Also fixes some potentially unclosed file-handles,
inlines some variables, and use consts for fixed
values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When mapping a port with the userland-proxy enabled, the daemon would
perform an "exec.LookPath" for every mapped port (which, in case of
a range of ports, would be for every port in the range).
This was both inefficient (looking up the binary for each port), inconsistent
(when running in rootless-mode, the binary was looked-up once), as well as
inconvenient, because a missing binary, or a mis-configureed userland-proxy-path
would not be detected daeemon startup, and not produce an error until starting
the container;
docker run -d -P nginx:alpine
4f7b6589a1680f883d98d03db12203973387f9061e7a963331776170e4414194
docker: Error response from daemon: driver failed programming external connectivity on endpoint romantic_wiles (7cfdc361821f75cbc665564cf49856cf216a5b09046d3c22d5b9988836ee088d): fork/exec docker-proxy: no such file or directory.
However, the container would still be created (but invalid);
docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
869f41d7e94f nginx:alpine "/docker-entrypoint.…" 10 seconds ago Created romantic_wiles
This patch changes how the userland-proxy is configured;
- The path of the userland-proxy is now looked up / configured at daemon
startup; this is similar to how the proxy is configured in rootless-mode.
- A warning is logged when failing to lookup the binary.
- If the daemon is configured with "userland-proxy" enabled, an error is
produced, and the daemon will refuse to start.
- The "proxyPath" argument for newProxyCommand() (in libnetwork/portmapper)
is now required to be set. It no longer looks up the executable, and
produces an error if no path was provided. While this change was not
required, it makes the daemon config the canonical source of truth, instead
of logic spread accross multiplee locations.
Some of this logic is a change of behavior, but these changes were made with
the assumption that we don't want to support;
- installing the userland proxy _after_ the daemon was started
- moving the userland proxy (or installing a proxy with a higher
preference in PATH)
With this patch:
Validating the config produces an error if the binary is not found:
dockerd --validate
WARN[2023-12-29T11:36:39.748699591Z] failed to lookup default userland-proxy binary error="exec: \"docker-proxy\": executable file not found in $PATH"
userland-proxy is enabled, but userland-proxy-path is not set
Disabling userland-proxy prints a warning, but validates as "OK":
dockerd --userland-proxy=false --validate
WARN[2023-12-29T11:38:30.752523879Z] ffailed to lookup default userland-proxy binary error="exec: \"docker-proxy\": executable file not found in $PATH"
configuration OK
Speficying a non-absolute path produces an error:
dockerd --userland-proxy-path=docker-proxy --validate
invalid userland-proxy-path: must be an absolute path: docker-proxy
Befor this patch, we would not validate this path, which would allow the daemon
to start, but fail to map a port;
docker run -d -P nginx:alpine
4f7b6589a1680f883d98d03db12203973387f9061e7a963331776170e4414194
docker: Error response from daemon: driver failed programming external connectivity on endpoint romantic_wiles (7cfdc361821f75cbc665564cf49856cf216a5b09046d3c22d5b9988836ee088d): fork/exec docker-proxy: no such file or directory.
Specifying an invalid userland-proxy-path produces an error as well:
dockerd --userland-proxy-path=/usr/local/bin/no-such-binary --validate
userland-proxy-path is invalid: stat /usr/local/bin/no-such-binary: no such file or directory
mkdir -p /usr/local/bin/not-a-file
dockerd --userland-proxy-path=/usr/local/bin/not-a-file --validate
userland-proxy-path is invalid: exec: "/usr/local/bin/not-a-file": is a directory
touch /usr/local/bin/not-an-executable
dockerd --userland-proxy-path=/usr/local/bin/not-an-executable --validate
userland-proxy-path is invalid: exec: "/usr/local/bin/not-an-executable": permission denied
Same when using the daemon.json config-file;
echo '{"userland-proxy-path":"no-such-binary"}' > /etc/docker/daemon.json
dockerd --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json: merged configuration validation from file and command line flags failed: invalid userland-proxy-path: must be an absolute path: no-such-binary
dockerd --userland-proxy-path=hello --validate
unable to configure the Docker daemon with file /etc/docker/daemon.json: the following directives are specified both as a flag and in the configuration file: userland-proxy-path: (from flag: hello, from file: /usr/local/bin/docker-proxy)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 59b83d8aae containerized these steps,
as they didn't work well on Debian Jessie:
> Because the `mount` here will sometimes fail when run in `debian:jessie`,
> which is what the environrment hosting the test suite is running if run
> from the `Makefile`.
> Also, why the heck not containerize it, all the things.
Follow-up commits, such as 228d74842f, and
1c5806cf57 updated the Debian distro, but
also updated this comment, losing the original context (the issue was
(originally) related to Debian Jessie).
This patch changes the test back to not use containers, which seems to
work fine (at least "it worked on my machine").
make TEST_IGNORE_CGROUP_CHECK=1 TEST_FILTER=TestDaemonNoSpaceLeftOnDeviceError DOCKER_GRAPHDRIVER=overlay2 test-integration
=== RUN TestDockerDaemonSuite/TestDaemonNoSpaceLeftOnDeviceError
check_test.go:589: [df36ad96a412b] daemon is not started
--- PASS: TestDockerDaemonSuite (5.12s)
--- PASS: TestDockerDaemonSuite/TestDaemonNoSpaceLeftOnDeviceError (5.12s)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Debian Woodworm ships with a newer version of iptables, which caused two
tests to fail:
=== FAIL: amd64.integration-cli TestDockerDaemonSuite/TestDaemonICCLinkExpose (1.18s)
docker_cli_daemon_test.go:841: assertion failed: false (matched bool) != true (true bool): iptables output should have contained "DROP.*all.*ext-bridge6.*ext-bridge6", but was "Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)\n pkts bytes target prot opt in out source destination \n 0 0 DOCKER-USER 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 DOCKER-ISOLATION-STAGE-1 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- * ext-bridge6 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED\n 0 0 DOCKER 0 -- * ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- ext-bridge6 !ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n 0 0 DROP 0 -- ext-bridge6 ext-bridge6 0.0.0.0/0 0.0.0.0/0 \n"
--- FAIL: TestDockerDaemonSuite/TestDaemonICCLinkExpose (1.18s)
=== FAIL: amd64.integration-cli TestDockerDaemonSuite/TestDaemonICCPing (1.19s)
docker_cli_daemon_test.go:803: assertion failed: false (matched bool) != true (true bool): iptables output should have contained "DROP.*all.*ext-bridge5.*ext-bridge5", but was "Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)\n pkts bytes target prot opt in out source destination \n 0 0 DOCKER-USER 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 DOCKER-ISOLATION-STAGE-1 0 -- * * 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- * ext-bridge5 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED\n 0 0 DOCKER 0 -- * ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n 0 0 ACCEPT 0 -- ext-bridge5 !ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n 0 0 DROP 0 -- ext-bridge5 ext-bridge5 0.0.0.0/0 0.0.0.0/0 \n"
--- FAIL: TestDockerDaemonSuite/TestDaemonICCPing (1.19s)
Both the `TestDaemonICCPing`, and `TestDaemonICCLinkExpose` test were introduced
in dd0666e64f. These tests called `iptables` with
the `-n` (`--numeric`) option, which prevents it from doing a reverse-DNS lookup
as an optimization.
However, the `-n` option did not have an effect to the `prot` column before
commit [da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa] (iptables < v1.8.9 or v1.8.8).
Newer versions, such as the iptables version shipping with Debian Woodworm do,
so we need to update the expected output for this version.
This patch removes the `-n` option, to keep the test more portable, also when
run non-containerized, and removes the use of regular expressions to check the
result, as these regular expressions were quite permissive (using `.*` wild-
card matching). Instead, we're getting the
With this change;
make DOCKER_GRAPHDRIVER=vfs TEST_FILTER=TestDaemonICC TEST_IGNORE_CGROUP_CHECK=1 test-integration
...
--- PASS: TestDockerDaemonSuite (139.11s)
--- PASS: TestDockerDaemonSuite/TestDaemonICCLinkExpose (54.62s)
--- PASS: TestDockerDaemonSuite/TestDaemonICCPing (84.48s)
[da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa]: https://git.netfilter.org/iptables/commit/?id=da8ecc62dd765b15df84c3aa6b83dcb7a81d4ffa
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These are not yet implemented with containerd snapshotters. We skip them
now because implementing this is not trivial with containerd.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
- Pass empty containerd socket which forces the daemon to create a new
supervised containerd. Otherwise a global containerd daemon will be
used and the pulled image data will be stored in its data directory,
instead of the the newly specified `data-root` that has a limited
storage capacity.
- Don't try to use `vfs` snapshotter, instead use `native` which is
containerd's equivalent for `vfs`.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Integration tests will now configure clients to propagate traces as well
as create spans for all tests.
Some extra changes were needed (or desired for trace propagation) in the
test helpers to pass through tracing spans via context.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The daemon has made a habit of mutating the DefaultRuntime and Runtimes
values in the Config struct to merge defaults. This would be fine if it
was a part of the regular configuration loading and merging process,
as is done with other config options. The trouble is it does so in
surprising places, such as in functions with 'verify' or 'validate' in
their name. It has been necessary in order to validate that the user has
not defined a custom runtime named "runc" which would shadow the
built-in runtime of the same name. Other daemon code depends on the
runtime named "runc" always being defined in the config, but merging it
with the user config at the same time as the other defaults are merged
would trip the validation. The root of the issue is that the daemon has
used the same config values for both validating the daemon runtime
configuration as supplied by the user and for keeping track of which
runtimes have been set up by the daemon. Now that a completely separate
value is used for the latter purpose, surprising contortions are no
longer required to make the validation work as intended.
Consolidate the validation of the runtimes config and merging of the
built-in runtimes into the daemon.setupRuntimes() function. Set the
result of merging the built-in runtimes config and default default
runtime on the returned runtimes struct, without back-propagating it
onto the config.Config argument.
Signed-off-by: Cory Snider <csnider@mirantis.com>
The migration code is in the 22.06 branch, and if we don't migrate
the only side-effect is the daemon's ID being regenerated (as a
UUID).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
integration-cli/docker_cli_pull_test.go:55:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_exec_test.go:46:64: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_service_health_test.go:86:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_images_test.go:128:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_node_test.go:79:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_health_test.go:51:57: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_health_test.go:159:73: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_swarm_unix_test.go:60:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_inspect_test.go:30:33: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_build_test.go:429:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_attach_unix_test.go:19:78: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_build_test.go:470:70: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_history_test.go:29:64: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_links_test.go:93:86: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:33:61: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_links_test.go:145:78: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:114:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_attach_test.go:226:153: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_by_digest_test.go:239:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_create_test.go:135:49: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:143:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:181:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_inspect_test.go:72:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:98:77: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:144:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_rmi_test.go:63:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:199:79: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_rmi_test.go:69:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:300:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_prune_unix_test.go:35:25: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_events_unix_test.go:393:60: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_events_unix_test.go:441:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_ps_test.go:33:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_ps_test.go:559:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_events_test.go:117:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:547:74: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_api_containers_test.go:1054:84: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:1076:87: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:1232:72: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_api_containers_test.go:1801:21: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_network_unix_test.go:58:95: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_network_unix_test.go:750:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_network_unix_test.go:765:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_swarm_test.go:617:100: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_swarm_test.go:892:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_daemon_test.go:119:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_daemon_test.go:981:68: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_daemon_test.go:1951:87: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_run_test.go:83:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_run_test.go:357:72: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_build_test.go:89:83: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:114:83: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:183:80: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:290:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:314:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:331:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:366:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:403:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:648:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:708:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:938:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1018:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1097:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1182:62: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1244:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1524:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1546:80: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1716:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1730:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2162:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2270:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2288:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3206:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3392:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3433:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3678:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3732:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3759:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3802:61: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3898:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4107:9: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4791:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4821:73: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4854:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:5341:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:5593:81: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:2145:11: empty-lines: extra empty line at the start of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
integration-cli/docker_cli_daemon_test.go:545:54: host:port in url should be constructed with net.JoinHostPort and not directly with fmt.Sprintf (nosprintfhostport)
cmdArgs = append(cmdArgs, "--tls=false", "--host", fmt.Sprintf("tcp://%s:%s", l.daemon, l.port))
^
opts/hosts_test.go:35:31: host:port in url should be constructed with net.JoinHostPort and not directly with fmt.Sprintf (nosprintfhostport)
"tcp://:5555": fmt.Sprintf("tcp://%s:5555", DefaultHTTPHost),
^
opts/hosts_test.go:91:30: host:port in url should be constructed with net.JoinHostPort and not directly with fmt.Sprintf (nosprintfhostport)
":5555": fmt.Sprintf("tcp://%s:5555", DefaultHTTPHost),
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Contrary to popular belief, the OCI Runtime specification does not
specify the command-line API for runtimes. Looking at containerd's
architecture from the lens of the OCI Runtime spec, the _shim_ is the
OCI Runtime and runC is "just" an implementation detail of the
io.containerd.runc.v2 runtime. When one configures a non-default runtime
in Docker, what they're really doing is instructing Docker to create
containers using the io.containerd.runc.v2 runtime with a configuration
option telling the runtime that the runC binary is at some non-default
path. Consequently, only OCI runtimes which are compatible with the
io.containerd.runc.v2 shim, such as crun, can be used in this manner.
Other OCI runtimes, including kata-containers v2, come with their own
containerd shim and are not compatible with io.containerd.runc.v2.
As Docker has not historically provided a way to select a non-default
runtime which requires its own shim, runtimes such as kata-containers v2
could not be used with Docker.
Allow other containerd shims to be used with Docker; no daemon
configuration required. If the daemon is instructed to create a
container with a runtime name which does not match any of the configured
or stock runtimes, it passes the name along to containerd verbatim. A
user can start a container with the kata-containers runtime, for
example, simply by calling
docker run --runtime io.containerd.kata.v2
Runtime names which containerd would interpret as a path to an arbitrary
binary are disallowed. While handy for development and testing it is not
strictly necessary and would allow anyone with Engine API access to
trivially execute any binary on the host as root, so we have decided it
would be safest for our users if it was not allowed.
It is not yet possible to set an alternative containerd shim as the
default runtime; it can only be configured per-container.
Signed-off-by: Cory Snider <csnider@mirantis.com>
libnetwork/firewall_linux.go:11:21: var-declaration: should drop = nil from declaration of var ctrl; it is the zero value (revive)
ctrl *controller = nil
^
distribution/pull_v2_test.go:213:4: S1038: should use t.Fatalf(...) instead of t.Fatal(fmt.Sprintf(...)) (gosimple)
t.Fatal(fmt.Sprintf("expected formatPlatform to show windows platform with a version, but got '%s'", result))
^
integration-cli/docker_cli_build_test.go:5951:3: S1038: should use c.Skipf(...) instead of c.Skip(fmt.Sprintf(...)) (gosimple)
c.Skip(fmt.Sprintf("Bug fixed in 18.06 or higher.Skipping it for %s", testEnv.DaemonInfo.ServerVersion))
^
integration-cli/docker_cli_daemon_test.go:240:3: S1038: should use c.Skipf(...) instead of c.Skip(fmt.Sprintf(...)) (gosimple)
c.Skip(fmt.Sprintf("New base device size (%v) must be greater than (%s)", units.HumanSize(float64(newBasesizeBytes)), units.HumanSize(float64(oldBasesizeBytes))))
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The libtrust trust-key is only used for pushing legacy image manifests;
pushing these images has been deprecated, and we only need to be able
to push them in our CI.
This patch disables generating the trust-key (and related paths) unless
the DOCKER_ALLOW_SCHEMA1_PUSH_DONOTUSE env-var is set (which we do in
our CI).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit replaces `os.Setenv` with `t.Setenv` in tests. The
environment variable is automatically restored to its original value
when the test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.Setenv
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
pkg/urlutil (despite its poorly chosen name) is not really intended as a generic
utility to handle URLs, and should only be used by the builder to handle (remote)
build contexts.
This patch:
- removes a redundant use of urlutil.IsTransportURL(); instead adding some code
to check if the given scheme (protocol) is supported.
- define a `defaultPort` const for the default port.
- use `net.JoinHostPort()` instead of string concatenating, to account for possible
issues with IPv6 addresses.
- renames a variable that collided with an imported package.
- improves test coverage, and moves an integration test.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use unique names to prevent tests from interfering, using a shorter
name, as there's a maximum length for these.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A number of tests in the TestDockerDaemonSuite create a custom bridge as part
of the test. In some cases, an existing `docker0` bridge could interfere with
those tests. For example, the `TestDaemonICCLinkExpose` and `TestDaemonICCPing`
verify that no "icc" communication is possible, and for this create a new
bridge with a custom IP-range.
However, depending on which tests ran before the test, a default `docker0` bridge
may exist (e.g., if the`TestDefaultGatewayIPv4Implicit`) with the same IP-range,
in which iptables rules may have been set up that allow communication, and thus
make the "icc" tests fail.
This patch removes the `docker0` interface at the start of tests that create
their own bridge to prevent it from interfering.
Note that alternatively, we could update those tests to use an IP-range that's
less likely to overlap, but this may be more brittle (but could still be done
in addition to this change as a follow-up).
To verify these changes;
make DOCKER_GRAPHDRIVER=vfs TEST_SKIP_INTEGRATION=1 TESTFLAGS='-test.run TestDockerDaemonSuite/TestDaemon(DefaultGatewayIPv4|ICC)' test-integration-cli
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Update the frozen images to also be based on Debian bullseye. Using the "slim"
variant (which looks to have all we're currently using), and remove the
buildpack-dep frozen image.
The buildpack-dep image is quite large, and it looks like we only use it to
compile some C binaries, which should work fine on a regular debian image;
docker build -t debian:bullseye-slim-gcc -<<EOF
FROM debian:bullseye-slim
RUN apt-get update && apt-get install -y gcc libc6-dev --no-install-recommends
EOF
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
debian bullseye-slim-gcc 1851750242af About a minute ago 255MB
buildpack-deps bullseye fe8fece98de2 2 days ago 834MB
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
Switch to moby/sys/mount and mountinfo. Keep the pkg/mount for potential
outside users.
This commit was generated by the following bash script:
```
set -e -u -o pipefail
for file in $(git grep -l 'docker/docker/pkg/mount"' | grep -v ^pkg/mount); do
sed -i -e 's#/docker/docker/pkg/mount"#/moby/sys/mount"#' \
-e 's#mount\.\(GetMounts\|Mounted\|Info\|[A-Za-z]*Filter\)#mountinfo.\1#g' \
$file
goimports -w $file
done
```
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Fixes linter warnings like this one:
> distribution/pull_v2.go:229:39: SA1019: os.SEEK_SET is deprecated: Use io.SeekStart, io.SeekCurrent, and io.SeekEnd. (staticcheck)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
