I made a mistake in the last commit - after resolving the IP from the
passed `addr` for CIFS it would still resolve the `device` part.
Apply only one name resolution
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Prior to 7a9b680a, the container short ID was added to the network
aliases only for custom networks. However, this logic wasn't preserved
in 6a2542d and now the cid is always added to the list of network
aliases.
This commit reintroduces the old logic.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
- pass the cluster as an argument instead of manually setting it after
creating the router-options
- remove the "opts" variable, to prevent it accidentally being used (with
the assumption that's the value returned)
- use a struct-literal for the returned options.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 21e50b89c9 added a label on the buildkit
worker to advertise the host-gateway-ip. This option can be either set by the
user in the daemon config, or otherwise defaults to the gateway-ip.
If no value is set by the user, discovery of the gateway-ip happens when
initializing the network-controller (`NewDaemon`, `daemon.restore()`).
However d222bf097c changed how we handle the
daemon config. As a result, the `cli.Config` used when initializing the
builder only holds configuration information form the daemon config
(user-specified or defaults), but is not updated with information set
by `NewDaemon`.
This patch adds an accessor on the daemon to get the current daemon config.
An alternative could be to return the config by `NewDaemon` (which should
likely be a _copy_ of the config).
Before this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: <nil>
After this patch:
docker buildx inspect default
Name: default
Driver: docker
Nodes:
Name: default
Endpoint: default
Status: running
Buildkit: v0.12.4+3b6880d2a00f
Platforms: linux/arm64, linux/amd64, linux/amd64/v2, linux/riscv64, linux/ppc64le, linux/s390x, linux/386, linux/mips64le, linux/mips64, linux/arm/v7, linux/arm/v6
Labels:
org.mobyproject.buildkit.worker.moby.host-gateway-ip: 172.18.0.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 8ae94cafa5 added a DNS resolution
of the `device` part of the volume option.
The previous way to resolve the passed hostname was to use `addr`
option, which was handled by the same code path as the `nfs` mount type.
The issue is that `addr` is also an SMB module option handled by kernel
and passing a hostname as `addr` produces an invalid argument error.
To fix that, restore the old behavior to handle `addr` the same way as
before, and only perform the new DNS resolution of `device` if there is
no `addr` passed.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Update the version of compose used in CI to the latest version.
- full diff: docker/compose@v2.24.1...v2.24.2
- release notes: https://github.com/docker/compose/releases/tag/v2.24.2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also fixes some potentially unclosed file-handles,
inlines some variables, and use consts for fixed
values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also fixing a "defer in loop" warning, instead changing to use
sub-tests, and simplifying some code, using os.WriteFile() instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The names of extended attributes are not completely freeform. Attributes
are namespaced, and the kernel enforces (among other things) that only
attributes whose names are prefixed with a valid namespace are
permitted. The name of the attribute therefore needs to be known in
order to diagnose issues with lsetxattr. Include the name of the
extended attribute in the errors returned from the Lsetxattr and
Lgetxattr so users and us can more easily troubleshoot xattr-related
issues. Include the name in a separate rich-error field to provide code
handling the error enough information to determine whether or not the
failure can be ignored.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The `GetImageOpts` struct is used for options to be passed to the backend,
and are not used in client code. This struct currently is intended for internal
use only.
This patch moves the `GetImageOpts` struct to the backend package to prevent
it being imported in the client, and to make it more clear that this is part
of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The MAC address of a running container was stored in the same place as
the configured address for a container.
When starting a stopped container, a generated address was treated as a
configured address. If that generated address (based on an IPAM-assigned
IP address) had been reused, the containers ended up with duplicate MAC
addresses.
So, remember whether the MAC address was explicitly configured, and
clear it if not.
Signed-off-by: Rob Murray <rob.murray@docker.com>
With containerd snapshotters enabled `docker run` currently fails when
creating a container from an image that doesn't have the default host
platform without an explicit `--platform` selection:
```
$ docker run image:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
This is confusing and the graphdriver behavior is much better here,
because it runs whatever platform the image has, but prints a warning:
```
$ docker run image:amd64
WARNING: The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested
```
This commits changes the containerd snapshotter behavior to be the same
as the graphdriver. This doesn't affect container creation when platform
is specified explicitly.
```
$ docker run --rm --platform linux/arm64 asdf:amd64
Unable to find image 'asdf:amd64' locally
docker: Error response from daemon: pull access denied for asdf, repository does not exist or may require 'docker login'.
See 'docker run --help'.
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Order the layers in OCI manifest by their actual apply order. This is
required by the OCI image spec.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Since v25.0 (commit ff50388), we validate endpoint settings when
containers are created, instead of doing so when containers are started.
However, a container created prior to that release would still trigger
validation error at start-time. In such case, the API returns a 500
status code because the Go error isn't wrapped into an InvalidParameter
error. This is now fixed.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
This test was added in f301c5765a to test
inspect output for API > v1.21, however, it was pinned to API v1.21,
which is now deprecated.
Remove the fixed version, as the intent was to test "current" API versions
(API v1.21 and up),
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in f301c5765a to test
inspect output for API > v1.21, however, it was pinned to API v1.21,
which is now deprecated.
Remove the fixed version, as the intent was to test "current" API versions
(API v1.21 and up),
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in 75f6929b44, but pinned
to the API version that was current at the time (v1.20), which is now
deprecated.
Update the test to use the current API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These tables linked to deprecated API versions, and an up-to-date version of
the matrix is already included at https://docs.docker.com/engine/api/#api-version-matrix
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- add some asserts for unhandled errors
- use consts for fixed values, and slightly re-format Dockerfile contentt
- inline one-line Dockerfiles
- fix some vars to be properly camel-cased
- improve assert for error-types;
Before:
=== RUN TestBuildPlatformInvalid
build_test.go:685: assertion failed: expression is false: errdefs.IsInvalidParameter(err)
--- FAIL: TestBuildPlatformInvalid (0.01s)
FAIL
After:
=== RUN TestBuildPlatformInvalid
build_test.go:689: assertion failed: error is Error response from daemon: "foobar": unknown operating system or architecture: invalid argument (errdefs.errSystem), not errdefs.IsInvalidParameter
--- FAIL: TestBuildPlatformInvalid (0.01s)
FAIL
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
