This endpoint was deprecated in API v1.20 (Docker Engine v1.8.0) in
commit db9cc91a9e, in favor of the
`PUT /containers/{id}/archive` and `HEAD /containers/{id}/archive`
endpoints, and disabled in API v1.24 (Docker Engine v1.12.0) through
commit 428328908d.
This patch removes the endpoint, and the associated `daemon.ContainerCopy`
method in the backend.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API versions before 1.19 allowed CpuShares that were greater than the maximum
or less than the minimum supported by the kernel, and relied on the kernel to
do the right thing.
Commit ed39fbeb2a introduced code to adjust the
CPU shares to be within the accepted range when using API version 1.18 or
lower.
API v1.23 and older are deprecated, so we can remove support for this
functionality.
Currently, there's no validation for CPU shares to be within an acceptable
range; a TODO was added to add validation for this option, and to use the
`linuxMinCPUShares` and `linuxMaxCPUShares` consts for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in 75f6929b44, but pinned
to the API version that was current at the time (v1.20), which is now
deprecated.
Update the test to use the current API version.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This removes various skips that accounted for running the integration tests
against older versions of the daemon before 20.10 (API version v1.41). Those
versions are EOL, and we don't run tests against them.
This reverts most of e440831802, and similar
PRs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The API endpoint `/containers/create` accepts several EndpointsConfig
since v1.22 but the daemon would error out in such case. This check is
moved from the daemon to the api and is now applied only for API < 1.44,
effectively allowing the daemon to create containers connected to
several networks.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Integration tests will now configure clients to propagate traces as well
as create spans for all tests.
Some extra changes were needed (or desired for trace propagation) in the
test helpers to pass through tracing spans via context.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Make the error message slightly clearer on "what" part is not valid,
and provide suggestions on what are acceptable values.
Before this change:
docker create --restart=always:3 busybox
Error response from daemon: invalid restart policy: maximum retry count cannot be used with restart policy 'always'
docker create --restart=always:-1 busybox
Error response from daemon: invalid restart policy: maximum retry count cannot be used with restart policy 'always'
docker create --restart=unknown busybox
Error response from daemon: invalid restart policy 'unknown'
After this change:
docker create --restart=always:3 busybox
Error response from daemon: invalid restart policy: maximum retry count can only be used with 'on-failure'
docker create --restart=always:-1 busybox
Error response from daemon: invalid restart policy: maximum retry count can only be used with 'on-failure' and cannot be negative
docker create --restart=unknown busybox
Error response from daemon: invalid restart policy: unknown policy 'unknown'; use one of 'no', 'always', 'on-failure', or 'unless-stopped'
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Also remove integration-cli: `DockerAPISuite.TestContainerAPIDeleteConflict`,
which was testing the same conditions as `TestRemoveContainerRunning` in
integration/container.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This field was added in f0e5b3d7d8 to
account for older versions of the engine (Docker EE LTS versions), which
did not yet provide the OSType field in Docker info, and had to be manually
set using the TEST_OSTYPE env-var.
This patch removes the field in favor of the equivalent in DaemonInfo. It's
more verbose, but also less ambiguous what information we're using (i.e.,
the platform the daemon is running on, not the local platform).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use is.ErrorType
- replace uses of client.IsErrNotFound for errdefs.IsNotFound, as
the client no longer returns the old error-type.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- use apiClient for api-clients to reduce shadowing (also more "accurate")
- use "ctr" instead of "container"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
integration-cli/docker_cli_pull_test.go:55:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_exec_test.go:46:64: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_service_health_test.go:86:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_images_test.go:128:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_node_test.go:79:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_health_test.go:51:57: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_health_test.go:159:73: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_swarm_unix_test.go:60:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_inspect_test.go:30:33: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_build_test.go:429:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_attach_unix_test.go:19:78: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_build_test.go:470:70: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_history_test.go:29:64: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_links_test.go:93:86: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:33:61: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_links_test.go:145:78: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:114:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_attach_test.go:226:153: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_by_digest_test.go:239:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_create_test.go:135:49: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:143:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_create_test.go:181:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_inspect_test.go:72:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:98:77: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:144:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_rmi_test.go:63:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:199:79: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_rmi_test.go:69:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_swarm_service_test.go:300:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_prune_unix_test.go:35:25: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_events_unix_test.go:393:60: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_events_unix_test.go:441:71: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_ps_test.go:33:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_ps_test.go:559:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_events_test.go:117:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:547:74: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_api_containers_test.go:1054:84: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:1076:87: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:1232:72: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_api_containers_test.go:1801:21: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_network_unix_test.go:58:95: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_network_unix_test.go:750:75: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_network_unix_test.go:765:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_swarm_test.go:617:100: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_swarm_test.go:892:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_daemon_test.go:119:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_daemon_test.go:981:68: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_daemon_test.go:1951:87: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_run_test.go:83:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_run_test.go:357:72: empty-lines: extra empty line at the start of a block (revive)
integration-cli/docker_cli_build_test.go:89:83: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:114:83: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:183:80: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:290:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:314:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:331:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:366:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:403:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:648:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:708:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:938:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1018:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1097:2: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1182:62: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1244:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1524:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1546:80: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1716:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:1730:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2162:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2270:71: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:2288:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3206:65: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3392:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3433:72: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3678:76: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3732:67: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3759:69: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3802:61: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:3898:66: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4107:9: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4791:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4821:73: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:4854:70: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:5341:74: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_cli_build_test.go:5593:81: empty-lines: extra empty line at the end of a block (revive)
integration-cli/docker_api_containers_test.go:2145:11: empty-lines: extra empty line at the start of a block (revive)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The wrapResponseError() utility converted some specific errors, but in
doing so, could hide the actual error message returned by the daemon.
In addition, starting with 38e6d474af,
HTTP status codes were already mapped to their corresponding errdefs
types on the client-side, making this conversion redundant.
This patch removes the wrapResponseError() utility; it's worth noting
that some error-messages will change slightly (as they now return the
error as returned by the daemon), but may cointain more details as
before, and in some cases prevents hiding the actual error.
Before this change:
docker container rm nosuchcontainer
Error: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error: No such container:path: mycontainer:/no/such/path
docker container cp ./Dockerfile mycontainer:/no/such/path
Error: No such container:path: mycontainer:/no/such
docker image rm nosuchimage
Error: No such image: nosuchimage
docker network rm nosuchnetwork
Error: No such network: nosuchnetwork
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
docker plugin rm nosuchplugin
Error: No such plugin: nosuchplugin
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error: No such service: nosuchservice
docker node rm nosuchnode
Error: No such node: nosuchnode
docker config rm nosuschconfig
Error: No such config: nosuschconfig
docker secret rm nosuchsecret
Error: No such secret: nosuchsecret
After this change:
docker container rm nosuchcontainer
Error response from daemon: No such container: nosuchcontainer
docker container cp mycontainer:/no/such/path .
Error response from daemon: Could not find the file /no/such/path in container mycontainer
docker container cp ./Dockerfile mycontainer:/no/such/path
Error response from daemon: Could not find the file /no/such in container mycontainer
docker image rm nosuchimage
Error response from daemon: No such image: nosuchimage:latest
docker network rm nosuchnetwork
Error response from daemon: network nosuchnetwork not found
docker volume rm nosuchvolume
Error response from daemon: get nosuchvolume: no such volume
docker plugin rm nosuchplugin
Error response from daemon: plugin "nosuchplugin" not found
docker checkpoint rm nosuchcontainer nosuchcheckpoint
Error response from daemon: No such container: nosuchcontainer
docker checkpoint rm mycontainer nosuchcheckpoint
Error response from daemon: checkpoint nosuchcheckpoint does not exist for container mycontainer
docker service rm nosuchservice
Error response from daemon: service nosuchservice not found
docker node rm nosuchnode
Error response from daemon: node nosuchnode not found
docker config rm nosuchconfig
Error response from daemon: config nosuchconfig not found
docker secret rm nosuchsecret
Error response from daemon: secret nosuchsecret not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I had to check what the actual size was, so added it to the const's documentation.
While at it, also made use of it in a test, so that we're testing against the expected
value, and changed one alias to be consistent with other places where we alias this
import.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Rather than bifurcate the test completely, this lets us keep the test
intact with a small function wrapper to allow the compiler to build the
code that'll never be called on Windows, on Windows.
Signed-off-by: Paul "TBBle" Hampson <Paul.Hampson@Pobox.com>
For some time, we defined a minimum limit for `--memory` limits to account for
overhead during startup, and to supply a reasonable functional container.
Changes in the runtime (runc) introduced a higher memory footprint during container
startup, which now lead to obscure error-messages that are unfriendly for users:
run --rm --memory=4m alpine echo success
docker: Error response from daemon: OCI runtime create failed: container_linux.go:349: starting container process caused "process_linux.go:449: container init caused \"process_linux.go:415: setting cgroup config for procHooks process caused \\\"failed to write \\\\\\\"4194304\\\\\\\" to \\\\\\\"/sys/fs/cgroup/memory/docker/1254c8d63f85442e599b17dff895f4543c897755ee3bd9b56d5d3d17724b38d7/memory.limit_in_bytes\\\\\\\": write /sys/fs/cgroup/memory/docker/1254c8d63f85442e599b17dff895f4543c897755ee3bd9b56d5d3d17724b38d7/memory.limit_in_bytes: device or resource busy\\\"\"": unknown.
ERRO[0000] error waiting for container: context canceled
Containers that fail to start because of this limit, will not be marked as OOMKilled,
which makes it harder for users to find the cause of the failure.
Note that _after_ this memory is only required during startup of the container. After
the container was started, the container may not consume this memory, and limits
could (manually) be lowered, for example, an alpine container running only a shell
can run with 512k of memory;
echo 524288 > /sys/fs/cgroup/memory/docker/acdd326419f0898be63b0463cfc81cd17fb34d2dae6f8aa3768ee6a075ca5c86/memory.limit_in_bytes
However, restarting the container will reset that manual limit to the container's
configuration. While `docker container update` would allow for the updated limit to
be persisted, (re)starting the container after updating produces the same error message
again, so we cannot use different limits for `docker run` / `docker create` and `docker update`.
This patch raises the minimum memory limnit to 6M, so that a better error-message is
produced if a user tries to create a container with a memory-limit that is too low:
docker create --memory=4m alpine echo success
docker: Error response from daemon: Minimum memory limit allowed is 6MB.
Possibly, this constraint could be handled by runc, so that different runtimes
could set a best-matching limit (other runtimes may require less overhead).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In order to run tests at mips64el device.
Now official-images has supported the following images for mips64el.
buildpack-deps:stretch
buildpack-deps:buster
debian:stretch
debian:buster
But official-images does not support the following images for mips64el.
debian:jessie
buildpack-deps:jessie
Signed-off-by: wanghuaiqing <wanghuaiqing@loongson.cn>
This enables image lookup when creating a container to fail when the
reference exists but it is for the wrong platform. This prevents trying
to run an image for the wrong platform, as can be the case with, for
example binfmt_misc+qemu.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Switch to moby/sys/mount and mountinfo. Keep the pkg/mount for potential
outside users.
This commit was generated by the following bash script:
```
set -e -u -o pipefail
for file in $(git grep -l 'docker/docker/pkg/mount"' | grep -v ^pkg/mount); do
sed -i -e 's#/docker/docker/pkg/mount"#/moby/sys/mount"#' \
-e 's#mount\.\(GetMounts\|Mounted\|Info\|[A-Za-z]*Filter\)#mountinfo.\1#g' \
$file
goimports -w $file
done
```
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
```
internal/test/environment/environment.go:37:23: `useing` is a misspelling of `using`(misspell)
integration/container/wait_test.go:49:9: `waitres` is a misspelling of `waiters`(misspell)
integration/container/wait_test.go:95:9: `waitres` is a misspelling of `waiters`(misspell)
integration-cli/docker_api_containers_test.go:1042:7: `waitres` is a misspelling of `waiters`(misspell)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
integration-cli/docker_cli_registry_user_agent_test.go:78:2: SA5001: should check returned error before deferring reg.Close() (staticcheck)
integration-cli/docker_cli_v2_only_test.go:30:2: SA5001: should check returned error before deferring reg.Close() (staticcheck)
integration-cli/docker_api_containers_test.go:392:3: SA5001: should check returned error before deferring resp.Body.Close() (staticcheck)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Replaced using a bit of grep-ing;
```
find . -name "*_test.go" -exec sed -E -i 's#assert.Assert\((.*), fmt.Sprintf\((.*)\)\)$#assert.Assert\(\1, \2\)#g' '{}' \;
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
