Replaced using a bit of grep-ing;
```
find . -name "*_test.go" -exec sed -E -i 's#assert.Assert\((.*), fmt.Sprintf\((.*)\)\)$#assert.Assert\(\1, \2\)#g' '{}' \;
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting the daemon should not load the busybox image again
in most cases, so add a new `StartNodeWithBusybox` function
to be clear that this one loads the busybox image, and use
`StartNode()` for cases where loading the busybox image is
not needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go run rm-gocheck.go redress '[^/]\bcheck\.Suite\(.*\{\s*$' \
"integration-cli/check_test.go" "integration-cli/docker_cli_external_volume_driver_unix_test.go" "integration-cli/docker_cli_network_unix_test.go"
Signed-off-by: Tibor Vass <tibor@docker.com>
Tests fixed in this patch used to compile and pass successfully,
despite checking if non-nullable types are not nil.
These would have become compile errors once go-check is removed.
About TestContainerAPIPsOmitFields:
Basically what happened is that this test got refactored to start using the API types
and API client library instead of custom types and stdlib's http functions.
This test used to test an API regression which could possibly be a unit test.
However because PublicPort and IP are not nullable types, this test became useless.
Signed-off-by: Tibor Vass <tibor@docker.com>
Noticed this test container not exiting correctly while debugging
another issue. Before this change, signals were being eaten by bash, now
they are hanlded by top. This cuts the test time in half since it
doesn't have to wait for docker to SIGKILL it.
Old:
PASS: docker_cli_swarm_test.go:840: DockerSwarmSuite.TestSwarmServiceTTY 18.997s
New:
PASS: docker_cli_swarm_test.go:840: DockerSwarmSuite.TestSwarmServiceTTY 6.293s
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
TestBuildMulitStageResetScratch testcase was actually meant to be
TestBuildMulitStageResetScratch
Signed-off-by: Vitaly Ostrosablin <tmp6154@yandex.ru>
TestSwarmClusterRotateUnlockKey had been identified as a flaky test. It
turns out that the test code was wrong: where we should have been
checking the string output of a command, we were instead checking the
value of the error. This means that the error case we were expecting was
not being matched, and the test was failing when it should have just
retried.
Signed-off-by: Drew Erny <drew.erny@docker.com>
The `DockerDaemonSuite.SetUpTest` already checks for Linux and a local daemon;
```
func (s *DockerDaemonSuite) SetUpTest(c *check.C) {
testRequires(c, DaemonIsLinux, testEnv.IsLocalDaemon)
s.d = daemon.New(c, dockerBinary, dockerdBinary, testdaemon.WithEnvironment(testEnv.Execution))
}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Code retrying service update operations when receiving "update out of
sequence" errors was removed because of a misunderstanding, which has
made tests flaky. This re-adds the "CmdRetryOutOfSequence" method, and
uses it in TestSwarmPublishAdd to avoid flaky behavior.
Signed-off-by: Drew Erny <drew.erny@docker.com>
The `--stars` flag was deprecated, and was replaced by `--filter stars=xx`
Integration tests run with a fixed version of the CLI, and the new
(`--filter`) option is already tested in this test, so there's no need
to verify the old flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--stars` and `--automated` flags have been deprecated, and were
replaced by `--filter stars=xx` and `--filter is-automated=true`.
Integration tests run with a fixed version of the CLI, and the new
(`--filter`) option is already tested in this test, so there's no need
to verify the old flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Both `--help` and `--no-trunc` are implemented in the CLI. There's
no need to verify them here because the integration tests use a
fixed version of the CLI.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Removes some test functions that were unused:
- bridgeNfIP6tables
- ambientCapabilities (added to support #26979, which was reverted in #27737)
- overlay2Supported
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the second part to
https://github.com/containerd/containerd/pull/3361 and will help process
delete not block forever when the process exists but the I/O was
inherited by a subprocess that lives on.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
This test runs on a daemon also used by other tests
so make sure we don't get failures if another test
doesn't cleanup or is running in parallel.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test is dependent on the search results returned by Docker Hub, which
can change at any moment, and causes this test to be unpredictable.
Removing this test instead of trying to catch up with Docker Hub any time
the results change, because it's effectively testing Docker Hub, and not
the daemon.
Unit tests are already in place to test the core functionality of the daemon,
so it should be safe to remove this test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`chmod` is a legacy syscall, and not present on arm64, which
caused this test to fail.
Add `fchmodat` to the profile so that this test can run both
on x64 and arm64.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sometimes this test fails (allegedly due to problems with Docker Hub),
but it fails later than it should, for example:
> 01:20:34.845 assertion failed: expression is false: strings.Count(outSearchCmdStars, "[OK]") <= strings.Count(outSearchCmd, "[OK]"): The quantity of images with stars should be less than that of all images: <...>
This, with non-empty list of images following, means that the initial
`docker search busybox` command returned not enough results. So, add
a check that `docker search busybox` returns something.
While at it,
* raise the number of stars to 10;
* simplify check for number of lines (no need to count [OK]'s);
* improve error message.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Don't use two-stage mount in TestContainersAPICreateMountsCreate();
apparently it was written before mount.Mount() could accept propagation
flags.
While at it, remove rw as this is the default.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This PR is a small gofmt fix of https://goreportcard.com/report/github.com/moby/moby#gofmt
```
gofmt99%
Gofmt formats Go programs. We run gofmt -s on your code, where -s is for the "simplify" command
moby/integration-cli/docker_cli_run_test.go
Line 1: warning: file is not gofmted with -s (gofmt)
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Instead of having to go through files or registry values as is currently the
case.
While adding GMSA support to Kubernetes (https://github.com/kubernetes/kubernetes/pull/73726)
I stumbled upon the fact that Docker currently only allows passing Windows
credential specs through files or registry values, forcing the Kubelet
to perform a rather awkward dance of writing-then-deleting to either the
disk or the registry to be able to create a Windows container with cred
specs.
This patch solves this problem by making it possible to directly pass
whole base64-encoded cred specs to the engine's API. I took the opportunity
to slightly refactor the method responsible for Windows cred spec as it
seemed hard to read to me.
Added some unit tests on Windows credential specs handling, as there were
previously none.
Added/amended the relevant integration tests.
I have also tested it manually: given a Windows container using a cred spec
that you would normally start with e.g.
```powershell
docker run --rm --security-opt "credentialspec=file://win.json" mcr.microsoft.com/windows/servercore:ltsc2019 nltest /parentdomain
# output:
# my.ad.domain.com. (1)
# The command completed successfully
```
can now equivalently be started with
```powershell
$rawCredSpec = & cat 'C:\ProgramData\docker\credentialspecs\win.json'
$escaped = $rawCredSpec.Replace('"', '\"')
docker run --rm --security-opt "credentialspec=raw://$escaped" mcr.microsoft.com/windows/servercore:ltsc2019 nltest /parentdomain
# same output!
```
I'll do another PR on Swarmkit after this is merged to allow services to use
the same option.
(It's worth noting that @dperny faced the same problem adding GMSA support
to Swarmkit, to which he came up with an interesting solution - see
https://github.com/moby/moby/pull/38632 - but alas these tricks are not
available to the Kubelet.)
Signed-off-by: Jean Rouge <rougej+github@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Also fixes https://github.com/moby/moby/issues/22874
This commit is a pre-requisite to moving moby/moby on Windows to using
Containerd for its runtime.
The reason for this is that the interface between moby and containerd
for the runtime is an OCI spec which must be unambigious.
It is the responsibility of the runtime (runhcs in the case of
containerd on Windows) to ensure that arguments are escaped prior
to calling into HCS and onwards to the Win32 CreateProcess call.
Previously, the builder was always escaping arguments which has
led to several bugs in moby. Because the local runtime in
libcontainerd had context of whether or not arguments were escaped,
it was possible to hack around in daemon/oci_windows.go with
knowledge of the context of the call (from builder or not).
With a remote runtime, this is not possible as there's rightly
no context of the caller passed across in the OCI spec. Put another
way, as I put above, the OCI spec must be unambigious.
The other previous limitation (which leads to various subtle bugs)
is that moby is coded entirely from a Linux-centric point of view.
Unfortunately, Windows != Linux. Windows CreateProcess uses a
command line, not an array of arguments. And it has very specific
rules about how to escape a command line. Some interesting reading
links about this are:
https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/https://stackoverflow.com/questions/31838469/how-do-i-convert-argv-to-lpcommandline-parameter-of-createprocesshttps://docs.microsoft.com/en-us/cpp/cpp/parsing-cpp-command-line-arguments?view=vs-2017
For this reason, the OCI spec has recently been updated to cater
for more natural syntax by including a CommandLine option in
Process.
What does this commit do?
Primary objective is to ensure that the built OCI spec is unambigious.
It changes the builder so that `ArgsEscaped` as commited in a
layer is only controlled by the use of CMD or ENTRYPOINT.
Subsequently, when calling in to create a container from the builder,
if follows a different path to both `docker run` and `docker create`
using the added `ContainerCreateIgnoreImagesArgsEscaped`. This allows
a RUN from the builder to control how to escape in the OCI spec.
It changes the builder so that when shell form is used for RUN,
CMD or ENTRYPOINT, it builds (for WCOW) a more natural command line
using the original as put by the user in the dockerfile, not
the parsed version as a set of args which loses fidelity.
This command line is put into args[0] and `ArgsEscaped` is set
to true for CMD or ENTRYPOINT. A RUN statement does not commit
`ArgsEscaped` to the commited layer regardless or whether shell
or exec form were used.
There's no need to try to re-build the test images if they already
exist. This change makes basically no difference to the upstream
integration test-suite running, but for users who want to run the
integration-cli suite on a host machine (such as distributions doing
tests) this change allows images to be pre-loaded such that compilers
aren't needed on the test machine.
However, this does remove the accidental re-compilation of nnp-test, as
well as handling errors far more cleanly (previously if an error
occurred during a test build, further tests won't attempt to rebuild
it).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Move the test case from integration-cli to integration.
The test logic itself has not changed, except these
two things:
* the new test sets default-ipc-mode via command line
rather than via daemon.json (less code);
* the new test uses current API version.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
- Add support for exact list of capabilities, support only OCI model
- Support OCI model on CapAdd and CapDrop but remain backward compatibility
- Create variable locally instead of declaring it at the top
- Use const for magic "ALL" value
- Rename `cap` variable as it overlaps with `cap()` built-in
- Normalize and validate capabilities before use
- Move validation for conflicting options to validateHostConfig()
- TweakCapabilities: simplify logic to calculate capabilities
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test sometimes failed because the number of events received did not
match the expected number:
FAIL: docker_cli_events_test.go:316: DockerSuite.TestEventsFilterLabels
docker_cli_events_test.go:334:
c.Assert(len(events), checker.Equals, 3)
... obtained int = 2
... expected int = 3
This patch makes the test more stable, by:
- use a wider range between `--since` and `--until`. These options were set
so that the client detaches after events were received, but the actual
range should not matter. Changing the range will cause more events to be
returned, but we're specifically looking for the container ID's, so this
should not make a difference for the actual test.
- use `docker create` instead of `docker run` for the containers. the
containers don't have to be running to trigger an event; using `create`
speeds up the test.
- check the exit code of the `docker create` to verify the containers were
succesfully created.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I noticed that this test failed, because the node was in status "pending".
The test checks for the node's status immediately after it was restarted, so
possibly it needs some time to unlock.
14:07:10 FAIL: docker_cli_swarm_test.go:1128: DockerSwarmSuite.TestSwarmLockUnlockCluster
...
14:07:10 docker_cli_swarm_test.go:1168:
14:07:10 checkSwarmLockedToUnlocked(c, d)
14:07:10 docker_cli_swarm_test.go:1017:
14:07:10 c.Assert(getNodeStatus(c, d), checker.Equals, swarm.LocalNodeStateActive)
14:07:10 ... obtained swarm.LocalNodeState = "pending"
14:07:10 ... expected swarm.LocalNodeState = "active"
This patch adds a `waitAndAssert` for the node's status, with a 1 second timeout.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
RHEL/CentOS 3.10 kernels report that kernel-memory accounting is supported,
but it actually does not work.
Runc (when compiled for those kernels) will be compiled without kernel-memory
support, so even though the daemon may be reporting that it's supported,
it actually is not.
This cause tests to fail when testing against a daemon that's using a runc
version without kmem support.
For now, skip these tests based on the kernel version reported by the daemon.
This should fix failures such as:
```
FAIL: /go/src/github.com/docker/docker/integration-cli/docker_cli_run_unix_test.go:499: DockerSuite.TestRunWithKernelMemory
assertion failed:
Command: /usr/bin/docker run --kernel-memory 50M --name test1 busybox cat /sys/fs/cgroup/memory/memory.kmem.limit_in_bytes
ExitCode: 0
Error: <nil>
Stdout: 9223372036854771712
Stderr: WARNING: You specified a kernel memory limit on a kernel older than 4.0. Kernel memory limits are experimental on older kernels, it won't work as expected and can cause your system to be unstable.
Failures:
Expected stdout to contain "52428800"
FAIL: /go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go:125: DockerSuite.TestUpdateKernelMemory
/go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go:136:
...open /go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go: no such file or directory
... obtained string = "9223372036854771712"
... expected string = "104857600"
----------------------------------------------------------------------
FAIL: /go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go:139: DockerSuite.TestUpdateKernelMemoryUninitialized
/go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go:149:
...open /go/src/github.com/docker/docker/integration-cli/docker_cli_update_unix_test.go: no such file or directory
... value = nil
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- TestAPISwarmLeaderElection
- TestAPISwarmRaftQuorum
- TestSwarmClusterRotateUnlockKey
because they are known to be flaky.
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
Using `errors.Errorf()` passes the error with the stack trace for
debugging purposes.
Also using `errdefs.InvalidParameter` for Windows, so that the API
will return a 4xx status, instead of a 5xx, and added tests for
both validations.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Description:
When using local volume option such as size=10G, type=tmpfs, if we provide wrong options, we could create volume successfully.
But when we are ready to use it, it will fail to start container by failing to mount the local volume(invalid option).
We should check the options at when we create it.
Signed-off-by: Wentao Zhang <zhangwentao234@huawei.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A lack of check in the test code can lead to a panic due to
`len(ids)` being `0`.
Avoid the panic by adding appropriate checks. Note `Assert()` should be
used rather than `Check()` as if it fails we should not proceed with the
test.
Originally found in https://github.com/moby/moby/pull/38404.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is a follow-on from https://github.com/moby/moby/pull/38277
but had to be done in a couple of stages to ensure that CI didn't
break. v1.1 of the busybox image is now based on a CMD of "sh"
rather than using an entrypoint. And it also uses the bin directory
rather than `c:\busybox`. This makes it look a lot closer to the
Linux busybox image, and means that a couple of Windows-isms in
CI tests can be reverted back to be identical to their Linux
equivalents.
When starting docker daemons for swarm testing, we disable iptables
and use lo for communication (in order to avoid network conflicts).
The problem is, these options are lost on restart, that can lead
to any sorts of network conflicts and thus connectivity issues
between swarm nodes.
Fix this. This does not fix issues with swarm test failures, but
it seems they appear are less often after this one.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is repeated 6 times in different tests, with slight
minor variations. Let's factor it out, for clarity.
While at it, simplify the code: instead of more complex
parsing of "docker swarm init|update --autolock" output (1)
and checking if the key is also present in
"docker swarm unlock-key" output (2), get the key
from (2) and check it is present in (1).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since commit 17173efbe0 checkSwarmLockedToUnlocked() no longer
require its third argument, so remove it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
These messages were enhanced to include the path that was
missing (in df6af282b9), but
also changed the first part of the message.
This change complicates running e2e tests with mixed versions
of the engine.
Looking at the full error message, "mount" is a bit redundant
as well, because the error message already indicates this is
about a "mount";
docker run --rm --mount type=bind,source=/no-such-thing,target=/foo busybox
docker: Error response from daemon: invalid mount config for type "bind": bind mount source path does not exist: /no-such-thing.
Removing the "mount" part from the error message, because
it was redundant, and makes cross-version testing easier :)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The tests performed by integration tests TestConfigCreateWithFile and
TestSecretCreateWithFile are already covered by integration tests under
integration/config and integration/secret, respectively, except for the
use of an input file. The latter is also covered by unit tests for
config and secret commands under docker/cli, making the above
integration tests redundant.
Signed-off-by: Arash Deshmeh <adeshmeh@ca.ibm.com>
This test is the same as TestExportContainerAndImportImage, except for the output file option.
A unit test has been added to docker/cli to cover the output file option. Therefore this test can be removed.
Signed-off-by: Arash Deshmeh <adeshmeh@ca.ibm.com>
This should eliminate a bunch of new (go-1.11 related) validation
errors telling that the code is not formatted with `gofmt -s`.
No functional change, just whitespace (i.e.
`git show --ignore-space-change` shows nothing).
Patch generated with:
> git ls-files | grep -v ^vendor/ | grep .go$ | xargs gofmt -s -w
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It looks like the logic of the test became wrong after commit
ae0883c ("Move TestAttachDetach to integration-cli").
The original logic was:
* (a few first steps skipped for clarity)
* send escape sequence to "attach";
* check "attach" is exiting (i.e. escape sequence works);
* check the container is still alive;
* kill the container.
Also, timeouts were big at that time, in the order of seconds.
The logic after the above mentioned commit and until now is:
* ...
* send escape sequence to "attach";
* check the container is running (why shouldn't it?);
* kill the container;
* checks that the "attach" has exited.
So, from the "let's check detach using escape sequence is working"
the test became something like "let's check that attach is gone
once we kill the container".
Let's fix the above test, also increasing the timeout waiting
for attach to exit (which fails from time to time on power CI).
Now, the second test, TestAttachDetachTruncatedID, does the exact
same thing, except it uses a truncated container ID. It does not
seem to be of much value, so let's remove it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. After running d.Cmd(), in case an error is returned, it makes sense
to print command output, as its stderr may contain a clue about what
went wrong. This is by no means complete, just as far as I could go.
2. In case the comment in c.Assert is a constant string, it's better
to provide it as a comment which will be printed.
3. An arbitrary string should not be passed on to a function expecting
%-style formatting. Use %s to fix this.
4. Print the output string before transformation, not after.
5. Unify the output format (drop "out:" prefix").
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It is wrong to pass an arbitrary string to a function expecting
%-style formatting. One solution would be to replace any % with %%,
but it's easier to just do what this patch does.
Generated with:
for f in $(git grep -l 'check.Commentf(out)'); do \
sed -i -e 's/check\.Commentf(out)/check.Commentf("%s", out)/g' $f; \
done
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of waiting for the DNS to fail, try to access
a specific external IP and verify that 100% of the pakcets
are being lost.
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
The TestDockerNetworkIPAMMultipleNetworks test allocates several
networks simultaneously with overlapping IP addresses. Libnetwork now
forbids this. Adjust the test case to use distinct IP ranges for the
networks it creates.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
This test is testing if any "no space left on device" errors
that occur during `docker pull` will not be masked by other
errors. To test for this, a new loopback-device was created,
and used as `--data-dir` ("/var/lib/docker").
However, `/var/lib/docker` is used for storing various
other things, including a `cache.db` database, used by
BuildKit, which is created during startup of the daemon.
Creation of that file failed (due to `--data-dir` path
being on a mount with limited size), which caused daemon
start to fail before the test was able to run.
This patch changes the size-limited mount to be used for
the storage-driver directory only, so that the test is
not affected by other parts of the code attempting to
write files in it.
To have a predictable path; the daemon used in this test
is configured to use the `vfs` storage-driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Begin to copy the data until the command to exit and any coping to
stdin or copy from stdout/stderr has completed.
Also adding defense code to trim the possible '\x00' null value.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
The following failure is seen in CI from time to time:
> FAIL: docker_api_containers_test.go:435: DockerSuite.TestContainerAPITop
>
> docker_api_containers_test.go:453:
> c.Assert(top.Processes[0][10], checker.Equals, "/bin/sh -c top")
> ... obtained string = "top"
> ... expected string = "/bin/sh -c top"
The test case expects two processes in the output:
1. /bin/sh -c top
2. top
in the given order.
Now, "ps aux" output is sorted by PID*, and so since the "top" is a child
of "/bin/sh -c top" it has a higher PID and will come second as expected
by the test... unless the PIDs on the system are exhausted and PID rollover
happens, in which case PID of "top" will be lower than that of "/bin/sh".
Fix: sort output by process name.
* - in fact it is not sorted, but is being printed in the same order as
the kernel list PID entries in /proc directory, which appears to be
sorted by PID (see ls -1 -U /proc).
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
`arm64` needs get more time duration for the test to finish.
`pty.Start()` opens a file, so the caller should close it explicitly,
else the file I/O can result in unexpected data synchronization issue.
All those changes will not affect the test itself.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
This issue has been reported by issue #36877.
The purpose of this test case is for the regression test of #12546,
so we only need to make sure the essential of the testing is still
in the way to check that while not disturbed by some testing noises,
which is exactly what this PR want to do.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
When this test fails, the error looks like this:
> FAIL: docker_api_attach_test.go:98: DockerSuite.TestPostContainersAttach
> docker_api_attach_test.go:211:
> c.Assert(actualStdout.Bytes(), checker.DeepEquals, []byte("hello\nsuccess"), check.Commentf("Attach didn't return the expected data from stdout"))
> ... obtained []uint8 = []byte{0x73, 0x75, 0x63, 0x63, 0x65, 0x73, 0x73}
> ... expected []uint8 = []byte{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0xa, 0x73, 0x75, 0x63, 0x63, 0x65, 0x73, 0x73}
> ... Attach didn't return the expected data from stdout
Let's use strings for comparisons to make the output more readable.
While at it,
- get the container's stderr as well, and make sure it's empty;
- check that stdcopy.StdCopy() did not return an error, except for
the timeout which is expected;
- move/remove comments, simplify var names.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since Go 1.7, context is a standard package. Since Go 1.9, everything
that is provided by "x/net/context" is a couple of type aliases to
types in "context".
Many vendored packages still use x/net/context, so vendor entry remains
for now.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Functions `GetMounts()` and `parseMountTable()` return all the entries
as read and parsed from /proc/self/mountinfo. In many cases the caller
is only interested only one or a few entries, not all of them.
One good example is `Mounted()` function, which looks for a specific
entry only. Another example is `RecursiveUnmount()` which is only
interested in mount under a specific path.
This commit adds `filter` argument to `GetMounts()` to implement
two things:
1. filter out entries a caller is not interested in
2. stop processing if a caller is found what it wanted
`nil` can be passed to get a backward-compatible behavior, i.e. return
all the entries.
A few filters are implemented:
- `PrefixFilter`: filters out all entries not under `prefix`
- `SingleEntryFilter`: looks for a specific entry
Finally, `Mounted()` is modified to use `SingleEntryFilter()`, and
`RecursiveUnmount()` is using `PrefixFilter()`.
Unit tests are added to check filters are working.
[v2: ditch NoFilter, use nil]
[v3: ditch GetMountsFiltered()]
[v4: add unit test for filters]
[v5: switch to gotestyourself]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
All `plugins` tests that require an `ExperimentalDaemon` are migrated
to `integration/plugin/*` and start an experimental daemon to test on
it.
The end goal being to remove the `experimental` build.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Porting helpers from `integration-cli/daemon.Daemon` to this struct
and use the API instead of the cli.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Move go package used by both `integration-cli` and `integration` to
`internal/test/fixtures`.
- Remove fixtures that are not used anymore (moved to `docker/cli` a
while ago) : deploy, notary, secrets.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Move the code from `integration-cli` to `internal/test`.
- Use `testingT` and `assert` when creating the registry.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
All `Ipvlan` related test on `DockerSuite` and `DockerNetworkSuite`
are migrated to `ipvlan_test.go`.
The end goal being to remove the `experimental` builds.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
… and do not use the `docker` cli in it. One of the reason of this
move is to not make `integration` package using legacy
`integration-cli` package.
Next move will be to support swarm within this package *and* provide
some helper function using the api (compared to the one using cli in
`integration-cli/daemon` package).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
It does not make any sense to vary this based on whether the
rootfs is read only. We removed all the other mount dependencies
on read-only eg see #35344.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
There is no need to perform a separate losetup step; mount (even
the one in busybox!) is smart enough to set up a loopback device
all by itself (even without -o loop present!). More to say, while
doing this, it sets LO_FLAGS_AUTOCLEAR flag for the kernel to
delete the loopback device as soon as its fs is unmounted (this
is supposed to work since kernel 2.6.25).
Also, remove mount options (-t ext4, -o loop,rw) as they are
either defaults (rw) or mount is smart enough to figure out.
Leave -n so it won't do unnecessary write to container's /etc/mtab.
While at it, touch up some comments.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
All `docker build` tests that require an `ExperimentalDaemon` are
migrated to `integration/build` package and start an experimental
daemon to test on it.
The end goal being to remove the `experimental` builds.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
A minor nit. `test01` never been created and used in
`TestDockerNetworkInspectCustomSpecified()` function, so correct it.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
