The (*network).ipamRelease function nils out the network's IPAM info
fields, putting the network struct into an inconsistent state. The
network-restore startup code panics if it tries to restore a network
from a struct which has fewer IPAM config entries than IPAM info
entries. Therefore (*network).delete contains a critical section: by
persisting the network to the store after ipamRelease(), the datastore
will contain an inconsistent network until the deletion operation
completes and finishes deleting the network from the datastore. If for
any reason the deletion operation is interrupted between ipamRelease()
and deleteFromStore(), the daemon will crash on startup when it tries to
restore the network.
Updating the datastore after releasing the network's IPAM pools may have
served a purpose in the past, when a global datastore was used for
intra-cluster communication and the IPAM allocator had persistent global
state, but nowadays there is no global datastore and the IPAM allocator
has no persistent state whatsoever. Remove the vestigial datastore
update as it is no longer necessary and only serves to cause problems.
If the network deletion is interrupted before the network is deleted
from the datastore, the deletion will resume during the next daemon
startup, including releasing the IPAM pools.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Allow SetMatrix to be used as a value type with a ready-to-use zero
value. SetMatrix values are already non-copyable by virtue of having a
mutex field so there is no harm in allowing non-pointer values to be
used as local variables or struct fields. Any attempts to pass around
by-value copies, e.g. as function arguments, will be flagged by go vet.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Per the Interface Segregation Principle, network drivers should not have
to depend on GetPluginGetter methods they do not use. The remote network
driver is the only one which needs a PluginGetter, and it is already
special-cased in Controller so there is no sense warping the interfaces
to achieve a foolish consistency. Replace all other network drivers' Init
functions with Register functions which take a driverapi.Registerer
argument instead of a driverapi.DriverCallback. Add back in Init wrapper
functions for only the drivers which Swarmkit references so that
Swarmkit can continue to build.
Refactor the libnetwork Controller to use the new drvregistry.Networks
and drvregistry.IPAMs driver registries in place of the legacy ones.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *network implements sync.Locker because the mutex is
embedded. Change the mutex to an unexported field so *network no
longer spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Embedded structs are part of the exported surface of a struct type.
Boxing a struct value into an interface value does not erase that;
any code could gain access to the embedded struct value with a simple
type assertion. The mutex is supposed to be a private implementation
detail, but *controller implements sync.Locker because the mutex is
embedded.
c, _ := libnetwork.New()
c.(sync.Locker).Lock()
Change the mutex to an unexported field so *controller no longer
spuriously implements the sync.Locker interface.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/etchosts/etchosts_test.go:167:54: empty-lines: extra empty line at the end of a block (revive)
libnetwork/osl/route_linux.go:185:74: empty-lines: extra empty line at the start of a block (revive)
libnetwork/osl/sandbox_linux_test.go:323:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/bitseq/sequence.go:412:48: empty-lines: extra empty line at the start of a block (revive)
libnetwork/datastore/datastore_test.go:67:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/datastore/mock_store.go:34:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld.go:202:44: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/firewalld_test.go:76:36: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:256:67: empty-lines: extra empty line at the end of a block (revive)
libnetwork/iptables/iptables.go:303:128: empty-lines: extra empty line at the start of a block (revive)
libnetwork/networkdb/cluster.go:183:72: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipams/null/null_test.go:44:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/macvlan/macvlan_store.go:45:52: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1058:39: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/port_mapping.go:88:111: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/link.go:26:90: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ipv6_test.go:17:34: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/bridge/setup_ip_tables.go:392:4: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/bridge/bridge.go:804:50: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_serf.go:183:29: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/ov_utils.go:81:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/peerdb.go:172:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:209:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:344:89: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/peerdb.go:436:63: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/overlay.go:183:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/drivers/overlay/encryption.go:69:28: empty-lines: extra empty line at the end of a block (revive)
libnetwork/drivers/overlay/ov_network.go:563:81: empty-lines: extra empty line at the start of a block (revive)
libnetwork/default_gateway.go:32:43: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:184:64: empty-lines: extra empty line at the end of a block (revive)
libnetwork/endpoint.go:161:55: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store.go:320:33: empty-lines: extra empty line at the end of a block (revive)
libnetwork/store_linux_test.go:11:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox.go:571:36: empty-lines: extra empty line at the start of a block (revive)
libnetwork/service_common.go:317:246: empty-lines: extra empty line at the start of a block (revive)
libnetwork/endpoint.go:550:17: empty-lines: extra empty line at the end of a block (revive)
libnetwork/sandbox_dns_unix.go:213:106: empty-lines: extra empty line at the start of a block (revive)
libnetwork/controller.go:676:85: empty-lines: extra empty line at the end of a block (revive)
libnetwork/agent.go:876:60: empty-lines: extra empty line at the end of a block (revive)
libnetwork/resolver.go:324:69: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1153:92: empty-lines: extra empty line at the end of a block (revive)
libnetwork/network.go:1955:67: empty-lines: extra empty line at the start of a block (revive)
libnetwork/network.go:2235:9: empty-lines: extra empty line at the start of a block (revive)
libnetwork/libnetwork_internal_test.go:336:26: empty-lines: extra empty line at the start of a block (revive)
libnetwork/resolver_test.go:76:35: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:303:38: empty-lines: extra empty line at the end of a block (revive)
libnetwork/libnetwork_test.go:985:46: empty-lines: extra empty line at the end of a block (revive)
libnetwork/ipam/allocator_test.go:1263:37: empty-lines: extra empty line at the start of a block (revive)
libnetwork/errors_test.go:9:40: empty-lines: extra empty line at the end of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove the "deadcode", "structcheck", and "varcheck" linters, as they are
deprecated:
WARN [runner] The linter 'deadcode' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'structcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [runner] The linter 'varcheck' is deprecated (since v1.49.0) due to: The owner seems to have abandoned the linter. Replaced by unused.
WARN [linters context] structcheck is disabled because of generics. You can track the evolution of the generics support by following the https://github.com/golangci/golangci-lint/issues/2649.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The correct formatting for machine-readable comments is;
//<some alphanumeric identifier>:<options>[,<option>...][ // comment]
Which basically means:
- MUST NOT have a space before `<identifier>` (e.g. `nolint`)
- Identified MUST be alphanumeric
- MUST be followed by a colon
- MUST be followed by at least one `<option>`
- Optionally additional `<options>` (comma-separated)
- Optionally followed by a comment
Any other format will not be considered a machine-readable comment by `gofmt`,
and thus formatted as a regular comment. Note that this also means that a
`//nolint` (without anything after it) is considered invalid, same for `//#nosec`
(starts with a `#`).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Older versions of Go don't format comments, so committing this as
a separate commit, so that we can already make these changes before
we upgrade to Go 1.19.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the call to cleanupServiceBindings during network deletion
conditional on Windows (where it is required), thereby providing a
performance improvement to network cleanup on Linux.
Signed-off-by: Trapier Marshall <tmarshall@mirantis.com>
Removal of PolicyLists from Windows VFP must be performed prior to
removing the HNS network. Otherwise PolicyList removal fails with
HNS error "network not found".
Signed-off-by: Trapier Marshall <tmarshall@mirantis.com>
- fix incorrectly formatted GoDoc and comments
- rename a variable that collided with the `cap` built-in
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fix 'failed to get network during CreateEndpoint' during container starting.
Change the error type to `libnetwork.ErrNoSuchNetwork`, so `Start()` in `daemon/cluster/executor/container/controller.go` will recreate the network.
Signed-off-by: Xinfeng Liu <xinfeng.liu@gmail.com>
This PR carryforwards https://github.com/moby/libnetwork/pull/2239
and incorporates the suggestions in comments to fix the NPE and
potential NPEs due to a null value returned by ep.Iface()
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
Deleting a network sandbox on Linux implicitly clears OS (ipvs) load
balancer state. Deleting an HNS network on Windows by contrast does not
inherently remove its corresponding VFP load balancers. The method to
remove load balancers belongs to the network and so must be called prior
to or while deleting a network. This commit reverts one line from
ea2fa20859, reintroducing a call to
explicitly remove backend load balancers during network removal.
Signed-off-by: Trapier Marshall <tmarshall@mirantis.com>
In windows HNS manages IPAM. If the user does not specify a subnet, HNS will choose one
for them. However, in order for the IPAM to show up in the output of "docker inspect",
we need to update the network IPAMv4Config field.
Signed-off-by: Pradip Dhara <pradipd@microsoft.com>
RFC434 states that DNS Servers should be case insensitive
This commit makes sure that all DNS queries will be translated
to lower ASCII characters and all svcRecords will be saved in
lower case to abide by the RFC
Relates to https://github.com/moby/moby/issues/21169
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
It is possible that the node is not yet present in
the node list map. In this case just print a warning
and return. The next iteration would be fine
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
Allow DSR to be a configurable option through a generic option to the
overlay driver. On the one hand this approach makes sense insofar as
only overlay networks can currently perform load balancing. On the
other hand, this approach has several issues. First, should we create
another type of swarm scope network, this will prevent it working.
Second, the service core code is separate from the driver code and the
driver code can't influence the core data structures. So the driver
code can't set this option itself. Therefore, implementing in this way
requires some hack code to test for this option in
controller.NewNetwork.
A more correct approach would be to make this a generic option for any
network. Then the driver could ignore, reject or be unaware of the option
depending on the chosen model. This would require changes to:
* libnetwork - naturally
* the docker API - to carry the option
* swarmkit - to propagate the option
* the docker CLI - to support the option
* moby - to translate the API option into a libnetwork option
Given the urgency of requests to address this issue, this approach will
be saved for a future iteration.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Change the sandbox IDs for the sandboxes of load-balancing endpoints to
be "lb_XXXXXXXXX" where XXXXXXXXX is the network ID that this sandbox
load balances for. This makes it easier to find these sandboxes in
/var/run/docker/netns and thus makes debugging easier.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Internal directory is designed to contain libraries
that are exclusively used by this project
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
The previous code used string slices to limit the length of certain
fields like endpoint or sandbox IDs. This assumes that these strings
are at least as long as the slice length. Unfortunately, some sandbox
IDs can be smaller than 7 characters. This fix addresses this issue
by systematically converting format string calls that were taking
fixed-slice arguments to use a precision specifier in the string format
itself. From the golang fmt package documentation:
For strings, byte slices and byte arrays, however, precision limits
the length of the input to be formatted (not the size of the output),
truncating if necessary. Normally it is measured in runes, but for
these types when formatted with the %x or %X format it is measured
in bytes.
This nicely fits the desired behavior: it will limit the number of
runes considered for string interpolation to the precision value.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Refactor the ostweaks file to allows a more easy reuse
Add a method on the osl.Sandbox interface to allow setting
knobs on the sandbox
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This is the heart of the scalability change for services in libnetwork.
The present routing mesh adds load-balancing rules for a network to
every container connected to the network. This newer approach creates a
load-balancing endpoint per network per node. For every service on a
network, libnetwork assigns the VIP of the service to the endpoint's
interface as an alias. This endpoint must have a unique IP address in
order to route return traffic to it. Traffic destined for a service's
VIP arrives at the load-balancing endpoint on the VIP and from there,
Linux load balances it among backend destinations while SNATing said
traffic to the endpoint's unique IP address.
The net result of this scheme is that each node in a swarm need only
have one set of load balancing state per service instead of one per
container on the node. This scheme is very similar to how services
currently operate on Windows nodes in libnetwork. It (as with Windows
nodes) costs the use of extra IP addresses in a network (one per node)
and an extra network hop in the stack, although, always in the stack
local to the container.
In order to prevent existing deployments from suddenly failing if they
failed to allocate sufficient address space to include per-node
load-balancing endpoint IP addresses, this patch preserves the existing
functionality and activates the new functionality on a per-network
basis depending on whether the network has a load-balancing endpoint.
Eventually, moby should always set this option when creating new
networks and should only omit it for networks created as part of a swarm
that are not marked to use endpoint load balancing.
This patch also normalizes the code to treat "load" and "balancer"
as two separate words from the perspectives of variable/function naming.
This means that the 'b' in "balancer" must be capitalized.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Error unwinding only works if the error variable is used consistently
and isn't hidden in the scope of other if statements.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Change the Delete() method to take optional options and add
NetworkDeleteOptionRemoveLB as one such option. This option allows
explicit removal of an ingress network along with its load-balancing
endpoint if there are no other endpoints in the network. Prior to this,
the libnetwork client would have to manually search for and remove the
ingress load balancing endpoint from an ingress network. This was, of
course, completely hacky.
This commit will require a slight modification in moby to make use of
the option when deleting the ingress network.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
Fix related to bug: https://github.com/docker/for-linux/issues/348
We should perform updateToStore(ep) after n.addEndpoint or do update twice,
otherwise response from network plugin will not be written to KV storage.
This results in container creation with broken network config.
Signed-off-by: Siarhei Rasiukevich <raskintech@gmail.com>
We should not delete an ingress network just because its endpoint count
drops to 1 (the IP address of the sandbox). This addresses a regression
where the ingress sandbox could be deleted on workers when the last
container leave said sandbox.
Signed-off-by: Chris Telfer <ctelfer@docker.com>
VETH interface was not cleaned up when DockerD got killed between addEndpoint and updateToStore calls.
I have added logs and made sure calling updateToStore before addEndpoint contains same values.
Hence moving up the call looks safer and VETH gets cleaned up even after DockerD gets killed in the middle.
Signed-off-by: selansen <elango@docker.com>
Attachable containers they are tasks with no service associated
their cleanup was not done properly so it was possible to have
a leak of their name resolution if that was the last container
on the network.
Cleanupservicebindings was not able to do the cleanup because there
is no service, while also the notification of the delete arrives
after that the network is already being cleaned
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Correct SetMatrix documentation
The SetMatrix is a generic data structure, so the description
should not be tight to any specific use
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Service Discovery reuse name and serviceBindings deletion
- Added logic to handle name reuse from different services
- Moved the deletion from the serviceBindings map at the end
of the rmServiceBindings body to avoid race with new services
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Avoid race on network cleanup
Use the locker to avoid the race between the network
deletion and new endpoints being created
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* CleanupServiceBindings to clean the SD records
Allow the cleanupServicebindings to take care of the service discovery
cleanup. Also avoid to trigger the cleanup for each endpoint from an SD
point of view
LB and SD will be separated in the future
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* Addressed comments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
* NetworkDB deleteEntry has to happen
If there is an error locally guarantee that the delete entry
on network DB is still honored
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
changed the ipMap to SetMatrix to allow transient states
Compacted the addSvc and deleteSvc into a one single method
Updated the datastructure for backends to allow storing all the information needed
to cleanup properly during the cleanupServiceBindings
Removed the enable/disable Service logic that was racing with sbLeave/sbJoin logic
Add some debug logs to track further race conditions
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
