While the field in the Go struct is named `NanoCPUs`, it has a JSON label to
use `NanoCpus`, which was added in the original pull request (not clear what
the reason was); 846baf1fd3
Some notes:
- Golang processes field names case-insensitive, so when *using* the API,
both cases should work, but when inspecting a container, the field is
returned as `NanoCpus`.
- This only affects Containers.Resources. The `Limits` and `Reservation`
for SwarmKit services and SwarmKit "nodes" do not override the name
for JSON, so have the canonical (`NanoCPUs`) casing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes a regression based on expectations of the runtime:
```
docker pull arm32v7/alpine
docker run arm32v7/alpine
```
Without this change, the `docker run` will fail due to platform
matching on non-arm32v7 systems, even though the image could run
(assuming the system is setup correctly).
This also emits a warning to make sure that the user is aware that a
platform that does not match the default platform of the system is being
run, for the cases like:
```
docker pull --platform armhf busybox
docker run busybox
```
Not typically an issue if the requests are done together like that, but
if the image was already there and someone did `docker run` without an
explicit `--platform`, they may very well be expecting to run a native
version of the image instead of the armhf one.
This warning does add some extra noise in the case of platform specific
images being run, such as `arm32v7/alpine`, but this can be supressed by
explicitly setting the platform.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Current description of the "v" option doesn't explain what happens to
the volumes that are still in use by other containers. Turns out that
the only volumes that are removed are unnamed ones[1].
Perhaps a good way of clarifying this behavior would be adapting the
description from "docker rm --help".
As for the docs/api/v1.*.yaml changes — they seem to be applicable,
since the origin of this behavior dates way back to the 2016 or v1.11[2].
[1]: a24a71c50f/daemon/mounts.go (L34-L38)
[2]: dd7d1c8a02
Signed-off-by: Nikolay Edigaryev <edigaryev@gmail.com>
These types were not used in the API, so could not come up with
a reason why they were in that package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add Ulimits field to the ContainerSpec API type and wire it to Swarmkit.
This is related to #40639.
Signed-off-by: Albin Kerouanton <albin@akerouanton.name>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After dicussing with maintainers, it was decided putting the burden of
providing the full cap list on the client is not a good design.
Instead we decided to follow along with the container API and use cap
add/drop.
This brings in the changes already merged into swarmkit.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Kernel memory limit is not supported on cgroup v2.
Even on cgroup v1, kernel memory limit (`kmem.limit_in_bytes`) has been deprecated since kernel 5.4.
0158115f70
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
In dockerd we already have a concept of a "runtime", which specifies the
OCI runtime to use (e.g. runc).
This PR extends that config to add containerd shim configuration.
This option is only exposed within the daemon itself (cannot be
configured in daemon.json).
This is due to issues in supporting unknown shims which will require
more design work.
What this change allows us to do is keep all the runtime config in one
place.
So the default "runc" runtime will just have it's already existing shim
config codified within the runtime config alone.
I've also added 2 more "stock" runtimes which are basically runc+shimv1
and runc+shimv2.
These new runtime configurations are:
- io.containerd.runtime.v1.linux - runc + v1 shim using the V1 shim API
- io.containerd.runc.v2 - runc + shim v2
These names coincide with the actual names of the containerd shims.
This allows the user to essentially control what shim is going to be
used by either specifying these as a `--runtime` on container create or
by setting `--default-runtime` on the daemon.
For custom/user-specified runtimes, the default shim config (currently
shim v1) is used.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The initial implementation followed the Swarm API, where
PidsLimit is located in ContainerSpec. This is not the
desired place for this property, so moving the field to
TaskTemplate.Resources in our API.
A similar change should be made in the SwarmKit API (likely
keeping the old field for backward compatibility, because
it was merged some releases back)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This prevents projects that import only the api/types package from
also having to use the errdefs package (and because of that, containerd)
as a dependency.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This introduces A new type (`Limit`), which allows Limits
and "Reservations" to have different options, as it's not
possible to make "Reservations" for some kind of limits.
The `GenericResources` have been removed from the new type;
the API did not handle specifying `GenericResources` as a
_Limit_ (only as _Reservations_), and this field would
therefore always be empty (omitted) in the `Limits` case.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Support for PidsLimit was added to SwarmKit in docker/swarmkit/pull/2415,
but never exposed through the Docker remove API.
This patch exposes the feature in the repote API.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While the docker cli may be sending a "version" header, this header
is not part of the API, or at least should not determin what API
version is used.
This code was added in c0afd9c873, to
adjust the handling of requests when an older version of the API was
used, but because the code relied on the "version" header set by the
CLI, it didn't work with other clients (e.g. when using cURL to make
an API request).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
"Container's image" term is rather ambiguous: it can be both a name and an ID.
Looking at the sources[1], it's actually an image ID, so bring some clarity.
[1]: a6a47d1a49/daemon/inspect.go (L170)
Signed-off-by: Nikolay Edigaryev <edigaryev@gmail.com>
The following fields are unsupported:
* BlkioStats: all fields other than IoServiceBytesRecursive
* CPUStats: CPUUsage.PercpuUsage
* MemoryStats: MaxUsage and Failcnt
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Metrics collectors generally don't need the daemon to prime the stats
with something to compare since they already have something to compare
with.
Before this change, the API does 2 collection cycles (which takes
roughly 2s) in order to provide comparison for CPU usage over 1s. This
was primarily added so that `docker stats --no-stream` had something to
compare against.
Really the CLI should have just made a 2nd call and done the comparison
itself rather than forcing it on all API consumers.
That ship has long sailed, though.
With this change, clients can set an option to just pull a single stat,
which is *at least* a full second faster:
Old:
```
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=false > /dev/null
2>&1
real0m1.864s
user0m0.005s
sys0m0.007s
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=false > /dev/null
2>&1
real0m1.173s
user0m0.010s
sys0m0.006s
```
New:
```
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=true > /dev/null
2>&1
real0m0.680s
user0m0.008s
sys0m0.004s
time curl --unix-socket
/go/src/github.com/docker/docker/bundles/test-integration-shell/docker.sock
http://./containers/test/stats?stream=false\&one-shot=true > /dev/null
2>&1
real0m0.156s
user0m0.007s
sys0m0.007s
```
This fixes issues with downstreams ability to use the stats API to
collect metrics.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
