Log drivers are instantiated on a per-container basis, and passed the
container ID (along with other information) when they're initialized.
Drivers that care about that value are caching the value that they're
passed when they're initialized and using it in favor of the value
contained in Message structures that are passed to them, so the field in
Messages is unused, so we remove it.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
device Base should not exists on failure:
--- FAIL: TestDevmapperCreateBase (0.06s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-079240530/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.00s)
graphtest_unix.go:219: devmapper: device Base already
exists.
it should be:
--- FAIL: TestDevmapperCreateBase (0.25s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Base/rootfs/a subdir:
no such file or directory
--- FAIL: TestDevmapperCreateSnap (0.13s)
graphtest_unix.go:122: stat
/tmp/docker-graphtest-828994195/devicemapper/mnt/Snap/rootfs/a subdir:
no such file or directory
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
Fixes#23031
If a profile is explicitly passed but the system is not built with seccomp support,
error out rather than just running without a profile at all as we would previously.
Behaviour is unchanged if no profile is specified or unconfined is specified.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
When a partial ID or name is used in `docker ps` filters, today the
entire list of containers is walked even though there are shorter paths
to acquiring the subset of containers that match the ID or name. Also,
container's locks are used during this walk, causing increased lock
contention on a busy daemon.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
This fix tries to fix build errors caused by updating
aws-sdk-go to v1.1.30.
This fix fixes#22961.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
1) docker create / run / start: this would create a snapshot device and mounts it onto the filesystem.
So the first time GET operation is called. it will create the rootfs directory and return the path to rootfs
2) Now when I do docker commit. It will call the GET operation second time. This time the refcount will check
that the count > 1 (count=2). so the rootfs already exists, it will just return the path to rootfs.
Earlier it was just returning the mp: /var/lib/docker/devicemapper/mnt/{ID} and hence the inconsistent paths error.
Signed-off-by: Shishir Mahajan <shishir.mahajan@redhat.com>
This fix tries to address the issue raised in #22420. When
`--tmpfs` is specified with `/tmp`, the default value is
`rw,nosuid,nodev,noexec,relatime,size=65536k`. When `--tmpfs`
is specified with `/tmp:rw`, then the value changed to
`rw,nosuid,nodev,noexec,relatime`.
The reason for such an inconsistency is because docker tries
to add `size=65536k` option only when user provides no option.
This fix tries to address this issue by always pre-progating
`size=65536k` along with `rw,nosuid,nodev,noexec,relatime`.
If user provides a different value (e.g., `size=8192k`), it
will override the `size=65536k` anyway since the combined
options will be parsed and merged to remove any duplicates.
Additional test cases have been added to cover the changes
in this fix.
This fix fixes#22420.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
SELinux labeling should be disabled when using --privileged mode
/etc/hosts, /etc/resolv.conf, /etc/hostname should not be relabeled if they
are volume mounted into the container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
A previous change added a TTY fixup for stdin on older Windows versions to
work around a Windows issue with backspace/delete behavior. This change
used the OS version to determine whether to activate the behavior.
However, the Windows bug is actually in the image, not the OS, so it
should have used the image's OS version.
This ensures that a Server TP5 container running on Windows 10 will have
reasonable console behavior.
Signed-off-by: John Starks <jostarks@microsoft.com>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the issue raised in #21976 and allows
the options of `--add-host` and `--net=host` to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in #21976 and allows
the options of `--dns`, `--dns-search`, `--dns-opt` and `--net=host`
to work at the same time.
The documentation has been updated and additional tests have been
added to cover this change.
This fix fixes#21976.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The mount check is now done by the FSChecker. This function is no longer needed and shouldn't be called.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
… and refactor a little bit some daemon on the way.
- Move `SearchRegistryForImages` to a new file (`daemon/search.go`) as
`daemon.go` is getting pretty big.
- `registry.Service` is now an interface (allowing us to decouple it a
little bit and thus unit test easily).
- Add some unit test for `SearchRegistryForImages`.
- Use UniqueExactMatch for search filters
- And use empty restore id for now in client.ContainerStart.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to cover the issue raised in #22463 by adding
filter for events emitted by docker daemon so that user could
utilize filter to receive events of interest.
Documentations have been updated for this fix.
Additional tests have been added to cover the changes in this fix.
This fix fixes#22463.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to cover the issue raised in #22463 by emitting
events for docker daemon so that user could be notified by
scenarios like config reload, etc.
This fix adds the `daemon reload`, and events for docker daemon.
Additional tests have been added to cover the changes in this fix.
This fix fixes#22463.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Check for the rootDir first because the mergeDir may not exist if root
is present.
Also fix unmounting in the defer to make sure it does not have a
refcount.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
For things that we can check if they are mounted by using their fsmagic
we should use that and for others do it the slow way.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This test is not applicable anymore now that containers are not stopped
when the daemon is restored.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Now supports setting a containers storage size when using zfs as the
storage engine. By passing in `--storage-opt size=<size>`, the created
container's storage size will be limited to the given size. Note that
the way zfs works, the given specified storage size will be given in
addition to the base container size.
Example:
The node image reports a size of `671M` from `df -h` when started.
Setting `--storage-opt size=2G` will result in a drive the size of
`671M` + `2G`, `2.7G` in total. Available space will be `2.0G`.
The storage size is achieved by setting the zfs option `quota` to the
given size on the zfs volume.
Signed-off-by: Ken Herner <kherner@progress.com>
Containers using the host network stack (--net=host)
are not affected by "ip-forwarding" being disabled,
so there's not need to show a warning.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This improves reliability by doing parsing of potentially untrusted data
in a separate process. It opens the door for further security improvements
if we can lock down the reexec-ed process. It also improves import
performance by only taking the backup and restore privileges once, for the
whole process.
Signed-off-by: John Starks <jostarks@microsoft.com>
This fix tries to address the issue raised in #22358 where syslog's
message tag always starts with `docker/` and can not be removed
by changing the log tag templates.
The issue is that syslog driver hardcodes `path.Base(os.Args[0])`
as the prefix, which is the binary file name of the daemon (`dockerd`).
This could be an issue for certain situations (e.g., #22358) where
user may prefer not to have a dedicated prefix in syslog messages.
There is no way to override this behavior in the current verison of
the docker.
This fix tries to address this issue without making changes in the
default behavior of the syslog driver. An additional
`{{.DaemonName}}` has been introduced in the syslog tag. This is
assigned as the `docker` when daemon starts. The default log tag
template has also been changed from
`path.Base(os.Args[0]) + "/{{.ID}}"` to `{{.DaemonName}}/{{.ID}}`.
Therefore, there is no behavior changes when log-tag is not provided.
In order to be consistent, the default log tag for fluentd has been
changed from `docker.{{.ID}}` to `{{DaemonName}}.{{.ID}}` as well.
The documentation for log-tag has been updated to reflect this change.
Additional test cases have been added to cover changes in this fix.
This fix fixes#22358.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Removing the call to Shutdown from within Signal in order to rely on waitExit handling the exit of the process.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
This fix tries to address issues raised in #20936 and #22443
where `docker pull` or `docker push` fails because of the
concurrent connection failing.
Currently, the number of maximum concurrent connections is
controlled by `maxDownloadConcurrency` and `maxUploadConcurrency`
which are hardcoded to 3 and 5 respectively. Therefore, in
situations where network connections don't support multiple
downloads/uploads, failures may encounter for `docker push`
or `docker pull`.
This fix tries changes `maxDownloadConcurrency` and
`maxUploadConcurrency` to adjustable by passing
`--max-concurrent-uploads` and `--max-concurrent-downloads` to
`docker daemon` command.
The documentation related to docker daemon has been updated.
Additional test case have been added to cover the changes in this fix.
This fix fixes#20936. This fix fixes#22443.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This gives discovery a chance to initialize, particularly if the K/V
store being used is in a container.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Currently the default seccomp profile is fixed. This changes it
so that it varies depending on the Linux capabilities selected with
the --cap-add and --cap-drop options. Without this, if a user adds
privileges, eg to allow ptrace with --cap-add sys_ptrace then still
cannot actually use ptrace as it is still blocked by seccomp, so
they will probably disable seccomp or use --privileged. With this
change the syscalls that are needed for the capability are also
allowed by the seccomp profile based on the selected capabilities.
While this patch makes it easier to do things with for example
cap_sys_admin enabled, as it will now allow creating new namespaces
and use of mount, it still allows less than --cap-add cap_sys_admin
--security-opt seccomp:unconfined would have previously. It is not
recommended that users run containers with cap_sys_admin as this does
give full access to the host machine.
It also cleans up some architecture specific system calls to be
only selected when needed.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
use a consistent approach for checking if the
backing filesystem is compatible with the
storage driver.
also add an error-message for the AUFS driver if
an incompatible combination is found.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since 1.9, driver specific log tag options
`syslog-tag`
`gelf-tag`
`fluentd-tag`
have been deprecated in favor of the generic tag
option which is standard across different logging
drivers.
This fix removed the deprecated driver specific
log tag options of `syslog-tag`, `gelf-tag`,
`fluentd-tag` for 1.12 and updated the docs.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The jsonlog logger currently allows specifying envs and labels that
should be propagated to the log message, however there has been no way
to read that back.
This adds a new API option to enable inserting these attrs back to the
log reader.
With timestamps, this looks like so:
```
92016-04-08T15:28:09.835913720Z foo=bar,hello=world hello
```
The extra attrs are comma separated before the log message but after
timestamps.
Without timestaps it looks like so:
```
foo=bar,hello=world hello
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to addess the issue in #21956 where `docker inspect`
will overwrite the log config options with default option even when
the `--log-driver` is not empty and `--log-opt` is empty. In this
situation, `docker inspect` and `docker run` is different.
With the introduction of #21153, the `HostConfig` will always have
the correct log-driver and log-opt values.
However, the previous processing of `docker inspect` was not updated
after the change in #21153. This results in the incorrect behavior.
This fix addresses this issue by updating `docker inspect` to conform
to #21153 so the the behavior of `docker inspect` and `docker run` is
consistent.
A integration test has been added to cover this fix.
This fix fixes#21956. This fix is related to #21153.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This flag can be set on disk if the daemon were to crash or error out
while trying to remove container in which case subsequent tries to
delete the container would all fail.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove function `WaitRunning` because it's actually not necessary, also
remove wait channel for state "running" to avoid mixed use of the state
wait channel.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
This change enables the workflow of finishing installing Windows OS updates in the container after it has completed running, via a special servicing container.
Signed-off-by: Stefan J. Wernli <swernli@microsoft.com>
This fix tries to address the issue raised in #22271 where
relative symlinks don't work with --device argument.
Previously, the symlinks in --device was implemneted (#20684)
with `os.Readlink()` which does not resolve if the linked
target is a relative path. In this fix, `filepath.EvalSymlinks()`
has been used which will reolve correctly with relative
paths.
An additional test case has been added to the existing
`TestRunDeviceSymlink` to cover changes in this fix.
This fix is related to #13840 and #20684, #22271.
This fix fixes#22271.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
commit 20a038eca6 changed
daemon configuration reloading to check if a value
was actually set, however, it checked for the wrong
property ("label" instead of "labels"), which resulted
in the labels only to be loaded from daemon.json if both
a "label" -and- a "labels" property was present.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There was an error in validation logic before, should use period
instead of quota, and also add check for negative
number here, if not with that, it would had cpu.cfs_period_us: invalid argument
which is not good for users.
Signed-off-by: Kai Qiang Wu(Kennan) <wkqwu@cn.ibm.com>
This makes sure fsdiff doesn't try to unmount things that shouldn't be.
**Note**: This is intended as a temporary solution to have as minor a
change as possible for 1.11.1. A bigger change will be required in order
to support container re-attach.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Right now there is no way to know what's the minimum free space threshold
daemon is applying. It would be good to export it through docker info and
then user knows what's the current value. Also this could be useful to
higher level management tools which can look at this value and setup their
own internal thresholds for image garbage collection etc.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
This fix tries to fix the http panics caused by container deletion
with empty names in #22210.
The issue was because when an empty string was passed, `GetByName()`
tried to access the first element of the name string without checking
the length. A length check has been added.
A test case for #22210 has been added.
This fix fixes#22210.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
