Move the default to the service itself, and produce the correct status code
if an invalid limit was specified. The default is currently set both on the
cli and on the daemon side, and it should be only set on one of them.
There is a slight change in behavior; previously, searching with `--limit=0`
would produce an error, but with this change, it's considered the equivalent
of "no limit set" (and using the default).
We could keep the old behavior by passing a pointer (`nil` means "not set"),
but I left that for a follow-up exercise (we may want to pass an actual
config instead of separate arguments, as well as some other things that need
cleaning up).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The intent of this function is to return a copy of the service's configuration,
and to copy / dereference the options in its configuration.
The code was doing this in slightly complicated fashion. This patch;
- adds a `copy()` function to serviceConfig
- rewrites the code to use a slightly more idiomatic approach, using one of
the approaches described in "golang SliceTricks" https://github.com/golang/go/wiki/SliceTricks#copy
- changes defaultService.ServiceConfig() to use this function, and updates
its godoc to better describe that it returns a copy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes the ugly hack where we stored the current config, tried to
reconfigure the service, and rolled back to the stored copy on failures.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Most operations only require read access, so change this to use an RWMutex,
and some minor refactoring in lookupV2Endpoints() so that we are not
constructing tlsconfig multiple times in some cases.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- registry: newIndexInfo(): minor refactor
- registry: loadAllowNondistributableArtifacts() minor refactor
initialise the slices with a length.
- registry: defaultService.Search(): minor refactor
Perform all manipulation earlier, so that it's not needed to scroll up
to learn what's done.
- various other minor cleanups
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This error was only returned in a single location, and not used anywhere
as a specific type.
The error returned by `validateNoScheme()` also appeared to only be used in
one case; in all other cases, the error itself was ignored, and replaced with
a custom error. Because of this, this patch also replace `validateNoScheme()`
with a `hasScheme()` function that returns a boolean, to better match how it's
used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Un-export:
- config.LoadAllowNondistributableArtifacts()
- config.LoadInsecureRegistries()
- config.LoadMirrors()
The config type is already un-exported; this also un-exports these functions
to be explicit they're internal only.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These are only used internally, and the v1Endpoint.Path() function was only
used to get the `_ping` URL, so let's inline that code instead.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The DefaultService was not really meant to be used outside of the package, so
un-export it, and change NewService()'s signature to return a Service interface.
To un-export this type, a test in daemon/images was updated to not use DefaultService,
but now using the registry.Service interface itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
While this was intended t be a stop-gap solution, it's been there for years and
users depend on this. It's also still complicated to secure _localhost_, so
by now, we'd probably have to be realistic, and consider this to be "permanent".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is more in line with other consts that are used for defaults, and makes it
slightly easier to consume than DefaultV2Registry, e.g. see:
https://github.com/oras-project/oras-go/blob/v1.1.0/pkg/auth/docker/resolver.go#L81-L84
Note that both the "index.docker.io" and "registry-1.docker.io" domains
are here for historic reasons and backward-compatibility. These domains
are still supported by Docker Hub (and will continue to be supported), but
there are new domains already in use, and plans to consolidate all legacy
domains to new "canonical" domains. Once those domains are decided on, we
should update these consts (but making sure to preserve compatibility with
existing installs, clients, and user configuration).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
From the field's description [1]:
DualStack previously enabled RFC 6555 Fast Fallback
support, also known as "Happy Eyeballs", in which IPv4 is
tried soon if IPv6 appears to be misconfigured and
hanging.
Deprecated: Fast Fallback is enabled by default. To
disable, set FallbackDelay to a negative value.
This field was deprecated in efc185029b,
which is included in Go 1.12beta1 and up.
[1]: 2ebe77a2fd/src/net/dial.go (L54-L61)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Standalone is a boolean, so false by default; also cleanup some debug logs
(probably more logs can be removed)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think it's a bit more readable to just use a literal value
for these; this also prevents having to use `_` to skip zero.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This header was used for fallbacks to v1 registries, but it's no longer
used, and marked optional / legacy in the OCI distribution-spec:
https://github.com/opencontainers/distribution-spec/blob/v1.0.0/spec.md#legacy-docker-support-http-headers
> Because of the origins this specification, the client MAY encounter
> Docker-specific headers, such as `Docker-Content-Digest`, or
> `Docker-Distribution-API-Version`. These headers are OPTIONAL and
> clients SHOULD NOT depend on them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as domain.com, registry.com, mytest.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
just some minor cleaning up; construct the endpoint-path once
instead of twice, and grouping all variable declarations at the
start.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in 0fc11699ab as
a regression test for saving credentials by the CLI.
However, the CLI code is no longer in this repository, so it was
no longer testing anything.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 2808762b27.
This exception was added for rootless mode, but superseded by the
follow-up commit f4fa98f583, which
uses a different path to look for the certs when running in rootless
mode
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Go 1.14 adds quotes around the invalid scheme in the error returned in
golang/go@64cfe9f
Go 1.13:
Get I%27m%20not%20an%20url: unsupported protocol scheme ""
Go 1.14:
Get "I%27m%20not%20an%20url": unsupported protocol scheme ""
This patch updates the test to detect both versions of the error
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
1.Change base.Dial to base.DailContext.
2.Remove proxyDialer that was previously used to configure a
net.Dialer to route proxy.Dialer which will route the connections
through the proxy using the connections through a SOCKS proxy.
SOCKS proxies are now supported by configuring only http.Transport.Proxy,
and no longer require changing http.Transport.Dial.
Signed-off-by: HuanHuan Ye <logindaveye@gmail.com>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
It has been declared deprecated by the author, and has a knack for
false-positives (as well as giving bad advice when it comes to APIs --
which is quite clear when looking at "nolint: interfacer" comments).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
This avoids the corner case where `via` is not nil, but has a length of 0,
so the updated code does not panic in that situation.
Signed-off-by: Iskander Sharipov <quasilyte@gmail.com>
This should eliminate a bunch of new (go-1.11 related) validation
errors telling that the code is not formatted with `gofmt -s`.
No functional change, just whitespace (i.e.
`git show --ignore-space-change` shows nothing).
Patch generated with:
> git ls-files | grep -v ^vendor/ | grep .go$ | xargs gofmt -s -w
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since Go 1.7, context is a standard package. Since Go 1.9, everything
that is provided by "x/net/context" is a couple of type aliases to
types in "context".
Many vendored packages still use x/net/context, so vendor entry remains
for now.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Instead of having to create a bunch of custom error types that are doing
nothing but wrapping another error in sub-packages, use a common helper
to create errors of the requested type.
e.g. instead of re-implementing this over and over:
```go
type notFoundError struct {
cause error
}
func(e notFoundError) Error() string {
return e.cause.Error()
}
func(e notFoundError) NotFound() {}
func(e notFoundError) Cause() error {
return e.cause
}
```
Packages can instead just do:
```
errdefs.NotFound(err)
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Deprecation of interacting with v1 registries was
started in docker 1.8.3, which added a `--disable-legacy-registry`
flag.
This option was anounced to be the default starting
with docker 17.06, and v1 registries completely
removed in docker 17.12.
This patch updates the default, and disables
interaction with v1 registres by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
This fix is based on:
https://github.com/docker/docker/issues/29936#issuecomment-277494885
Currently the insecure registry is only checked to see if it contains
scheme (`http(s)://`) or not. No fully validation is done and this
caused many confusions like in #29936.
This fix tries to address the issue.
This fix adds additional validation so that an insecure registry
is validated to make sure it is in `host:port` format where host
could be IPv4/IPv6 or a host name, and port could be an integer
between 0-65535.
Additional unit tests have been added.
This fix is related to #29936.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Remove forked reference package. Use normalized named values
everywhere and familiar functions to convert back to familiar
strings for UX and storage compatibility.
Enforce that the source repository in the distribution metadata
is always a normalized string, ignore invalid values which are not.
Update distribution tests to use normalized values.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
