I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Interacting with v1 registries was deprecated in Docker 1.8.3, disabled by default
in Docker 17.06, and scheduled for removal in Docker 17.12.
This patch disallows enabling V1 registry through the `--disable-legacy-registry`
option, and the `"disable-legacy-registry": false` option in the daemon configuration
file. The actual V1 registry code is still in place, and will be removed separately.
With this patch applied:
$ dockerd --disable-legacy-registry=false
ERROR: The '--disable-legacy-registry' flag has been removed. Interacting with legacy (v1) registries is no longer supported
Or, when setting through the `daemon.json` configuration file
$ mkdir -p /etc/docker/
$ echo '{"disable-legacy-registry":false}' > /etc/docker/daemon.json
$ dockerd
ERROR: The 'disable-legacy-registry' configuration option has been removed. Interacting with legacy (v1) registries is no longer supported
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test tries to pull all the tags in the busybox repo and looks to see
if there were more than two images pulled. This was failing on
p/z due to the recent change to manifest lists, where one of the busybox
tags didn't have a p/z manifest in it's manifest list.
This error seems fine to me, so I changed the test to see if pull fails,
it fails with the "manifest not found" error.
Also switched from busybox -> alpine, because it has significantly less tags,
and the images are close in size.
Signed-off-by: Christopher Jones <tophj@linux.vnet.ibm.com>
Deprecation of interacting with v1 registries was
started in docker 1.8.3, which added a `--disable-legacy-registry`
flag.
This option was anounced to be the default starting
with docker 17.06, and v1 registries completely
removed in docker 17.12.
This patch updates the default, and disables
interaction with v1 registres by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `digest` data type, used throughout docker for image verification
and identity, has been broken out into `opencontainers/go-digest`. This
PR updates the dependencies and moves uses over to the new type.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Translate pull errors to provide a more consistent and user friendly
error message.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
The current error message is "Error: image [name] not found". This makes
sense from the perspective of the v1 pull, since we found the repository
doesn't exist over the v1 protocol. However, in the vast majority of
cases, this error will be produced by fallback situations, where we
first try to pull the tag with the v2 protocol, and then fall back the
v1 protocol, which probably isn't even supported by the server.
Including the tag in the error message makes a lot more sense since the
actual repository may exist on v2, but not the tag.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- cherry-pick from 1.10.3 branch: 0186f4d422
- add token service test suite
- add integration test (missing in 1.10.3 branch)
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
- add test for pull from private registry with no credentials
- add test for push to docker hub with no credentials
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Signed-off-by: Antonio Murdaca <amurdaca@localhost.localdomain>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
This PR fix the DockerHubPullSuite.TestPullNonExistingImage test
in #19425. The majority of the execution time in this test is
from multiple executions of 'docker pull', each of which takes
more than one second even though it tries to pull a non-existing
image.
Without changing the behavior of the 'docker pull' itself, this
fix tries to execute the 'docker pull' command in parallel in
order to speed up the execution of the overall test.
Since each 'docker pull' is independent, executions in parallel
should not alter the purpose of the test.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Retries after v1 fallbacks were added in #20411. The test still appears
to be flaky. There are two potential problems. The initial pull was not
protected against pulling from v1, so it could be giving us a different
hello-world image to compare against. Also, after experiencing a v1
fallback, we need to restore the original image before doing the next
pull, because otherwise the "Image is up to date for hello-world:latest"
message will not show up as expected.
See #17214.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Sometimes transient network issues will cause
TestPullFromCentralRegistryImplicitRefParts to end up pulling with the
v1 protocol. This violates the assumptions behind the test. To make the
test more robust, allow a few retries if any pull ends up using the v1
protocol.
Fixes#17214
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Revert the portions of #17617 that report all errors when a pull
falls back, and go back to just reporting the last error. This was nice
to have, but causes some UX issues because nonexistent images show
additional "unauthorized" errors.
Keep the part of the PR that handled ENOSPC, as this appears to work
even without tracking multiple errors.
Fixes#19419
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This is a followup to #18839. That PR relaxed the fallback logic so that
if a manifest doesn't exist on v2, or the user is unauthorized to access
it, we try again with the v1 protocol. A similar special case is needed
for "pull all tags" (docker pull -a). If the v2 registry doesn't
recognize the repository, or doesn't allow the user to access it, we
should fall back to v1 and try to pull all tags from the v1 registry.
Conversely, if the v2 registry does allow us to list the tags, there
should be no fallback, even if there are errors pulling those tags.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
PR #18590 caused compatibility issues with registries such as gcr.io
which support both the v1 and v2 protocols, but do not provide the same
set of images over both protocols. After #18590, pulls from these
registries would never use the v1 protocol, because of the
Docker-Distribution-Api-Version header indicating that v2 was supported.
Fix the problem by making an exception for the case where a manifest is
not found. This should allow fallback to v1 in case that image is
exposed over the v1 protocol but not the v2 protocol.
This avoids the overly aggressive fallback behavior before #18590 which
would allow protocol fallback after almost any error, but restores
interoperability with mixed v1/v2 registry setups.
Fixes#18832
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
If we detect a Docker-Distribution-Api-Version header indicating that
the registry speaks the V2 protocol, no fallback to V1 should take
place.
The same applies if a V2 registry operation succeeds while attempting a
push or pull.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a transfer manager which deduplicates and schedules
transfers, and also an upload manager and download manager that build on
top of the transfer manager to provide high-level interfaces for uploads
and downloads. The push and pull code is modified to use these building
blocks.
Some benefits of the changes:
- Simplification of push/pull code
- Pushes can upload layers concurrently
- Failed downloads and uploads are retried after backoff delays
- Cancellation is supported, but individual transfers will only be
cancelled if all pushes or pulls using them are cancelled.
- The distribution code is decoupled from Docker Engine packages and API
conventions (i.e. streamformatter), which will make it easier to split
out.
This commit also includes unit tests for the new distribution/xfer
package. The tests cover 87.8% of the statements in the package.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This test was directly comparing lines of output from "docker images".
Sometimes, when busybox had been pushed to the hub recently, the
relative creation times would differ like this:
... obtained []string = []string{"busybox", "latest", "d9551b4026f0", "27", "minutes", "ago", "1.113", "MB"}
... expected []string = []string{"busybox", "latest", "d9551b4026f0", "26", "minutes", "ago", "1.113", "MB"}
Fixing by removing the time-since-creation fields from the comparison.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Add distribution package for managing pulls and pushes. This is based on
the old code in the graph package, with major changes to work with the
new image/layer model.
Add v1 migration code.
Update registry, api/*, and daemon packages to use the reference
package's types where applicable.
Update daemon package to use image/layer/tag stores instead of the graph
package
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
- utils_test.go and docker_utils_test.go
- Moved docker related function to docker_utils.go
- add a test for integration-cli/checker
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Update and migrate existing tests to the `DockerHubPullSuite`. Most
tests were preserved, but refactored and made more exhaustive. One test
was deliberately removed (`TestPullVerified`) as it is unreliable and
that the feature was obsoleted by content trust.
Move all trust related tests to `docker_cli_pull_trusted_test.go`.
Move tests depending on a local registry to `docker_cli_pull_local_test.go`.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Currently some notary tests change the system clock to check for expiration.
Skip these tests until the code can be refactored to not rely on updating the system clock.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
Update help line to allow 90 characters instead of 80
The trust flag pushes out the help description column wider, requiring more room to display help messages.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
