This type is only used by CLI code. It duplicates SecretReference in the
types/swarm package. Change the CLI code to use that type instead.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds 'consistency' mode flags to the mount command line argument.
Initially, the valid 'consistency' flags are 'consistent', 'cached',
'delegated', and 'default'.
Signed-off-by: David Sheets <dsheets@docker.com>
Signed-off-by: Jeremy Yallop <yallop@docker.com>
We ignored errors for simple syntax in `PortOpt` (missed that in the
previous migration of this code). This make sure we don't ignore
`nat.Parse` errors.
Test has been migrate too (errors are not exactly the same as before
though -_-)
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix catches the case where there is a single container port
and a dynamic host port and will fail out gracefully
Example docker-compose.yml snippet:
port:
ports:
- "8091-8093:8091"
- "80:8080"
Signed-off-by: Tony Abboud <tdabboud@hotmail.com>
Commit a77f2450c7 switched `docker run`
to use the `pflags` package. Due to this change, the usage output for
the `--blkio-weight-device` and `--device-*` flags changed and now
showed `weighted-device`, and `throttled-device` as value type. As a
result, the output of `docker run --help` became a lot wider.
This patch changes the output to show `list` instead, which is
consistent with other options that allow to be set multiple times.
Output before this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device weighted-device Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps throttled-device Limit read rate (bytes per second) from a device (default [])
--device-read-iops throttled-device Limit read rate (IO per second) from a device (default [])
--device-write-bps throttled-device Limit write rate (bytes per second) to a device (default [])
--device-write-iops throttled-device Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Output after this change;
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Options:
--blkio-weight uint16 Block IO (relative weight), between 10 and 1000, or 0 to disable (default 0)
--blkio-weight-device list Block IO weight (relative device weight) (default [])
--device list Add a host device to the container (default [])
--device-read-bps list Limit read rate (bytes per second) from a device (default [])
--device-read-iops list Limit read rate (IO per second) from a device (default [])
--device-write-bps list Limit write rate (bytes per second) to a device (default [])
--device-write-iops list Limit write rate (IO per second) to a device (default [])
-w, --workdir string Working directory inside the container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently `--publish-rm` only accepts `<TargetPort>` or `<TargetPort>[/Protocol]`
though there are some confusions.
Since `--publish-add` accepts `<PublishedPort>:<TargetPort>[/Protocol]`, some user
may provide `--publish-rm 80:80`. However, there is no error checking so the incorrect
provided argument is ignored silently.
This fix adds the check to make sure `--publish-rm` only accepts `<TargetPort>[/Protocol]`
and returns error if the format is invalid.
The `--publish-rm` itself may needs to be revisited to have a better UI/UX experience,
see discussions on:
https://github.com/docker/swarmkit/issues/1396https://github.com/docker/docker/issues/25200#issuecomment-236213242https://github.com/docker/docker/issues/25338#issuecomment-240787002
This fix is short term measure so that end users are not misled by the silently ignored error
of `--publish-rm`.
This fix is related to (but is not a complete fix):
https://github.com/docker/swarmkit/issues/1396
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment:
https://github.com/docker/docker/pull/28147#discussion_r86996347
Previously the output string of the `DurationOpt` is `duration-ptr`
and `Uint64Opt` is `uint64-ptr`. While it is clear to developers,
for a normal user `-ptr` might not be very informative.
On the other hand, the default value of `DurationOpt` and `Uint64Opt`
has already been quite informative: `none`. That means if no flag
provided, the value will be treated as none.
(like a ptr with nil as the default)
For that reason this fix removes the `-ptr`.
Also, the output in the docs of `service create` has been quite
out-of-sync with the true output. So this fix updates the docs
to have the most up-to-date help output of `service create --help`.
This fix is related to #28147.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 27921 and add
`--cpus` flag for `docker run/create`.
Basically, `--cpus` will allow user to specify a number (possibly partial)
about how many CPUs the container will use. For example, on a 2-CPU system
`--cpus 1.5` means the container will take 75% (1.5/2) of the CPU share.
This fix adds a `NanoCPUs` field to `HostConfig` since swarmkit alreay
have a concept of NanoCPUs for tasks. The `--cpus` flag will translate
the number into reused `NanoCPUs` to be consistent.
This fix adds integration tests to cover the changes.
Related docs (`docker run` and Remote APIs) have been updated.
This fix fixes 27921.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The code for default port was already there but
it didn’t work because split function errored out
before. This should be the desired behavior that
matches daemon listen address with swarm listen
address.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
As described in our ROADMAP.md, introduce new Swarm management API
endpoints relying on swarmkit to deploy services. It currently vendors
docker/engine-api changes.
This PR is fully backward compatible (joining a Swarm is an optional
feature of the Engine, and existing commands are not impacted).
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Victor Vieux <vieux@docker.com>
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This changes the default transport for Windows from unencrypted TCP to
npipe. This is similar to how Linux runs with the unix socket transport by
default.
Signed-off-by: John Starks <jostarks@microsoft.com>
This adds an npipe protocol option for Windows hosts, akin to unix
sockets for Linux hosts. This should become the default transport
for Windows, but this change does not yet do that.
It also does not add support for the client side yet since that
code is in engine-api, which will have to be revendored separately.
Signed-off-by: John Starks <jostarks@microsoft.com>
Read configuration after flags making this the priority:
1- Apply configuration from file.
2- Apply configuration from flags.
Reload configuration when a signal is received, USR2 in Linux:
- Reload router if the debug configuration changes.
- Reload daemon labels.
- Reload cluster discovery.
Signed-off-by: David Calavera <david.calavera@gmail.com>
