I was trying to find out why `docker info` was sometimes slow so
plumbing a context through to propagate trace data through.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Change return value in function signature and return fatal errors so
they can actually be reported to the caller instead of just being logged
to daemon log.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This only makes the containerd ImageService implementation respect
context cancellation though.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Co-authored-by: Nicolas De Loof <nicolas.deloof@gmail.com>
Co-authored-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The singleflight function was capturing the context.Context of the first
caller that invoked the `singleflight.Do`. This could cause all
concurrent calls to be cancelled when the first request is cancelled.
singleflight calls were also moved from the ImageService to Daemon, to
avoid having to implement this logic in both graphdriver and containerd
based image services.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This is only used for tests, and the key is not verified anymore, so
instead of creating a key and storing it, we can just use an ad-hoc
one.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make the function name more generic, as it's no longer used only
for graphdrivers but also for snapshotters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the information stored as part of the container for the error-message,
instead of querying the current storage driver from the daemon.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Use the default (0) value to indicate "not set", which simplifies
working with these configuration options, preventing the need to
use intermediate variables etc.
While changing this code, also making some small cleanups, such
as replacing "fmt.Sprintf()" for "strconv" variants.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
I think this was there for historic reasons (may have been goimports expected
this, and we used to have a linter that wanted it), but it's not needed, so
let's remove it (to make my IDE less complaining about unneeded aliases).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes the function a bit more idiomatic, and leaves it to the caller to
decide wether or not the error can be ignored.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
None of the implementations used return an error, so removing the error
return can simplify using these.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These logs were meant to be logged when starting the daemon. Moving the logs
to the daemon startup code (which also prints similar messages) instead of
having the images service log them.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This interface only had a single implementation (xfer.LayerDownloadManager),
and all places where it was used already imported the xfer package.
Removing the interface, also makes it a closer match to the "upload" part,
as `xfer.LayerUploadManager()` did not use an interface.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows us to cache manifests and avoid extra round trips to the
registry for content we already know about.
dockerd currently does not support containerd on Windows, so this does
not store manifests on Windows, yet.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Moby works perfectly when you are in a situation when one has a good and stable
internet connection. Operating in area's where internet connectivity is likely
to be lost in undetermined intervals, like a satellite connection or 4G/LTE in
rural area's, can become a problem when pulling a new image. When connection is
lost while image layers are being pulled, Moby will try to reconnect up to 5 times.
If this fails, the incompletely downloaded layers are lost will need to be completely
downloaded again during the next pull request. This means that we are using more
data than we might have to.
Pulling a layer multiple times from the start can become costly over a satellite
or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and
Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum
download attempts. The maximum download attempts is currently set at 5
(distribution/xfer/download.go). I would like to change this constant to a variable
that the user can set. The default will still be 5, so nothing will change from
the current version unless specified when starting the daemon with the added flag
or in the config file.
I added a default value of 5 for DefaultMaxDownloadAttempts and a settable
max-download-attempts in the daemon config file. It is also added to the config
of dockerd so it can be set with a flag when starting the daemon. This value gets
stored in the imageService of the daemon when it is initiated and can be passed
to the NewLayerDownloadManager as a parameter. It will be stored in the
LayerDownloadManager when initiated. This enables us to set the max amount of
retries in makeDownoadFunc equal to the max download attempts.
I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads.
You can pull this version and test in a development container. Either create a config
`file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use
`dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading
a container and disconnect from the internet whilst downloading. The result would
be that it stops pulling after three attempts.
Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
In info, we only need the number of images, but `CountImages` was
getting the whole map of images and then grabbing the length from that.
This causes a lot of unnecessary CPU usage and memory allocations, which
increases with O(n) on the number of images.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
