This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
(cherry picked from commit f695e98cb7)
Signed-off-by: Tibor Vass <tibor@docker.com>
The `--rootless` flag had a couple of issues:
* #38702: euid=0, $USER="root" but no access to cgroup ("rootful" Docker in rootless Docker)
* #39009: euid=0 but $USER="docker" (rootful boot2docker)
To fix#38702, XDG dirs are ignored as in rootful Docker, unless the
dockerd is directly running under RootlessKit namespaces.
RootlessKit detection is implemented by checking whether `$ROOTLESSKIT_STATE_DIR` is set.
To fix#39009, the non-robust `$USER` check is now completely removed.
The entire logic can be illustrated as follows:
```
withRootlessKit := getenv("ROOTLESSKIT_STATE_DIR")
rootlessMode := withRootlessKit || cliFlag("--rootless")
honorXDG := withRootlessKit
useRootlessKitDockerProxy := withRootlessKit
removeCgroupSpec := rootlessMode
adjustOOMScoreAdj := rootlessMode
```
Close#39024Fix#38702#39009
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
(cherry picked from commit 3518383ed9)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`defer r.WaitTimeout(10s)` was in a wrong place and had caused the
daemon to hang for 10 seconds.
Fix#39025
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the first step in refactoring moby (dockerd) to use containerd on Windows.
Similar to the current model in Linux, this adds the option to enable it for runtime.
It does not switch the graphdriver to containerd snapshotters.
- Refactors libcontainerd to a series of subpackages so that either a
"local" containerd (1) or a "remote" (2) containerd can be loaded as opposed
to conditional compile as "local" for Windows and "remote" for Linux.
- Updates libcontainerd such that Windows has an option to allow the use of a
"remote" containerd. Here, it communicates over a named pipe using GRPC.
This is currently guarded behind the experimental flag, an environment variable,
and the providing of a pipename to connect to containerd.
- Infrastructure pieces such as under pkg/system to have helper functions for
determining whether containerd is being used.
(1) "local" containerd is what the daemon on Windows has used since inception.
It's not really containerd at all - it's simply local invocation of HCS APIs
directly in-process from the daemon through the Microsoft/hcsshim library.
(2) "remote" containerd is what docker on Linux uses for it's runtime. It means
that there is a separate containerd service running, and docker communicates over
GRPC to it.
To try this out, you will need to start with something like the following:
Window 1:
containerd --log-level debug
Window 2:
$env:DOCKER_WINDOWS_CONTAINERD=1
dockerd --experimental -D --containerd \\.\pipe\containerd-containerd
You will need the following binary from github.com/containerd/containerd in your path:
- containerd.exe
You will need the following binaries from github.com/Microsoft/hcsshim in your path:
- runhcs.exe
- containerd-shim-runhcs-v1.exe
For LCOW, it will require and initrd.img and kernel in `C:\Program Files\Linux Containers`.
This is no different to the current requirements. However, you may need updated binaries,
particularly initrd.img built from Microsoft/opengcs as (at the time of writing), Linuxkit
binaries are somewhat out of date.
Note that containerd and hcsshim for HCS v2 APIs do not yet support all the required
functionality needed for docker. This will come in time - this is a baby (although large)
step to migrating Docker on Windows to containerd.
Note that the HCS v2 APIs are only called on RS5+ builds. RS1..RS4 will still use
HCS v1 APIs as the v2 APIs were not fully developed enough on these builds to be usable.
This abstraction is done in HCSShim. (Referring specifically to runtime)
Note the LCOW graphdriver still uses HCS v1 APIs regardless.
Note also that this does not migrate docker to use containerd snapshotters
rather than graphdrivers. This needs to be done in conjunction with Linux also
doing the same switch.
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
This fix fixes the following issue with `go vet`:
```
$ go tool vet cmd/dockerd/daemon.go
cmd/dockerd/daemon.go:163: the cancel function is not used on all paths (possible context leak)
cmd/dockerd/daemon.go:167: this return statement may be reached without using the cancel var defined on line 163
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Please refer to `docs/rootless.md`.
TLDR:
* Make sure `/etc/subuid` and `/etc/subgid` contain the entry for you
* `dockerd-rootless.sh --experimental`
* `docker -H unix://$XDG_RUNTIME_DIR/docker.sock run ...`
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Some messages are logged before the logrus format was set,
therefore resulting in inconsistent log-message formatting
during startup;
Before this patch;
```
dockerd --experimental
WARN[0000] Running experimental build
INFO[2018-11-24T11:24:05.615249610Z] libcontainerd: started new containerd process pid=132
INFO[2018-11-24T11:24:05.615348322Z] parsed scheme: "unix" module=grpc
...
```
With this patch applied;
```
dockerd --experimental
WARN[2018-11-24T13:41:51.199057259Z] Running experimental build
INFO[2018-11-24T13:41:51.200412645Z] libcontainerd: started new containerd process pid=293
INFO[2018-11-24T13:41:51.200523051Z] parsed scheme: "unix" module=grpc
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change is needed for 32 bit targets as the default type is int32
and the handle constants do not fit into it.
Signed-off-by: Jiri Appl <jiria@microsoft.com>
This implements chown support on Windows. Built-in accounts as well
as accounts included in the SAM database of the container are supported.
NOTE: IDPair is now named Identity and IDMappings is now named
IdentityMapping.
The following are valid examples:
ADD --chown=Guest . <some directory>
COPY --chown=Administrator . <some directory>
COPY --chown=Guests . <some directory>
COPY --chown=ContainerUser . <some directory>
On Windows an owner is only granted the permission to read the security
descriptor and read/write the discretionary access control list. This
fix also grants read/write and execute permissions to the owner.
Signed-off-by: Salahuddin Khan <salah@docker.com>
Adds a supervisor package for starting and monitoring containerd.
Separates grpc connection allowing access from daemon.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
Disable cri plugin by default in containerd and
allows an option to enable the plugin. This only
has an effect on containerd when supervised by
dockerd. When containerd is managed outside of
dockerd, the configuration is not effected.
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
This introduces a PRODUCT environment variable that is used to set a constant
at dockerversion.ProductName.
That is then used to set BuildKit's ExportedProduct variable in order to show
useful error messages to users when a certain version of the product doesn't
support a BuildKit feature.
Signed-off-by: Tibor Vass <tibor@docker.com>
dockerd allows the `--log-level` to be specified, but this log-level
was not forwarded to the containerd process.
This patch sets containerd's log-level to the same as dockerd if a
custom level is provided.
Now that `--log-level` is also passed to containerd, the default "info"
is removed, so that containerd's default (or the level configured in containerd.toml)
is still used if no log-level is set.
Before this change:
containerd would always be started without a log-level set (only the level that's configured in `containerd.toml`);
```
root 1014 2.5 2.1 496484 43468 pts/0 Sl+ 12:23 0:00 dockerd
root 1023 1.2 1.1 681768 23832 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml
```
After this change:
when running `dockerd` without options (same as current);
```
root 1014 2.5 2.1 496484 43468 pts/0 Sl+ 12:23 0:00 dockerd
root 1023 1.2 1.1 681768 23832 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml
```
when running `dockerd --debug`:
```
root 600 0.8 2.1 512876 43180 pts/0 Sl+ 12:20 0:00 dockerd --debug
root 608 0.6 1.1 624428 23672 ? Ssl 12:20 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
```
when running `dockerd --log-level=panic`
```
root 747 0.6 2.1 496548 43996 pts/0 Sl+ 12:21 0:00 dockerd --log-level=panic
root 755 0.7 1.1 550696 24100 ? Ssl 12:21 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level panic
```
combining `--debug` and `--log-level` (`--debug` takes precedence):
```
root 880 2.7 2.1 634692 43336 pts/0 Sl+ 12:23 0:00 dockerd --debug --log-level=panic
root 888 1.0 1.1 616232 23652 ? Ssl 12:23 0:00 \_ docker-containerd --config /var/run/docker/containerd/containerd.toml --log-level debug
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
