The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
Generate a hash chain involving the image configuration, layer digests,
and parent image hashes. Use the digests to compute IDs for each image
in a manifest, instead of using the remotely specified IDs.
To avoid breaking users' caches, check for images already in the graph
under old IDs, and avoid repulling an image if the version on disk under
the legacy ID ends up with the same digest that was computed from the
manifest for that image.
When a calculated ID already exists in the graph but can't be verified,
continue trying SHA256(digest) until a suitable ID is found.
"save" and "load" are not changed to use a similar scheme. "load" will
preserve the IDs present in the tar file.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
* Moving Network Remote APIs out of experimental
* --net can now accept user created networks using network drivers/plugins
* Removed the experimental services concept and --default-network option
* Neccessary backend changes to accomodate multiple networks per container
* Integration Tests
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
- The build-time variables are passed as environment-context for command(s)
run as part of the RUN primitve. These variables are not persisted in environment of
intermediate and final images when passed as context for RUN. The build environment
is prepended to the intermediate continer's command string for aiding cache lookups.
It also helps with build traceability. But this also makes the feature less secure from
point of view of passing build time secrets.
- The build-time variables also get used to expand the symbols used in certain
Dockerfile primitves like ADD, COPY, USER etc, without an explicit prior definiton using a
ENV primitive. These variables get persisted in the intermediate and final images
whenever they are expanded.
- The build-time variables are only expanded or passed to the RUN primtive if they
are defined in Dockerfile using the ARG primitive or belong to list of built-in variables.
HTTP_PROXY, HTTPS_PROXY, http_proxy, https_proxy, FTP_PROXY and NO_PROXY are built-in
variables that needn't be explicitly defined in Dockerfile to use this feature.
Signed-off-by: Madhav Puri <madhav.puri@gmail.com>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This fixes two problems:
1. docker run --device /dev/sda:rw ubuntu bash doesn't work
2. --device /dev/zero:/dev/noro:ro doesn't show clear error message,
but fail when writing to cgroup file.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
This reverts commit 40b71adee3.
Original commit (for which this is effectively a rebased version) is
72a500e9e5 and was provided by Lei Jitang
<leijitang@huawei.com>.
Signed-off-by: Tim Dettrick <t.dettrick@uq.edu.au>
It may happen that host system settings are changed while the daemon is running.
This will cause errors at libcontainer level when starting a container with a
particular hostConfig (e.g. hostConfig with memory swappiness but the memory
cgroup was umounted).
This patch adds an hostConfig check on container start to prevent the daemon
from even calling libcontainer with the wrong configuration as we're already
doing on container's creation).
Signed-off-by: Antonio Murdaca <runcom@linux.com>
(cherry picked from commit 0d2628cdf1)
This patch creates a new cli package that allows to combine both client
and daemon commands (there is only one daemon command: docker daemon).
The `-d` and `--daemon` top-level flags are deprecated and a special
message is added to prompt the user to use `docker daemon`.
Providing top-level daemon-specific flags for client commands result
in an error message prompting the user to use `docker daemon`.
This patch does not break any old but correct usages.
This also makes `-d` and `--daemon` flags, as well as the `daemon`
command illegal in client-only binaries.
Signed-off-by: Tibor Vass <tibor@docker.com>
As suggested in https://github.com/docker/docker/pull/14004/files#r34022527
The concern there is we can't differentiate whether user explicitly
asked for an invalid value of -1 or he did not specify anything.
I don't think this would be a problem, because:
- like all other default values like zero, we can't differentiate
user specify it or not, most of which, zeros are also invalid, so
default is default, we show these default values in help info,
so users would know if they set value as default, it'll be like
they set nothing.
- we can't do this kind of string check in REST api request, so
it'll make the behave different from docker command and RESTapi.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Closes#14621
This one grew to be much more than I expected so here's the story... :-)
- when a bad port string (e.g. xxx80) is passed into container.create()
via the API it wasn't being checked until we tried to start the container.
- While starting the container we trid to parse 'xxx80' in nat.Int()
and would panic on the strconv.ParseUint(). We should (almost) never panic.
- In trying to remove the panic I decided to make it so that we, instead,
checked the string during the NewPort() constructor. This means that
I had to change all casts from 'string' to 'Port' to use NewPort() instead.
Which is a good thing anyway, people shouldn't assume they know the
internal format of types like that, in general.
- This meant I had to go and add error checks on all calls to NewPort().
To avoid changing the testcases too much I create newPortNoError() **JUST**
for the testcase uses where we know the port string is ok.
- After all of that I then went back and added a check during container.create()
to check the port string so we'll report the error as soon as we get the
data.
- If, somehow, the bad string does get into the metadata we will generate
an error during container.start() but I can't test for that because
the container.create() catches it now. But I did add a testcase for that.
Signed-off-by: Doug Davis <dug@us.ibm.com>
- Refactor opts.ValidatePath and add an opts.ValidateDevice
ValidePath will now accept : containerPath:mode, hostPath:containerPath:mode
and hostPath:containerPath.
ValidateDevice will have the same behavior as current.
- Refactor opts.ValidateEnv, opts.ParseEnvFile
Environment variables will now be validated with the following
definition :
> Environment variables set by the user must have a name consisting
> solely of alphabetics, numerics, and underscores - the first of
> which must not be numeric.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Memory swappiness option takes 0-100, and helps to tune swappiness
behavior per container.
For example, When a lower value of swappiness is chosen
the container will see minimum major faults. When no value is
specified for memory-swappiness in docker UI, it is inherited from
parent cgroup. (generally 60 unless it is changed).
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
There is no reason to error out or not do what the user expects when -i
is specified on the cli. We should always attach to the stdin of the
container in this situation.
Closes#14390
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
By convention /pkg is safe to use from outside the docker tree, for example
if you're building a docker orchestrator.
/nat currently doesn't have any dependencies outside of /pkg, so it seems
reasonable to move it there.
This rename was performed with:
```
gomvpkg -vcs_mv_cmd="git mv {{.Src}} {{.Dst}}" \
-from github.com/docker/docker/nat \
-to github.com/docker/docker/pkg/nat
```
Signed-off-by: Peter Waller <p@pwaller.net>
This commit makes use of the CNM model supported by LibNetwork and
provides an ability to let a container to publish a specified service.
Behind the scenes, if a service with the given name doesnt exist, it is
automatically created on appropriate network and attach the container.
Signed-off-by: Alessandro Boch <aboch@docker.com>
Signed-off-by: Madhu Venugopal <madhu@docker.com>
This commit also brings in the ability to specify a default network and its
corresponding driver as daemon flags. This helps in existing clients to
make use of newer networking features provided by libnetwork.
Signed-off-by: Madhu Venugopal <madhu@docker.com>
Labels are metadata that apply to a particular resource: image,
container, maybe volumes and networks in the future. We shouldn't have
containers inherit from its image labels: they are not the same obejcts,
and labels cannot be interpreted in the way.
It remains possible to apply metadata to an image using the LABEL
Dockerfile instruction, to query them using `docker inspect <img>`, or
to filter images on them using `docker images --filter <key>=<value>`.
Fixes#13770.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
This patch is extending the qualifiers on the -v command to allow
an admin to tell the system to relabel, content. There might be a
need for something similar for changing the DAC Permissions.
Signed-off-by: Jessica Frazelle <princess@docker.com>
Signed by all authors:
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
Signed-off-by: Jeff Lindsay <progrium@gmail.com>
Signed-off-by: Alexander Morozov <lk4d4@docker.com>
Signed-off-by: Luke Marsden <luke@clusterhq.com>
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Updated Dockerfile to satisfy libnetwork GOPATH requirements.
- Reworked daemon to allocate network resources using libnetwork.
- Reworked remove link code to also update network resources in libnetwork.
- Adjusted the exec driver command population to reflect libnetwork design.
- Adjusted the exec driver create command steps.
- Updated a few test cases to reflect the change in design.
- Removed the dns setup code from docker as resolv.conf is entirely managed
in libnetwork.
- Integrated with lxc exec driver.
Signed-off-by: Jana Radhakrishnan <mrjana@docker.com>
When RUN returns with a non-zero return code it prints the command
that was executed as a Go []string:
```
INFO[0000] The command &{[/bin/sh -c noop a1 a2]} returned a non-zero code: 127
```
instead it should look like this:
```
INFO[0000] The command "/bin/sh -c noop a1 a2" returned a non-zero code: 127
```
Signed-off-by: Doug Davis <dug@us.ibm.com>
ParseRestartPolicy is useful function for third party go programs to use
so that they can parse the restart policy in the same way that Docker
does
Signed-off-by: Darren Shepherd <darren@rancher.com>
Adds more documentation for labels and adds the label instruction to the
man-pages.
Also included is a document called "Labels - custom meta-data in Docker"
in the user-guide, this is still a work-in-progress I started to describe
the "namespaces" conventions, an example on storing structured data.
I ran a bit "out of steam" (writers block?) on that document, but kept
it in (for now), in case it still ends up useful.
The Remote API documentation changes will need to be moved to the
docker_remote_api_v1.18.md document when rebasing the whole PR.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Darren Shepherd <darren@rancher.com>
Save "LABEL" field in Dockerfile into image content.
This will allow a user to save user data into an image, which
can later be retrieved using:
docker inspect IMAGEID
I have copied this from the "Comment" handling in docker images.
We want to be able to add Name/Value data to an image to describe the image,
and then be able to use other tools to look at this data, to be able to do
security checks based on this data.
We are thinking about adding version names,
Perhaps listing the content of the dockerfile.
Descriptions of where the code came from etc.
This LABEL field should also be allowed to be specified in the
docker import --change LABEL:Name=Value
docker commit --change LABEL:Name=Value
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
and add a testcase to catch this in the future.
While in there I also:
- removed extra periods from the few options that had them (new test)
- made the --filter option consistent across all command
Signed-off-by: Doug Davis <dug@us.ibm.com>
The -u/--user flag optionaly takes a group/gui. This change documents this behavior and specifies the complete format of the value.
Signed-off-by: Jeff Nickoloff <jeff@allingeek.com>
Added a missed semi-colon for consistency with other messages.
Signed-off-by: Jeff Nickoloff <jeff@allingeek.com>
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
Under the restart policy "--restart=no", there is no record about it
in the information from docker inspect.
To keep it consistent around the three(maybe more in the future) restart
policies and distinguish with no restart policy specified cases, it's
worth to record it even though it is the default restart policy which
will not restart the container.
Signed-off-by: Hu Keping <hukeping@huawei.com>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
--help and help are successful commands so output should not go to error.
QE teams have requested this change, also users doing docker help | less
or docker run --help | less would expect this to work.
Usage statement should only be printed when the user asks for it.
Errors should print error message and then suggest the docker COMMAND --help
command to see usage information.
The current behaviour causes the user to have to search for the error message
and sometimes scrolls right off the screen. For example a error on a
"docker run" command is very difficult to diagnose.
Finally erros should always exit with a non 0 exit code, if the user
makes a CLI error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
as noted in https://github.com/boot2docker/boot2docker/issues/690
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
These settings need to be in the HostConfig so that they are not
committed to an image and cannot introduce a security issue.
We can safely move this field from the Config to the HostConfig
without any regressions because these settings are consumed at container
created and used to populate fields on the Container struct. Because of
this, existing settings will be honored for containers already created
on a daemon with custom security settings and prevent values being
consumed via an Image.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Conflicts:
daemon/create.go
changing config to hostConfig was required to fix the
build
Adds pertitent information about what is expected in the json payload
and comments out unsupported (exec) features in runConfig.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
security-opts will allow you to customise the security subsystem.
For example the labeling system like SELinux will run on a container.
--security-opt="label:user:USER" : Set the label user for the container
--security-opt="label:role:ROLE" : Set the label role for the container
--security-opt="label:type:TYPE" : Set the label type for the container
--security-opt="label:level:LEVEL" : Set the label level for the container
--security-opt="label:disabled" : Turn off label confinement for the container
Since we are passing a list of string options instead of a space separated
string of options, I will change function calls to use InitLabels instead of
GenLabels. Genlabels interface is Depracated.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Removed runconfig.ParseSubcommand, changed it to runconfig.Parse and editted related tests and modules
Signed-off-by: Oh Jinkyun <tintypemolly@gmail.com>
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
This exposes the already existing "create container" operation. It is
very similar to "docker run -d" except it doesn't actually start the
container, but just prepares it. It can then be manually started using
"docker start" at any point.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Conflicts:
api/client/commands.go
runconfig/parse.go
server/container.go
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
--help and help are successful commands so output should not go to error.
QE teams have requested this change, also users doing docker help | less
or docker run --help | less would expect this to work.
Usage statement should only be printed when the user asks for it.
Errors should print error message and then suggest the docker COMMAND --help
command to see usage information.
The current behaviour causes the user to have to search for the error message
and sometimes scrolls right off the screen. For example a error on a
"docker run" command is very difficult to diagnose.
Finally erros should always exit with a non 0 exit code, if the user
makes a CLI error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
functions to pkg/parsers/kernel, and parsing filters to
pkg/parsers/filter. Adjust imports and package references.
Docker-DCO-1.1-Signed-off-by: Erik Hollensbe <github@hollensbe.org> (github: erikh)
We add a --device flag which can be used like:
docker run --device /dev/sda:/dev/xvda:rwm ubuntu /bin/bash
To allow the container to have read write permissions to access the host's /dev/sda via a node named /dev/xvda in the container.
Note: Much of this code was written by Dinesh Subhraveti dineshs@altiscale.com (github: dineshs-altiscale) and so he deserves a ton of credit.
Docker-DCO-1.1-Signed-off-by: Timothy <timothyhobbs@seznam.cz> (github: timthelion)
In that case /etc/resolv.conf will be generated with no search
option. Usage: --dns-search=.
Docker-DCO-1.1-Signed-off-by: Fabio Falci <fabiofalci@gmail.com> (github: fabiofalci)
We discussed this at the docker plumbers meetup and for tools and
working on the system for things like boot2docker and coreos this is
needed. You can already bypass this check so we felt it is ok to start
allowing this feature.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@docker.com> (github: crosbymichael)
Docker's --sig-proxy option sends all signals but one to a container. The
exception s SIGCHLD, which is deliberately ignored as it doesn't make sense to
send such a signal to a process in a container. Documentation updates will make
this less confusing if anyone does attempt to do this.
Docker-DCO-1.1-Signed-off-by: Matt Heon <mheon@redhat.com> (github: mheon)
Also make sure we copy the joining containers hosts and resolv.conf with
the hostname if we are joining it's network stack.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
This also migrates the volumes from integration tests into the new cli
integration test framework.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
The local resolver warning needed to be moved at daemon start because it
was only show for the first container started anyways before having a
default value set.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
In order to handle special configuration for different drivers we
make the Config field a map to string array. This lets
us use it for lxc, by using the "lxc" key for those, and we can
later extend it easily for other backend-specific options.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
docker will run the process(es) within the container with an SELinux label and will label
all of the content within the container with mount label. Any temporary file systems
created within the container need to be mounted with the same mount label.
The user can override the process label by specifying
-Z With a string of space separated options.
-Z "user=unconfined_u role=unconfined_r type=unconfined_t level=s0"
Would cause the process label to run with unconfined_u:unconfined_r:unconfined_t:s0"
By default the processes will run execute within the container as svirt_lxc_net_t.
All of the content in the container as svirt_sandbox_file_t.
The process mcs level is based of the PID of the docker process that is creating the container.
If you run the container in --priv mode, the labeling will be disabled.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
