The `digest` data type, used throughout docker for image verification
and identity, has been broken out into `opencontainers/go-digest`. This
PR updates the dependencies and moves uses over to the new type.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
When using both `--secret-rm` and `--secret-add` on `docker service update`,
`--secret-rm` was always performed last. This made it impossible to update
a secret that was already in use on a service (for example, to change
it's permissions, or mount-location inside the container).
This patch changes the order in which `rm` and `add` are performed,
allowing updating a secret in a single `docker service update`.
Before this change, the `rm` was always performed "last", so the secret
was always removed:
$ echo "foo" | docker secret create foo -f -
foo
$ docker service create --name myservice --secret foo nginx:alpine
62xjcr9sr0c2hvepdzqrn3ssn
$ docker service update --secret-rm foo --secret-add source=foo,target=foo2 myservice
myservice
$ docker service inspect --format '{{ json .Spec.TaskTemplate.ContainerSpec.Secrets }}' myservice | jq .
null
After this change, the `rm` is performed _first_, allowing users to
update a secret without updating the service _twice_;
$ echo "foo" | docker secret create foo -f -
1bllmvw3a1yaq3eixqw3f7bjl
$ docker service create --name myservice --secret foo nginx:alpine
lr6s3uoggli1x0hab78glpcxo
$ docker service update --secret-rm foo --secret-add source=foo,target=foo2 myservice
myservice
$ docker service inspect --format '{{ json .Spec.TaskTemplate.ContainerSpec.Secrets }}' myservice | jq .
[
{
"File": {
"Name": "foo2",
"UID": "0",
"GID": "0",
"Mode": 292
},
"SecretID": "tn9qiblgnuuut11eufquw5dev",
"SecretName": "foo"
}
]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… or could be in `opts` package. Having `runconfig/opts` and `opts`
doesn't really make sense and make it difficult to know where to put
some code.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
`--publish-add 8081:81 --publish-add 8082:82 --publish-rm 80
--publish-rm 81/tcp --publish-rm 82/tcp` would thus result in 81 and
82 to be published.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently `--publish-rm` only accepts `<TargetPort>` or `<TargetPort>[/Protocol]`
though there are some confusions.
Since `--publish-add` accepts `<PublishedPort>:<TargetPort>[/Protocol]`, some user
may provide `--publish-rm 80:80`. However, there is no error checking so the incorrect
provided argument is ignored silently.
This fix adds the check to make sure `--publish-rm` only accepts `<TargetPort>[/Protocol]`
and returns error if the format is invalid.
The `--publish-rm` itself may needs to be revisited to have a better UI/UX experience,
see discussions on:
https://github.com/docker/swarmkit/issues/1396https://github.com/docker/docker/issues/25200#issuecomment-236213242https://github.com/docker/docker/issues/25338#issuecomment-240787002
This fix is short term measure so that end users are not misled by the silently ignored error
of `--publish-rm`.
This fix is related to (but is not a complete fix):
https://github.com/docker/swarmkit/issues/1396
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
When UpdateStatus was not present, the empty values of the timestamps
would be present:
"UpdateStatus": {
"StartedAt": "0001-01-01T00:00:00Z",
"CompletedAt": "0001-01-01T00:00:00Z"
}
To fix this, make the timestamps pointers, so they can be set to nil
when they should not be shown.
Also make UpdateStatus itself a pointer, so an empty object does not
show up when there is no UpdateStatus.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Modify the service update and create APIs to return optional warning
messages as part of the response. Populate these messages with an
informative reason when digest resolution fails.
This is a small API change, but significantly improves the UX. The user
can now get immediate feedback when they've specified a nonexistent
image or unreachable registry.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
use secret store interface instead of embedded secret data into container
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
A recent PR added `(ns|us|ms|s|m|h)` to the descriptions of some
duration options, but not all. Add it to the remaining options for
consistency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- use Filters instead of Filter for secret list
- UID, GID -> string
- getSecrets -> getSecretsByName
- updated test case for secrets with better source
- use golang.org/x/context instead of context
- for grpc conversion allocate with make
- check for nil with task.Spec.GetContainer()
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
- use /secrets for swarm secret create route
- do not specify omitempty for secret and secret reference
- simplify lookup for secret ids
- do not use pointer for secret grpc conversion
Signed-off-by: Evan Hazlett <ejhazlett@gmail.com>
