This is just noise due to timing. I picked `> 2` just based on
logs from tests I've seen there's always 1 or 2.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The test-integration/test=integration-cli directory contains
a directory for each daemon that was created during the integration
tests, which makes it a long list to browse through. In addition,
some tests spin up multiple daemons, and when debugging test-failures,
the daemon-logs often have to be looked at together.
This patch organizes the bundl directory to group daemon storage
locationos per test, making it easier to find information about
all the daemons that were used in a specific test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This improves the select logic for the restart tests or starting the
daemon in general. With the way the ticker and select was setup, it was
possible for only the timeout to be displayed and not the wait errors.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Refactored exiting logic on way that layers are first marked to be under
removal so if actual removal fails they can be found from disk and
cleaned up.
Full garbage collector will be implemented as part of containerd
migration.
Signed-off-by: Olli Janatuinen <olli.janatuinen@gmail.com>
As of Go 1.12, the `testing` package panics if a goroutine logs to a
`testing.T` after the relevant test has completed. This was not
documented as a change at all; see the commit
95d06ab6c982f58b127b14a52c3325acf0bd3926 in the Go repository for the
relevant change.
At any point in the integration tests, tests could panic with the
message "Log in goroutine after TEST_FUNCTION has completed". This was
exacerbated by less direct logging I/O, e.g. running `make test` with
its output piped instead of attached to a TTY.
The most common cause of panics was that there was a race condition
between an exit logging goroutine and the `StopWithError` method:
`StopWithError` could return, causing the calling test method to return,
causing the `testing.T` to be marked as finished, before the goroutine
could log that the test daemon had exited. The fix is simple: capture
the result of `cmd.Wait()`, _then_ log, _then_ send the captured
result over the `Wait` channel. This ensures that the message is
logged before `StopWithError` can return, blocking the test method
so that the target `testing.T` is not marked as finished.
Signed-off-by: Daniel Sweet <danieljsweet@icloud.com>
This adds both a daemon-wide flag and a container creation property:
- Set the `CgroupnsMode: "host|private"` HostConfig property at
container creation time to control what cgroup namespace the container
is created in
- Set the `--default-cgroupns-mode=host|private` daemon flag to control
what cgroup namespace containers are created in by default
- Set the default if the daemon flag is unset to "host", for backward
compatibility
- Default to CgroupnsMode: "host" for client versions < 1.40
Signed-off-by: Rob Gulewich <rgulewich@netflix.com>
This adds some logs, handles timers better, and sets a request timeout
for the ping request.
I'm not sure the ticker in that loop is what we really want since the
ticker keeps ticking while we are (attempting) to make a request... but
I opted to not change that for now.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Minor improvement, but makes defining a list of options
a bit cleaner, and more descriptive;
Before:
opts := make([]func(*client.Client) error, 0)
After:
opts := make([]client.Opt, 0)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Allow specifying environment variables when installing an engine plugin
as a Swarm service. Invalid environment variable entries (without an
equals (`=`) char) will be ignored.
Signed-off-by: Sune Keller <absukl@almbrand.dk>
There's no need to try to re-build the test images if they already
exist. This change makes basically no difference to the upstream
integration test-suite running, but for users who want to run the
integration-cli suite on a host machine (such as distributions doing
tests) this change allows images to be pre-loaded such that compilers
aren't needed on the test machine.
However, this does remove the accidental re-compilation of nnp-test, as
well as handling errors far more cleanly (previously if an error
occurred during a test build, further tests won't attempt to rebuild
it).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Some tests were skipped if the local daemon did not have
experimental features enabled; at the same time, some tests
unconditionally created a new (experimental) daemon, even if
the local daemon already had experimental enabled.
This patch;
- Checks if the "testEnv" is an experimental Linux daemon
- If not, and the daemon is running locally; spin up a new
experimental daemon to be used during the test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Monitoring systems and load balancers are usually configured to use HEAD
requests for health monitoring. The /_ping endpoint currently does not
support this type of request, which means that those systems have fallback
to GET requests.
This patch adds support for HEAD requests on the /_ping endpoint.
Although optional, this patch also returns `Content-Type` and `Content-Length`
headers in case of a HEAD request; Refering to RFC 7231, section 4.3.2:
The HEAD method is identical to GET except that the server MUST NOT
send a message body in the response (i.e., the response terminates at
the end of the header section). The server SHOULD send the same
header fields in response to a HEAD request as it would have sent if
the request had been a GET, except that the payload header fields
(Section 3.3) MAY be omitted. This method can be used for obtaining
metadata about the selected representation without transferring the
representation data and is often used for testing hypertext links for
validity, accessibility, and recent modification.
A payload within a HEAD request message has no defined semantics;
sending a payload body on a HEAD request might cause some existing
implementations to reject the request.
The response to a HEAD request is cacheable; a cache MAY use it to
satisfy subsequent HEAD requests unless otherwise indicated by the
Cache-Control header field (Section 5.2 of [RFC7234]). A HEAD
response might also have an effect on previously cached responses to
GET; see Section 4.3.5 of [RFC7234].
With this patch applied, either `GET` or `HEAD` requests work; the only
difference is that the body is empty in case of a `HEAD` request;
curl -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:35:16 GMT
Content-Length: 2
Content-Type: text/plain; charset=utf-8
OK
curl --head -i --unix-socket /var/run/docker.sock http://localhost/_ping
HTTP/1.1 200 OK
Api-Version: 1.40
Cache-Control: no-cache, no-store, must-revalidate
Content-Length: 0
Content-Type: text/plain; charset=utf-8
Docker-Experimental: false
Ostype: linux
Pragma: no-cache
Server: Docker/dev (linux)
Date: Mon, 14 Jan 2019 12:34:15 GMT
The client is also updated to use `HEAD` by default, but fallback to `GET`
if the daemon does not support this method.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
By default, exec uses the environment of the current process, however,
if `exec.Env` is not `nil`, the environment is discarded:
e73f489494/src/os/exec/exec.go (L57-L60)
> If Env is nil, the new process uses the current process's environment.
When adding a new environment variable, prepend the current environment,
to make sure it is not discarded.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit contains changes to configure DataPathPort
option. By default we use 4789 port number. But this commit
will allow user to configure port number during swarm init.
DataPathPort can't be modified after swarm init.
Signed-off-by: selansen <elango.siva@docker.com>
When starting docker daemons for swarm testing, we disable iptables
and use lo for communication (in order to avoid network conflicts).
The problem is, these options are lost on restart, that can lead
to any sorts of network conflicts and thus connectivity issues
between swarm nodes.
Fix this. This does not fix issues with swarm test failures, but
it seems they appear are less often after this one.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
A timer is leaking on every daemon start and stop.
Probably nothing major, but given the amount of
daemon starts/stops during tests, it's better to
be accurate about it.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
1. Using MNT_FORCE flag does not make sense for nsfs. Using MNT_DETACH
though might help.
2. When -check.vv is added to TESTFLAGS, there are a lot of messages
like this one:
> unmount of /tmp/dxr/d847fd103a4ba/netns failed: invalid argument
and some like
> unmount of /tmp/dxr/dd245af642d94/netns failed: no such file or directory
The first one means directory is not a mount point, the second one
means it's gone. Do ignore both of these.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This feature allows user to specify list of subnets for global
default address pool. User can configure subnet list using
'swarm init' command. Daemon passes the information to swarmkit.
We validate the information in swarmkit, then store it in cluster
object. when IPAM init is called, we pass subnet list to IPAM driver.
Signed-off-by: selansen <elango.siva@docker.com>
Else it is harder to understand where we've failed in StartWithLogFile
We have an errror:
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
[d42ce729d0b06] waiting for daemon to start
docker_cli_userns_test.go:27:
s.d.StartWithBusybox(c, "--userns-remap", "default")
/go/src/github.com/docker/docker/internal/test/daemon/daemon.go:203:
t.Fatalf("Error starting daemon with arguments: %v", args)
... Error: Error starting daemon with arguments: [--userns-remap default]
[d42ce729d0b06] exiting daemon
Likely it is "[..] Daemon exited during startup" case, but these error
message is lost
Also we lose the error returned by waiting daemon so also add it
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
