Don't change the behavior for older clients and keep the same behavior.
Otherwise client can't opt-out (because `ReadOnlyNonRecursive` is
unsupported before 1.44).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The github.com/containerd/containerd/log package was moved to a separate
module, which will also be used by upcoming (patch) releases of containerd.
This patch moves our own uses of the package to use the new module.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When live-restoring a container the volume driver needs be notified that
there is an active mount for the volume.
Before this change the count is zero until the container stops and the
uint64 overflows pretty much making it so the volume can never be
removed until another daemon restart.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
It was only used in a single location, and the ErrVolumeReadonly was not checked
for, or used as a sentinel error.
This error was introduced in c32dde5baa. It was
never used as a sentinel error, but from that commit, it looks like it was added
as a package variable to mirror already existing errors defined at the package
level.
This patch removes the exported variable, and replaces the error with an
errdefs.InvalidParameter(), so that the API also returns the correct (400)
status code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This changes mounts.NewParser() to create a parser for the current operatingsystem,
instead of one specific to a (possibly non-matching, in case of LCOW) OS.
With the OS-specific handling being removed, the "OS" parameter is also removed
from `daemon.verifyContainerSettings()`, and various other container-related
functions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If the container specified in `--volumes-from` did not exist, the
API returned a 404 status, which was interpreted by the CLI as the
specified _image_ to be missing (even if that was not the case).
This patch changes these error to return a 400 (bad request);
Before this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Unable to find image 'busybox:latest' locally
# latest: Pulling from library/busybox
# Digest: sha256:95cf004f559831017cdf4628aaf1bb30133677be8702a8c5f2994629f637a209
# Status: Image is up to date for busybox:latest
# Error response from daemon: No such container: nosuchcontainer
After this change:
# make sure the image is present
docker pull busybox
docker create --volumes-from=nosuchcontainer busybox
# Error response from daemon: No such container: nosuchcontainer
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In case a volume is specified via Mounts API, and SELinux is enabled,
the following error happens on container start:
> $ docker volume create testvol
> $ docker run --rm --mount source=testvol,target=/tmp busybox true
> docker: Error response from daemon: error setting label on mount
> source '': no such file or directory.
The functionality to relabel the source of a local mount specified via
Mounts API was introduced in commit 5bbf5cc and later broken by commit
e4b6adc, which removed setting mp.Source field.
With the current data structures, the host dir is already available in
v.Mountpoint, so let's just use it.
Fixes: e4b6adc
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
When using the mounts API, bind mounts are not supposed to be
automatically created.
Before this patch there is a race condition between valiating that a
bind path exists and then actually setting up the bind mount where the
bind path may exist during validation but was removed during mountpooint
setup.
This adds a field to the mountpoint struct to ensure that binds created
over the mounts API are not accidentally created.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This moves the platform specific stuff in a separate package and keeps
the `volume` package and the defined interfaces light to import.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Since the volume store already provides this functionality, we should
just use it rather than duplicating it.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
By default, if a user requests a bind mount it uses private propagation.
When the source path is a path within the daemon root this, along with
some other propagation values that the user can use, causes issues when
the daemon tries to remove a mountpoint because a container will then
have a private reference to that mount which prevents removal.
Unmouting with MNT_DETATCH can help this scenario on newer kernels, but
ultimately this is just covering up the problem and doesn't actually
free up the underlying resources until all references are destroyed.
This change does essentially 2 things:
1. Change the default propagation when unspecified to `rslave` when the
source path is within the daemon root path or a parent of the daemon
root (because everything is using rbinds).
2. Creates a validation error on create when the user tries to specify
an unacceptable propagation mode for these paths...
basically the only two acceptable modes are `rslave` and `rshared`.
In cases where we have used the new default propagation but the
underlying filesystem is not setup to handle it (fs must hvae at least
rshared propagation) instead of erroring out like we normally would,
this falls back to the old default mode of `private`, which preserves
backwards compatibility.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Instead of having to create a bunch of custom error types that are doing
nothing but wrapping another error in sub-packages, use a common helper
to create errors of the requested type.
e.g. instead of re-implementing this over and over:
```go
type notFoundError struct {
cause error
}
func(e notFoundError) Error() string {
return e.cause.Error()
}
func(e notFoundError) NotFound() {}
func(e notFoundError) Cause() error {
return e.cause
}
```
Packages can instead just do:
```
errdefs.NotFound(err)
```
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This PR has the API changes described in https://github.com/moby/moby/issues/34617.
Specifically, it adds an HTTP header "X-Requested-Platform" which is a JSON-encoded
OCI Image-spec `Platform` structure.
In addition, it renames (almost all) uses of a string variable platform (and associated)
methods/functions to os. This makes it much clearer to disambiguate with the swarm
"platform" which is really os/arch. This is a stepping stone to getting the daemon towards
fully multi-platform/arch-aware, and makes it clear when "operating system" is being
referred to rather than "platform" which is misleadingly used - sometimes in the swarm
meaning, but more often as just the operating system.
When using a volume via the `Binds` API, a shared selinux label is
automatically set.
The `Mounts` API is not setting this, which makes volumes specified via
the mounts API useless when selinux is enabled.
This fix adopts the same selinux label for volumes on the mounts API as on
binds.
Note in the case of both the `Binds` API and the `Mounts` API, the
selinux label is only applied when the volume driver is the `local`
driver.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Use strongly typed errors to set HTTP status codes.
Error interfaces are defined in the api/errors package and errors
returned from controllers are checked against these interfaces.
Errors can be wraeped in a pkg/errors.Causer, as long as somewhere in the
line of causes one of the interfaces is implemented. The special error
interfaces take precedence over Causer, meaning if both Causer and one
of the new error interfaces are implemented, the Causer is not
traversed.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Closes#32663 by adding CreatedAt field when volume is created.
Displaying CreatedAt value when volume is inspected
Adding tests to verfiy the new field is correctly populated
Signed-off-by: Marianna <mtesselh@gmail.com>
Moving CreatedAt tests from the CLI
Moving the tests added for the newly added CreatedAt field for Volume, from CLI to API tests
Signed-off-by: Marianna <mtesselh@gmail.com>
In some cases a mount spec would not be properly backported which could
lead to accidental removal of the underlying volume on container remove
(which should never happen with named volumes).
Adds unit tests for this as well. Unfortunately I had to add a daemon
depdency for the backport function due to looking up `VolumesFrom`
specs.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 29999 where it was not
possible to mask these items (like important non-removable stuff)
from `docker system prune`.
This fix adds `label` and `label!` field for `--filter` in `system prune`,
so that it is possible to selectively prune items like:
```
$ docker container prune --filter label=foo
$ docker container prune --filter label!=bar
```
Additional unit tests and integration tests have been added.
This fix fixes 29999.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the issue raised in 21845. The issue with 21845
is that if multiple `--volumes-from` with the same destination has been
specified, then one volume will be overridden by the other. This will mess
up with volumes reference and prevent the overridden volume from
being removed at the end.
Issue 21845 was observed with `docker-compose` though it is possible to
emulate the same behavior with `docker` alone:
```
$ cat Dockerfile
FROM busybox
VOLUME ["/tmp/data"]
$ docker build -t vimage .
$ docker run --name=data1 vimage true
$ docker run --name=data2 vimage true
$ docker run --name=app --volumes-from=data1 --volumes-from=data2 -d busybox top
$ docker rm -f -v $(docker ps -aq)
$ docker volume ls
$ docker volume rm ...
```
NOTE: Second case:
```
$ cat Dockerfile
FROM busybox
VOLUME ["/tmp/data"]
$ docker build -t vimage .
$ docker run --name=data1 vimage true
$ docker run --name=data2 vimage true
$ docker run --name=app --volumes-from=data1 --volumes-from=data2 -v /tmp/data:/tmp/data -d busybox top
$ docker rm -f -v $(docker ps -aq)
$ docker volume ls
$ docker volume rm ...
```
NOTE: Third case: Combination of --volumes-from and `HostConfig.Mounts` (API only)
This fix tries to address the issue by return an error if duplicate
mount points was used with `--volumes-from`.
An integration test has been added.
This fix fixes 21845.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 25545 where
volume options at the creation time is not showed up
in `docker volume inspect`.
This fix adds the field `Options` in `Volume` type and
persist the options in volume db so that `volume inspect`
could display the options.
This fix adds a couple of test cases to cover the changes.
This fix fixes 25545.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
`Mounts` allows users to specify in a much safer way the volumes they
want to use in the container.
This replaces `Binds` and `Volumes`, which both still exist, but
`Mounts` and `Binds`/`Volumes` are exclussive.
The CLI will continue to use `Binds` and `Volumes` due to concerns with
parsing the volume specs on the client side and cross-platform support
(for now).
The new API follows exactly the services mount API.
Example usage of `Mounts`:
```
$ curl -XPOST localhost:2375/containers/create -d '{
"Image": "alpine:latest",
"HostConfig": {
"Mounts": [{
"Type": "Volume",
"Target": "/foo"
},{
"Type": "bind",
"Source": "/var/run/docker.sock",
"Target": "/var/run/docker.sock",
},{
"Type": "volume",
"Name": "important_data",
"Target": "/var/data",
"ReadOnly": true,
"VolumeOptions": {
"DriverConfig": {
Name: "awesomeStorage",
Options: {"size": "10m"},
Labels: {"some":"label"}
}
}]
}
}'
```
There are currently 2 types of mounts:
- **bind**: Paths on the host that get mounted into the
container. Paths must exist prior to creating the container.
- **volume**: Volumes that persist after the
container is removed.
Not all fields are available in each type, and validation is done to
ensure these fields aren't mixed up between types.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This is similar to network scopes where a volume can either be `local`
or `global`. A `global` volume is one that exists across the entire
cluster where as a `local` volume exists on a single engine.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
In order to be consistent on creation of volumes for bind mounts
we need to create the source directory if it does not exist and the
user specified he wants it relabeled.
Can not do this lower down the stack, since we are not passing in the
mode fields.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Implements a `CachedPath` function on the volume plugin adapter that we
call from the volume list function instead of `Path.
If a driver does not implement `CachedPath` it will just call `Path`.
Also makes sure we store the path on Mount and remove the path on
Unmount.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
