if the docker service was stopped.
Signed-off-by: Cyprian Gracz <cyprian.gracz@micro-jumbo.eu>
Fixed message logging
Signed-off-by: Cyprian Gracz <cyprian.gracz@micro-jumbo.eu>
TMPDIR was changed to DOCKER_TMPDIR in pull request 7113 but the file still asks user to set TMPDIR.
I am new to docker and wasted sometime this morning because of this.
I am using docker version 1.12.1 on ubuntu server 14.04
Signed-off-by: Neyazul Haque <nuhaque@gmail.com>
added the firewalld.service symbol in the After line docker
will always start after firewalld, thus eliminating the issue
of firewall blocking all mapped traffic.
Signed-off-by: Ramon Brooker <Ramon.Brooker@imaginecommunications.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#23981
The selinux issue we are seeing in the report is related to the socket
file for docker and nothing else. By removing the socket docker starts
up correctly.
However, there is another motivation for removing socket activation from
docker's systemd files and that is because when you have daemons running
with --restart always whenever you have a host reboot those daemons
will not be started again because the docker daemon is not started by
systemd until a request comes into the docker API.
Leave it for deb based systems because everything is working correctly
for both socket activation and starting normally at boot.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
(and set $exec to dockerd instead)
This ensures end users do not need to make any configuration changes
due to the rename from docker to dockerd in version 1.12.
Signed-off-by: Paul Furtado <pfurtado@hubspot.com>
There is a not-insignificant performance overhead for all containers (if
containerd is a child of Docker, which is the current setup) if rlimits are
set on the main Docker daemon process (because the limits
propogate to all children).
We recommend using cgroups to do container-local accounting.
This applies the change added in 8db61095a3
to other init scripts.
Note that nfile cannot be set to unlimited, and the limit
is hardcoded to 1048576 (2^20) , see:
http://stackoverflow.com/a/1213069/1811501
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There is a not-insignificant performance overhead for all containers (if
containerd is a child of Docker, which is the current setup) if systemd
sets rlimits on the main Docker daemon process (because the limits
propogate to all children).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Change the kill mode to process so that systemd does not kill container
processes when the daemon is shutdown but only the docker daemon
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This adds support for reloading the docker daemon
(SIGHIUP) so that changes in '/etc/docker/daemon.json'
can be loaded at runtime by reloading the service
through systemd ('systemctl reload docker')
Before this change, systemd would output an error
that "reloading" is not supported for the docker
service;
systemctl reload docker
Failed to reload docker.service: Job type reload is not applicable for unit docker.service.
After this change, the docker daemon can be reloaded
through 'systemctl reload docker', which reloads
the configuration;
journalctl -f -u docker.service
May 02 03:49:20 testing systemd[1]: Reloading Docker Application Container Engine.
May 02 03:49:20 testing docker[28496]: time="2016-05-02T03:49:20.143964103-04:00" level=info msg="Got signal to reload configuration, reloading from: /etc/docker/daemon.json"
May 02 03:49:20 testing systemd[1]: Reloaded Docker Application Container Engine.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We need to add delegate yes to docker's service file so that it can
manage the cgroups of the processes that it launches without systemd
interfering with them and moving the processes after it is reloaded.
```
Delegate=
Turns on delegation of further resource control partitioning to
processes of the unit. For unprivileged services (i.e. those
using the User= setting), this allows processes to create a
subhierarchy beneath its control group path. For privileged
services and scopes, this ensures the processes will have all
control group controllers enabled.
```
This is the proper fix for issue #20152
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Previously, this check only worked if no host was specified and was
hard coded to check for "/var/run/docker.sock"
This change generalizes that check and captures any specified socket
and waits for it to be created.
Caveat: This will only check the first socket specified, but it is an
improvement over none at all.
Fixes#185160
Signed-off-by: Andrew Guenther <guenther.andrew.j@gmail.com>
systemd sets an additional limit on processes and threads that defaults to 512 when run under Linux >= 4.3.
See more information here: http://unix.stackexchange.com/a/255603/59955
Signed-off-by: Candid Dauth <cdauth@cdauth.eu>
With content addressability update starting upgraded
daemon for the first time can take a long time if
graph dir was not prepared with a migration tool before.
This avoids systemd timeouts while the migration is
taking place.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Add 10 seconds timeout when running `sudo service docker stop`. This is
especially needed when running `sudo service docker restart`. Otherwise,
`restart` results in exitstatus 1, because `start` has nothing to do.
Signed-off-by: Ewa Czechowska <ewa@ai-traders.com>
On boot, the init script is invoked from `/etc/rcN.d/S20docker` (where N
is the runlevel). Consequently, the init script tried to find the
defaults at `/etc/defaults/S20docker` and the binary at
`/usr/bin/S20docker`. This causes the docker daemon to fail at boot with
the error
/usr/bin/S20docker not present or not executable
Starting it manually works because it invokes `/etc/init.d/docker` which
has the correct basename.
Fix this by hardcoding "docker" as the base name.
Signed-off-by: Matthias Rampke <mr@soundcloud.com>
The shebang for OpenRC init scripts is now #!/sbin/openrc-run, and we
can also use the default start and stop functions built into OpenRC.
Signed-off-by: William Hubbs <w.d.hubbs@gmail.com>
The docker script in contrib/init/sysvinit-redhat will fail silently on
a start if Docker is not installed in the default /usr/bin/ location.
While a non-zero exit code is returned the user will receive no visible
indication (i.e. error message) as to why Docker was not started.
This commit changes the logic so that in the case that the docker
executable is not found in the expected location or the user does not
have execute permissions on the executable appropriate error messages
are now shown to the user as well as exiting with a non-zero exit code
Signed-off-by: Rob Vesse <rvesse@dotnetrdf.org>
Currently the service type is 'simple', the default, meaning that
docker.service is considered to be started straight after
spawning. This is incorrect as there is significant amount of time
between spawning and docker ready to accept connections on the passed
sockets. Docker does implement systemd socket activate and
notification protocol, and send the ready signal to systemd, once it
is ready. However for systemd to take those notifications into
account, the service file type should be set to notify.
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
If you have some kind of bogus `other_args` in `/etc/sysconfig/docker` the start script will report "started" but it's full of lies. This enhances the flow so that if the pidfile never shows up (failure to start) you get a proper failure message.
I also added dots for fun.
Signed-off-by: Jeff Minard <jeff.minard@creditkarma.com>
