The field will still be present in the response, but will always be
`false`.
Searching for `is-automated=true` will yield no results, while
`is-automated=false` will effectively be a no-op.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Don't change the behavior for older clients and keep the same behavior.
Otherwise client can't opt-out (because `ReadOnlyNonRecursive` is
unsupported before 1.44).
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.20 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API v1.23 and older are deprecated, so we can remove the code to adjust
responses for API v1.19 and lower.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
API versions before 1.19 allowed CpuShares that were greater than the maximum
or less than the minimum supported by the kernel, and relied on the kernel to
do the right thing.
Commit ed39fbeb2a introduced code to adjust the
CPU shares to be within the accepted range when using API version 1.18 or
lower.
API v1.23 and older are deprecated, so we can remove support for this
functionality.
Currently, there's no validation for CPU shares to be within an acceptable
range; a TODO was added to add validation for this option, and to use the
`linuxMinCPUShares` and `linuxMaxCPUShares` consts for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 4f47013feb introduced a new validation step to make sure no
IPv6 subnet is configured on a network which has EnableIPv6=false.
Commit 5d5eeac310 then removed that validation step and automatically
enabled IPv6 for networks with a v6 subnet. But this specific commit
was reverted in c59e93a67b and now the error introduced by 4f47013feb
is re-introduced.
But it turns out some users expect a network created with an IPv6
subnet and EnableIPv6=false to actually have no IPv6 connectivity.
This restores that behavior.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
The API's EndpointConfig struct has a MacAddress field that's used for
both the configured address, and the current address (which may be generated).
A configured address must be restored when a container is restarted, but a
generated address must not.
The previous attempt to differentiate between the two, without adding a field
to the API's EndpointConfig that would show up in 'inspect' output, was a
field in the daemon's version of EndpointSettings, MACOperational. It did
not work, MACOperational was set to true when a configured address was
used. So, while it ensured addresses were regenerated, it failed to preserve
a configured address.
So, this change removes that code, and adds DesiredMacAddress to the wrapped
version of EndpointSettings, where it is persisted but does not appear in
'inspect' results. Its value is copied from MacAddress (the API field) when
a container is created.
Signed-off-by: Rob Murray <rob.murray@docker.com>
These types were deprecated in v25.0, and moved to api/types/container;
This patch removes the aliases for;
- api/types.ResizeOptions (deprecated in 95b92b1f97)
- api/types.ContainerAttachOptions (deprecated in 30f09b4a1a)
- api/types.ContainerCommitOptions (deprecated in 9498d897ab)
- api/types.ContainerRemoveOptions (deprecated in 0f77875220)
- api/types.ContainerStartOptions (deprecated in 7bce33eb0f)
- api/types.ContainerListOptions (deprecated in 9670d9364d)
- api/types.ContainerLogsOptions (deprecated in ebef4efb88)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in v25.0, and moved to api/types/swarm;
This patch removes the aliases for;
- api/types.ServiceUpdateResponse (deprecated in 5b3e6555a3)
- api/types.ServiceCreateResponse (deprecated in ec69501e94)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in 48cacbca24
(v25.0), and moved to api/types/image.
This patch removes the aliases for;
- api/types.ImageDeleteResponseItem
- api/types.ImageSummary
- api/types.ImageMetadata
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in b688af2226
(v25.0), and moved to api/types/checkpoint.
This patch removes the aliases for;
- api/types.CheckpointCreateOptions
- api/types.CheckpointListOptions
- api/types.CheckpointDeleteOptions
- api/types.Checkpoint
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These types were deprecated in c90229ed9a
(v25.0), and moved to api/types/system.
This patch removes the aliases for;
- api/types.Info
- api/types.Commit
- api/types.PluginsInfo
- api/types.NetworkAddressPool
- api/types.Runtime
- api/types.SecurityOpt
- api/types.KeyValue
- api/types.DecodeSecurityOptions
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
To prevent a circular import between api/types and api/types image,
the RequestPrivilegeFunc reference was not moved, but defined as
part of the PullOptions / PushOptions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `GetImageOpts` struct is used for options to be passed to the backend,
and are not used in client code. This struct currently is intended for internal
use only.
This patch moves the `GetImageOpts` struct to the backend package to prevent
it being imported in the client, and to make it more clear that this is part
of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`VolumeOptions` now has a `Subpath` field which allows to specify a path
relative to the volume that should be mounted as a destination.
Symlinks are supported, but they cannot escape the base volume
directory.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
The following fields are never written and are now marked as deprecated:
- `HairpinMode`
- `LinkLocalIPv6Address`
- `LinkLocalIPv6PrefixLen`
- `SecondaryIPAddress`
- `SecondaryIPv6Addresses`
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Instead of special-casing anonymous endpoints in libnetwork, let the
daemon specify what (non fully qualified) DNS names should be associated
to container's endpoints.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
These fields were an implementation detail of the classic image builder
and are empty when using buildkit.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This struct is intended for internal use only for the backend, and is
not intended to be used externally.
This moves the plugin-related `NetworkListConfig` types to the backend
package to prevent it being imported in the client, and to make it more
clear that this is part of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These structs are intended for internal use only for the backend, and are
not intended to be used externally.
This moves the plugin-related `PluginRmConfig`, `PluginEnableConfig`, and
`PluginDisableConfig` types to the backend package to prevent them being
imported in the client, and to make it more clear that this is part of
internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `ContainerCreateConfig` and `ContainerRmConfig` structs are used for
options to be passed to the backend, and are not used in client code.
Thess struct currently is intended for internal use only (for example, the
`AdjustCPUShares` is an internal implementation details to adjust the container's
config when older API versions are used).
Somewhat ironically, the signature of the Backend has a nicer UX than that
of the client's `ContainerCreate` signature (which expects all options to
be passed as separate arguments), so we may want to update that signature
to be closer to what the backend is using, but that can be left as a future
exercise.
This patch moves the `ContainerCreateConfig` and `ContainerRmConfig` structs
to the backend package to prevent it being imported in the client, and to make
it more clear that this is part of internal APIs, and not public-facing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Having a sandbox/container-wide MacAddress field makes little sense
since a container can be connected to multiple networks at the same
time. This field is an artefact of old times where a container could be
connected to a single network only.
As we now have a way to specify per-endpoint mac address, this field is
now deprecated.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prior to this commit, only container.Config had a MacAddress field and
it's used only for the first network the container connects to. It's a
relic of old times where custom networks were not supported.
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
Fixes#18864, #20648, #33561, #40901.
[This GH comment][1] makes clear network name uniqueness has never been
enforced due to the eventually consistent nature of Classic Swarm
datastores:
> there is no guaranteed way to check for duplicates across a cluster of
> docker hosts.
And this is further confirmed by other comments made by @mrjana in that
same issue, eg. [this one][2]:
> we want to adopt a schema which can pave the way in the future for a
> completely decentralized cluster of docker hosts (if scalability is
> needed).
This decentralized model is what Classic Swarm was trying to be. It's
been superseded since then by Docker Swarm, which has a centralized
control plane.
To circumvent this drawback, the `NetworkCreate` endpoint accepts a
`CheckDuplicate` flag. However it's not perfectly reliable as it won't
catch concurrent requests.
Due to this design decision, API clients like Compose have to implement
workarounds to make sure names are really unique (eg.
docker/compose#9585). And the daemon itself has seen a string of issues
due to that decision, including some that aren't fixed to this day (for
instance moby/moby#40901):
> The problem is, that if you specify a network for a container using
> the ID, it will add that network to the container but it will then
> change it to reference the network by using the name.
To summarize, this "feature" is broken, has no practical use and is a
source of pain for Docker users and API consumers. So let's just remove
it for _all_ API versions.
[1]: https://github.com/moby/moby/issues/18864#issuecomment-167201414
[2]: https://github.com/moby/moby/issues/18864#issuecomment-167202589
Signed-off-by: Albin Kerouanton <albinker@gmail.com>
