Makes sure that tests use a config struct that's more representative
to how it's used in the code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This centralizes more defaults, to be part of the config struct that's
created, instead of interweaving the defaults with other code in various
places.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- return early if we're expecting a system-containerd
- rename `initContainerD` to `initContainerd` ':)
- remove .Config to reduce verbosity
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Change the log-level for messages about starting the managed containerd instance
to be the same as for the main API. And remove a redundant debug-log.
With this patch:
dockerd
INFO[2022-08-11T11:46:32.573299176Z] Starting up
INFO[2022-08-11T11:46:32.574304409Z] containerd not running, starting managed containerd
INFO[2022-08-11T11:46:32.575289181Z] started new containerd process address=/var/run/docker/containerd/containerd.sock module=libcontainerd pid=5370
cmd/dockerd: initContainerD(): clean-up some logs
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the `--log-level` flag overrides whatever is in the containerd configuration file;
f033f6ff85/cmd/containerd/command/main.go (L339-L352)
Given that we set that flag when we start the containerd binary, there is no need
to write it both to the generated config-file and pass it as flag.
This patch also slightly changes the behavior; as both dockerd and containerd use
"info" as default log-level, don't set the log-level if it's the default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Containerd, like dockerd has a OOMScore configuration option to adjust its own
OOM score. In dockerd, this option was added when default installations were not
yet running the daemon as a systemd unit, which made it more complicated to set
the score, and adding a daemon option was convenient.
A binary adjusting its own score has been frowned upon, as it's more logical to
make that the responsibility of the process manager _starting_ the daemon, which
is what we did for dockerd in 21578530d7.
There have been discussions on deprecating the daemon flag for dockerd, and
similar discussions have been happening for containerd.
This patch changes how we set the OOM score for the containerd child process,
and to have dockerd (supervisor) set the OOM score, as it's acting as process
manager in this case (performing a role similar to systemd otherwise).
With this patch, the score is still adjusted as usual, but not written to the
containerd configuration file;
dockerd --oom-score-adjust=-123
cat /proc/$(pidof containerd)/oom_score_adj
-123
As a follow-up, we may consider to adjust the containerd OOM score based on the
daemon's own score instead of on the `cli.OOMScoreAdjust` configuration so that
we will also adjust the score in situations where dockerd's OOM score was set
through other ways (systemd or manually adjusting the cgroup). A TODO was added
for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- properly use filepath.Join() for Windows paths
- use getDaemonConfDir() to get the path for storing daemon.json
- return error instead of logrus.Fatal(). The logrus.Fatal() was a left-over
from when Cobra was not used, and appears to have been missed in commit
fb83394714, which did the conversion to Cobra.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The existing implementation used a `nil` value for the CRI plugin's configuration
to indicate that the plugin had to be disabled. Effectively, the `Plugins` value
was only used as an intermediate step, only to be removed later on, and to instead
add the given plugin to `DisabledPlugins` in the containerd configuration.
This patch removes the intermediate step; as a result we also don't need to mask
the containerd `Plugins` field, which was added to allow serializing the toml.
A code comment was added as well to explain why we're (currently) disabling the
CRI plugin by default, which may help future visitors of the code to determin
if that default is still needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Initial pull/ls works
Build is deactivated if the feature is active
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Set the defaults when constructing the config, instead of setting them
indirectly through the command-line flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function depends on flags having been parsed before it's used;
add a safety-net in case this function would be called before that.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This prevents creating a socket and touching the filesystem before
trying to use a port that was already in use by a container.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The LoopkupImage method is only used by the inspect image route and
returns an api/type struct. The depenency to api/types of the
daemon/images package is wrong, the daemon doesn't need to know about
the api types.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Use the default (0) value to indicate "not set", which simplifies
working with these configuration options, preventing the need to
use intermediate variables etc.
While changing this code, also making some small cleanups, such
as replacing "fmt.Sprintf()" for "strconv" variants.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
spf13/pflag now provides this out of the box, so no need to implement
and use our own value-type for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This file was originally part of the work to support Solaris, and
there's nothing "not common unix" anymmore, so merging the files.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
installConfigFlags already has separate implementations for Linux and
Windows, so no need to further differentiate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The installCommonConfigFlags() function is meant for flags that are
supported by all platforms, so removing it from that function.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, the API server configuration would be initialized and
validated when starting the API. Because of this, invalid configuration
(e.g. missing or invalid TLS certificates) would not be detected
when using `dockerd --validate`.
This patch moves creation of the validation earlier, so that it's
validated as part of `dockerd --validate`.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Previously, hosts were de-duplicated and normalized when starting
the API server (in `loadListeners()`), which meant that errors could
occur in that step (but not detected when using `dockerd --validate`),
as well as the list of hosts in the config not matching what would
actually be used (i.e., if duplicates were present).
This patch extracts the de-duplicating to a separate function, and
executes it as part of loading the daemon configuration, so that we
can fail early.
Moving this code also showed that some of this validation depended
on `newAPIServerConfig()` modifying the configuration (adding an
empty host if none was set) in order to have the parsing set a
default. This code was moved elsewhere, but a TODO comment added
as this logic is somewhat sketchy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- un-export `daemonOptions.InstallFlags()`; `daemonOptions` itself isn't exported,
not exported, and `InstallFlags()` isn't matching any interface and only used
internally.
- un-export `daemonOptions.SetDefaultOptions()` and remove the `flags` argument
as we were passing `daemonOptions.flags` as argument on a method attached to
`daemonOptions`, which was somewhat backwards. While at it, also removing an
intermediate variable that wasn't needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Log-level validation was previously performed when configuring the daemon-logs;
this moves the validation to config.Validate() so that we can catch invalid
settings when running dockerd --validate.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was introduced in 85572cac14, where I
probably forgot to remove this code from an earlier iteration (I decided
that having an explicit `configureCertsDir()` function call for this would
make it more transparent that we're re-configuring a default).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Logging boolean was unconditionally set to true and ignored in all locations,
except for enabling the debugging middleware, which was also gated by the active
logrus logging level.
While it could make sense to have a Loglevel option configured on the API server,
we don't have this currently, and to make that actually useful, that config would
need to be tollerated by all locations that produce logs (which isn't the case
either).
Looking at the history of this option; a boolean to disable logging was originally
added in commit c423a790d6, which hard-coded it to
"disabled" in a test, and "enabled" for the API server outside of tests (before
that commit, logging was always enabled).
02ddaad5d9 and 5c42b2b512
changed the hard-coded values to be configurable through a `Logging` env-var (env-
vars were used _internally_ at the time to pass on options), which later became
a configuration struct in a0bf80fe03.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This feature requires experimental mode to be enabled, so mentioning that
in the flag description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The registry package contained code to automatically set the CertsDir() path,
based on wether or not the daemon was running in rootlessmode. In doing so,
it made use of the `pkg/rootless.RunningWithRootlessKit()` utility.
A recent change in de6732a403 added additional
functionality in the `pkg/rootless` package, introducing a dependency on
`github.com/rootless-containers/rootlesskit`. Unfortunately, the extra
dependency also made its way into the docker cli, which also uses the
registry package.
This patch introduces a new `SetCertsDir()` function, which allows
the default certs-directory to be overridden, and updates the daemon
to configure this location during startup.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the plugin section from the containerd configuration file
(`/var/run/docker/containerd/containerd.toml`) that is generated when
starting containerd as child process;
```toml
[plugins]
[plugins.linux]
shim = "containerd-shim"
runtime = "runc"
runtime_root = "/var/lib/docker/runc"
no_shim = false
shim_debug = true
```
This configuration doesn't appear to be used since commit:
0b14c2b67a, which switched the default runtime
to to io.containerd.runc.v2.
Note that containerd itself uses `containerd-shim` and `runc` as default
for `shim` and `runtime` v1, so omitting that configuration doesn't seem
to make a difference.
I'm slightly confused if any of the other options in this configuration were
actually used: for example, even though `runtime_root` was configured to be
`/var/lib/docker/runc`, when starting a container with that coniguration set
on docker 19.03, `/var/lib/docker/runc` doesn't appear to exist:
```console
$ docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
098baa4cb0e7 nginx:alpine "/docker-entrypoint.…" 59 minutes ago Up 59 minutes 80/tcp foo
$ ls /var/lib/docker/runc
ls: /var/lib/docker/runc: No such file or directory
$ ps auxf
PID USER TIME COMMAND
1 root 0:00 sh
16 root 0:11 dockerd --debug
26 root 0:09 containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
234 root 0:00 containerd-shim -namespace moby -workdir /var/lib/docker/containerd/daemon/io.containerd.runtime.v1.linux/moby/09
251 root 0:00 nginx: master process nginx -g daemon off;
304 101 0:00 nginx: worker process
...
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Perform the validation when the daemon starts instead of performing these
validations for each individual container, so that we can fail early.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Windows Server 2016 (RS1) reached end of support, and Docker Desktop requires
Windows 10 V19H2 (version 1909, build 18363) as a minimum.
This patch makes Windows Server RS5 / ltsc2019 (build 17763) the minimum version
to run the daemon, and removes some hacks for older versions of Windows.
There is one check remaining that checks for Windows RS3 for a workaround
on older versions, but recent changes in Windows seemed to have regressed
on the same issue, so I kept that code for now to check if we may need that
workaround (again);
085c6a98d5/daemon/graphdriver/windows/windows.go (L319-L341)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was originally added to solve a CLI usability issue related to `docker-machine` and `docker` (explicitly *not* `dockerd`) -- the "docker/cli" repository has a separate copy of this entire `opts` package, so isn't even using this implementation.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
The daemon can print the proxy configuration as part of error-messages,
and when reloading the daemon configuration (SIGHUP). Make sure that
the configuration is sanitized before printing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows configuring the daemon's proxy server through the daemon.json con-
figuration file or command-line flags configuration file, in addition to the
existing option (through environment variables).
Configuring environment variables on Windows to configure a service is more
complicated than on Linux, and adding alternatives for this to the daemon con-
figuration makes the configuration more transparent and easier to use.
The configuration as set through command-line flags or through the daemon.json
configuration file takes precedence over env-vars in the daemon's environment,
which allows the daemon to use a different proxy. If both command-line flags
and a daemon.json configuration option is set, an error is produced when starting
the daemon.
Note that this configuration is not "live reloadable" due to Golang's use of
`sync.Once()` for proxy configuration, which means that changing the proxy
configuration requires a restart of the daemon (reload / SIGHUP will not update
the configuration.
With this patch:
cat /etc/docker/daemon.json
{
"http-proxy": "http://proxytest.example.com:80",
"https-proxy": "https://proxytest.example.com:443"
}
docker pull busybox
Using default tag: latest
Error response from daemon: Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
docker build .
Sending build context to Docker daemon 89.28MB
Step 1/3 : FROM golang:1.16-alpine AS base
Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
Integration tests were added to test the behavior:
- verify that the configuration through all means are used (env-var,
command-line flags, damon.json), and used in the expected order of
preference.
- verify that conflicting options produce an error.
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds support for 2 runtimes on Windows, one that uses the built-in
HCSv1 integration and another which uses containerd with the runhcs
shim.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Perhaps the testutils package in the past had an `init()` function to set up
specific things, but it no longer has. so these imports were doing nothing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit b237189e6c implemented an option to
set the default seccomp profile in the daemon configuration. When that PR
was reviewed, it was discussed to have the option accept the path to a custom
profile JSON file; https://github.com/moby/moby/pull/26276#issuecomment-253546966
However, in the implementation, the special "unconfined" value was not taken into
account. The "unconfined" value is meant to disable seccomp (more factually:
run with an empty profile).
While it's likely possible to achieve this by creating a file with an an empty
(`{}`) profile, and passing the path to that file, it's inconsistent with the
`--security-opt seccomp=unconfined` option on `docker run` and `docker create`,
which is both confusing, and makes it harder to use (especially on Docker Desktop,
where there's no direct access to the VM's filesystem).
This patch adds the missing check for the special "unconfined" value.
Co-authored-by: Tianon Gravi <admwiggin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's the only location where this is used, and it's quite specific
to dockerd (not really a reusable function for external use), so
moving it into that package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "quiet" argument was only used in a single place (at daemon startup), and
every other use had to pass "false" to prevent this function from logging
warnings.
Now that SysInfo contains the warnings that occurred when collecting the
system information, we can make leave it up to the caller to use those
warnings (and log them if wanted).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since this command is part of the official distribution and even
required for tests, let's move this up to the main cmd's.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#36911
If config file is invalid we'll exit anyhow, so this just prevents
the daemon from starting if the configuration is fine.
Mainly useful for making config changes and restarting the daemon
iff the config is valid.
Signed-off-by: Rich Horwood <rjhorwood@apple.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
The LCOW implementation in dockerd has been deprecated in favor of re-implementation
in containerd (in progress). Microsoft started removing the LCOW V1 code from the
build dependencies we use in Microsoft/opengcs (soon to be part of Microsoft/hcshhim),
which means that we need to start removing this code.
This first step removes the lcow graphdriver, the LCOW initialization code, and
some LCOW-related utilities.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as domain.com, registry.com, mytest.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signal systemd when we start shutting down to complement the "READY" notify
that was originally implemented in 97088ebef7
From [sd_notify(3)](https://www.freedesktop.org/software/systemd/man/sd_notify.html#STOPPING=1)
> STOPPING=1
> Tells the service manager that the service is beginning its shutdown. This is useful
> to allow the service manager to track the service's internal state, and present it to
> the user.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer does not guarantee a stable API, and is not intended
for external consumers.
this patch replaces some uses of libcontainer/cgroups with
containerd/cgroups.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon expects to manage/handle everything going into the containerd namespace it uses, and things break when it shares that namespace with a second instance, so we should expose these flags and expect users that want two daemons sharing a containerd instance to use separate namespaces for them.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
dockerd currently sets the oom-score-adjust itself. This functionality
was added when we did not yet run dockerd as a systemd service.
Now that we do, it's better to instead have systemd handle this.
Keeping the option itself for situations where dockerd is started
manually or without using systemd.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/spf13/cobra/compare/v0.0.3...v1.0.0
Notable Changes
- Fish completion (including support for Go custom completion)
- API (urgent): Rename BashCompDirectives to ShellCompDirectives
- Remove/replace SetOutput on Command - deprecated
- Custom completions coded in Go (instead of Bash)
- Partial Revert of 922
- Correct documentation for InOrStdin
- Apply formatting to templates
- Revert change so help is printed on stdout again
- Update md2man to v2.0.0
- update viper to v1.4.0
- Update cmd/root.go example in README.md
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
