Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit ca5aab19b4)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Currently the API spec would allow `"443/tcp": [null]`, but what should
be allowed is `"443/tcp": null`
Signed-off-by: Dominic Tubach <dominic.tubach@to.com>
(cherry picked from commit 32b5d296ea)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch hard-codes support for NVIDIA GPUs.
In a future patch it should move out into its own Device Plugin.
Signed-off-by: Tibor Vass <tibor@docker.com>
Running a cluster in a two-manager configuration effectively *doubles*
the chance of loosing control over the cluster (compared to running
in a single-manager setup). Users may have the assumption that having
two managers provides fault tolerance, so it's best to warn them if
they're using this configuration.
This patch adds a warning to the `info` response if Swarm is configured
with two managers:
WARNING: Running Swarm in a two-manager configuration. This configuration provides
no fault tolerance, and poses a high risk to loose control over the cluster.
Refer to https://docs.docker.com/engine/swarm/admin_guide/ to configure the
Swarm for fault-tolerance.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility allows a client to convert an API response
back to a typed error; allowing the client to perform
different actions based on the type of error, without
having to resort to string-matching the error.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: John Howard <jhoward@microsoft.com>
Also fixes https://github.com/moby/moby/issues/22874
This commit is a pre-requisite to moving moby/moby on Windows to using
Containerd for its runtime.
The reason for this is that the interface between moby and containerd
for the runtime is an OCI spec which must be unambigious.
It is the responsibility of the runtime (runhcs in the case of
containerd on Windows) to ensure that arguments are escaped prior
to calling into HCS and onwards to the Win32 CreateProcess call.
Previously, the builder was always escaping arguments which has
led to several bugs in moby. Because the local runtime in
libcontainerd had context of whether or not arguments were escaped,
it was possible to hack around in daemon/oci_windows.go with
knowledge of the context of the call (from builder or not).
With a remote runtime, this is not possible as there's rightly
no context of the caller passed across in the OCI spec. Put another
way, as I put above, the OCI spec must be unambigious.
The other previous limitation (which leads to various subtle bugs)
is that moby is coded entirely from a Linux-centric point of view.
Unfortunately, Windows != Linux. Windows CreateProcess uses a
command line, not an array of arguments. And it has very specific
rules about how to escape a command line. Some interesting reading
links about this are:
https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/https://stackoverflow.com/questions/31838469/how-do-i-convert-argv-to-lpcommandline-parameter-of-createprocesshttps://docs.microsoft.com/en-us/cpp/cpp/parsing-cpp-command-line-arguments?view=vs-2017
For this reason, the OCI spec has recently been updated to cater
for more natural syntax by including a CommandLine option in
Process.
What does this commit do?
Primary objective is to ensure that the built OCI spec is unambigious.
It changes the builder so that `ArgsEscaped` as commited in a
layer is only controlled by the use of CMD or ENTRYPOINT.
Subsequently, when calling in to create a container from the builder,
if follows a different path to both `docker run` and `docker create`
using the added `ContainerCreateIgnoreImagesArgsEscaped`. This allows
a RUN from the builder to control how to escape in the OCI spec.
It changes the builder so that when shell form is used for RUN,
CMD or ENTRYPOINT, it builds (for WCOW) a more natural command line
using the original as put by the user in the dockerfile, not
the parsed version as a set of args which loses fidelity.
This command line is put into args[0] and `ArgsEscaped` is set
to true for CMD or ENTRYPOINT. A RUN statement does not commit
`ArgsEscaped` to the commited layer regardless or whether shell
or exec form were used.
- Don't set `PidsLimit` when creating a container and
no limit was set (or the limit was set to "unlimited")
- Don't set `PidsLimit` if the host does not have pids-limit
support (previously "unlimited" was set).
- Do not generate a warning if the host does not have pids-limit
support, but pids-limit was set to unlimited (having no
limit set, or the limit set to "unlimited" is equivalent,
so no warning is nescessary in that case).
- When updating a container, convert `0`, and `-1` to
"unlimited" (`0`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This changes the default ipc mode of daemon/engine to be private,
meaning the containers will not have their /dev/shm bind-mounted
from the host by default. The benefits of doing this are:
1. No leaked mounts. Eliminate a possibility to leak mounts into
other namespaces (and therefore unfortunate errors like "Unable to
remove filesystem for <ID>: remove /var/lib/docker/containers/<ID>/shm:
device or resource busy").
2. Working checkpoint/restore. Make `docker checkpoint`
not lose the contents of `/dev/shm`, but save it to
the dump, and be restored back upon `docker start --checkpoint`
(currently it is lost -- while CRIU handles tmpfs mounts,
the "shareable" mount is seen as external to container,
and thus rightfully ignored).
3. Better security. Currently any container is opened to share
its /dev/shm with any other container.
Obviously, this change will break the following usage scenario:
$ docker run -d --name donor busybox top
$ docker run --rm -it --ipc container:donor busybox sh
Error response from daemon: linux spec namespaces: can't join IPC
of container <ID>: non-shareable IPC (hint: use IpcMode:shareable
for the donor container)
The soution, as hinted by the (amended) error message, is to
explicitly enable donor sharing by using --ipc shareable:
$ docker run -d --name donor --ipc shareable busybox top
Compatibility notes:
1. This only applies to containers created _after_ this change.
Existing containers are not affected and will work fine
as their ipc mode is stored in HostConfig.
2. Old backward compatible behavior ("shareable" containers
by default) can be enabled by either using
`--default-ipc-mode shareable` daemon command line option,
or by adding a `"default-ipc-mode": "shareable"`
line in `/etc/docker/daemon.json` configuration file.
3. If an older client (API < 1.40) is used, a "shareable" container
is created. A test to check that is added.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
There are two if statements checking for exactly same conditions:
> if hostConfig != nil && versions.LessThan(version, "1.40")
Merge these.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Like its counterpart in images and volumes, introduce the dangling
filter while listing networks. When the filter value is set to true,
only networks which aren't attached to containers and aren't builtin
networks are shown. When set to false, all builtin networks and
networks which are attached to containers are shown.
Signed-off-by: Karthik Nayak <Karthik.188@gmail.com>
Older API clients did not use a pointer for `PidsLimit`, so
API requests would always send `0`, resulting in any previous
value to be reset after an update:
Before this patch:
(using a 17.06 Docker CLI):
```bash
docker run -dit --name test --pids-limit=16 busybox
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container update --memory=100M --memory-swap=200M test
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
0
docker container exec test cat /sys/fs/cgroup/pids/pids.max
max
```
With this patch applied:
(using a 17.06 Docker CLI):
```bash
docker run -dit --name test --pids-limit=16 busybox
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container update --memory=100M --memory-swap=200M test
docker container inspect --format '{{json .HostConfig.PidsLimit}}' test
16
docker container exec test cat /sys/fs/cgroup/pids/pids.max
16
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Swarmkit api specifies a target for configs called called "Runtime"
which indicates that the config is not mounted into the container but
has some other use. This commit updates the Docker api to reflect this.
Signed-off-by: Drew Erny <drew.erny@docker.com>
This assists to address a regression where distribution errors were not properly
handled, resulting in a generic 500 (internal server error) to be returned for
`/distribution/name/json` if you weren't authenticated, whereas it should return
a 40x (401).
This patch attempts to extract the HTTP status-code that was returned by the
distribution code, and falls back to returning a 500 status if unable to match.
Before this change:
curl -v --unix-socket /var/run/docker.sock http://localhost/distribution/name/json
* Trying /var/run/docker.sock...
* Connected to localhost (/var/run/docker.sock) port 80 (#0)
> GET /distribution/name/json HTTP/1.1
> Host: localhost
> User-Agent: curl/7.52.1
> Accept: */*
>
< HTTP/1.1 500 Internal Server Error
< Api-Version: 1.37
< Content-Type: application/json
< Docker-Experimental: false
< Ostype: linux
< Server: Docker/dev (linux)
< Date: Tue, 03 Jul 2018 15:52:53 GMT
< Content-Length: 115
<
{"message":"errors:\ndenied: requested access to the resource is denied\nunauthorized: authentication required\n"}
* Curl_http_done: called premature == 0
* Connection #0 to host localhost left intact
daemon logs:
DEBU[2018-07-03T15:52:51.424950601Z] Calling GET /distribution/name/json
DEBU[2018-07-03T15:52:53.179895572Z] FIXME: Got an API for which error does not match any expected type!!!: errors:
denied: requested access to the resource is denied
unauthorized: authentication required
error_type=errcode.Errors module=api
ERRO[2018-07-03T15:52:53.179942783Z] Handler for GET /distribution/name/json returned error: errors:
denied: requested access to the resource is denied
unauthorized: authentication required
With this patch applied:
curl -v --unix-socket /var/run/docker.sock http://localhost/distribution/name/json
* Trying /var/run/docker.sock...
* Connected to localhost (/var/run/docker.sock) port 80 (#0)
> GET /distribution/name/json HTTP/1.1
> Host: localhost
> User-Agent: curl/7.52.1
> Accept: */*
>
< HTTP/1.1 403 Forbidden
< Api-Version: 1.38
< Content-Type: application/json
< Docker-Experimental: false
< Ostype: linux
< Server: Docker/dev (linux)
< Date: Fri, 03 Aug 2018 14:58:09 GMT
< Content-Length: 115
<
{"message":"errors:\ndenied: requested access to the resource is denied\nunauthorized: authentication required\n"}
* Curl_http_done: called premature == 0
* Connection #0 to host localhost left intact
daemon logs:
DEBU[2018-08-03T14:58:08.018726228Z] Calling GET /distribution/name/json
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
