Windows Server 2016 (RS1) reached end of support, and Docker Desktop requires
Windows 10 V19H2 (version 1909, build 18363) as a minimum.
This patch makes Windows Server RS5 / ltsc2019 (build 17763) the minimum version
to run the daemon, and removes some hacks for older versions of Windows.
There is one check remaining that checks for Windows RS3 for a workaround
on older versions, but recent changes in Windows seemed to have regressed
on the same issue, so I kept that code for now to check if we may need that
workaround (again);
085c6a98d5/daemon/graphdriver/windows/windows.go (L319-L341)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This was originally added to solve a CLI usability issue related to `docker-machine` and `docker` (explicitly *not* `dockerd`) -- the "docker/cli" repository has a separate copy of this entire `opts` package, so isn't even using this implementation.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
The daemon can print the proxy configuration as part of error-messages,
and when reloading the daemon configuration (SIGHUP). Make sure that
the configuration is sanitized before printing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows configuring the daemon's proxy server through the daemon.json con-
figuration file or command-line flags configuration file, in addition to the
existing option (through environment variables).
Configuring environment variables on Windows to configure a service is more
complicated than on Linux, and adding alternatives for this to the daemon con-
figuration makes the configuration more transparent and easier to use.
The configuration as set through command-line flags or through the daemon.json
configuration file takes precedence over env-vars in the daemon's environment,
which allows the daemon to use a different proxy. If both command-line flags
and a daemon.json configuration option is set, an error is produced when starting
the daemon.
Note that this configuration is not "live reloadable" due to Golang's use of
`sync.Once()` for proxy configuration, which means that changing the proxy
configuration requires a restart of the daemon (reload / SIGHUP will not update
the configuration.
With this patch:
cat /etc/docker/daemon.json
{
"http-proxy": "http://proxytest.example.com:80",
"https-proxy": "https://proxytest.example.com:443"
}
docker pull busybox
Using default tag: latest
Error response from daemon: Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
docker build .
Sending build context to Docker daemon 89.28MB
Step 1/3 : FROM golang:1.16-alpine AS base
Get "https://registry-1.docker.io/v2/": proxyconnect tcp: dial tcp: lookup proxytest.example.com on 127.0.0.11:53: no such host
Integration tests were added to test the behavior:
- verify that the configuration through all means are used (env-var,
command-line flags, damon.json), and used in the expected order of
preference.
- verify that conflicting options produce an error.
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds support for 2 runtimes on Windows, one that uses the built-in
HCSv1 integration and another which uses containerd with the runhcs
shim.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The io/ioutil package has been deprecated in Go 1.16. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Perhaps the testutils package in the past had an `init()` function to set up
specific things, but it no longer has. so these imports were doing nothing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit b237189e6c implemented an option to
set the default seccomp profile in the daemon configuration. When that PR
was reviewed, it was discussed to have the option accept the path to a custom
profile JSON file; https://github.com/moby/moby/pull/26276#issuecomment-253546966
However, in the implementation, the special "unconfined" value was not taken into
account. The "unconfined" value is meant to disable seccomp (more factually:
run with an empty profile).
While it's likely possible to achieve this by creating a file with an an empty
(`{}`) profile, and passing the path to that file, it's inconsistent with the
`--security-opt seccomp=unconfined` option on `docker run` and `docker create`,
which is both confusing, and makes it harder to use (especially on Docker Desktop,
where there's no direct access to the VM's filesystem).
This patch adds the missing check for the special "unconfined" value.
Co-authored-by: Tianon Gravi <admwiggin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's the only location where this is used, and it's quite specific
to dockerd (not really a reusable function for external use), so
moving it into that package.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "quiet" argument was only used in a single place (at daemon startup), and
every other use had to pass "false" to prevent this function from logging
warnings.
Now that SysInfo contains the warnings that occurred when collecting the
system information, we can make leave it up to the caller to use those
warnings (and log them if wanted).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since this command is part of the official distribution and even
required for tests, let's move this up to the main cmd's.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Fixes#36911
If config file is invalid we'll exit anyhow, so this just prevents
the daemon from starting if the configuration is fine.
Mainly useful for making config changes and restarting the daemon
iff the config is valid.
Signed-off-by: Rich Horwood <rjhorwood@apple.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Anca Iordache <anca.iordache@docker.com>
The LCOW implementation in dockerd has been deprecated in favor of re-implementation
in containerd (in progress). Microsoft started removing the LCOW V1 code from the
build dependencies we use in Microsoft/opengcs (soon to be part of Microsoft/hcshhim),
which means that we need to start removing this code.
This first step removes the lcow graphdriver, the LCOW initialization code, and
some LCOW-related utilities.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
After moving libnetwork to this repo, we need to update all the import
paths for libnetwork to point to docker/docker/libnetwork instead of
docker/libnetwork.
This change implements that.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as domain.com, registry.com, mytest.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signal systemd when we start shutting down to complement the "READY" notify
that was originally implemented in 97088ebef7
From [sd_notify(3)](https://www.freedesktop.org/software/systemd/man/sd_notify.html#STOPPING=1)
> STOPPING=1
> Tells the service manager that the service is beginning its shutdown. This is useful
> to allow the service manager to track the service's internal state, and present it to
> the user.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
libcontainer does not guarantee a stable API, and is not intended
for external consumers.
this patch replaces some uses of libcontainer/cgroups with
containerd/cgroups.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The daemon expects to manage/handle everything going into the containerd namespace it uses, and things break when it shares that namespace with a second instance, so we should expose these flags and expect users that want two daemons sharing a containerd instance to use separate namespaces for them.
Signed-off-by: Tianon Gravi <admwiggin@gmail.com>
dockerd currently sets the oom-score-adjust itself. This functionality
was added when we did not yet run dockerd as a systemd service.
Now that we do, it's better to instead have systemd handle this.
Keeping the option itself for situations where dockerd is started
manually or without using systemd.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
People keep doing this and getting pwned because they accidentally left
it exposed to the internet.
The warning about doing this has been there forever.
This introduces a sleep after warning.
To disable the extra sleep users must explicitly specify `--tls=false`
or `--tlsverify=false`
Warning also specifies this sleep will be removed in the next release
where the flag will be required if running unauthenticated.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch adds a new "prune" event type to indicate that pruning of a resource
type completed.
This event-type can be used on systems that want to perform actions after
resources have been cleaned up. For example, Docker Desktop performs an fstrim
after resources are deleted (https://github.com/linuxkit/linuxkit/tree/v0.7/pkg/trim-after-delete).
While the current (remove, destroy) events can provide information on _most_
resources, there is currently no event triggered after the BuildKit build-cache
is cleaned.
Prune events have a `reclaimed` attribute, indicating the amount of space that
was reclaimed (in bytes). The attribute can be used, for example, to use as a
threshold for performing fstrim actions. Reclaimed space for `network` events
will always be 0, but the field is added to be consistent with prune events for
other resources.
To test this patch:
Create some resources:
for i in foo bar baz; do \
docker network create network_$i \
&& docker volume create volume_$i \
&& docker run -d --name container_$i -v volume_$i:/volume busybox sh -c 'truncate -s 5M somefile; truncate -s 5M /volume/file' \
&& docker tag busybox:latest image_$i; \
done;
docker pull alpine
docker pull nginx:alpine
echo -e "FROM busybox\nRUN truncate -s 50M bigfile" | DOCKER_BUILDKIT=1 docker build -
Start listening for "prune" events in another shell:
docker events --filter event=prune
Prune containers, networks, volumes, and build-cache:
docker system prune -af --volumes
See the events that are returned:
docker events --filter event=prune
2020-07-25T12:12:09.268491000Z container prune (reclaimed=15728640)
2020-07-25T12:12:09.447890400Z network prune (reclaimed=0)
2020-07-25T12:12:09.452323000Z volume prune (reclaimed=15728640)
2020-07-25T12:12:09.517236200Z image prune (reclaimed=21568540)
2020-07-25T12:12:09.566662600Z builder prune (reclaimed=52428841)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
full diff: https://github.com/spf13/cobra/compare/v0.0.3...v1.0.0
Notable Changes
- Fish completion (including support for Go custom completion)
- API (urgent): Rename BashCompDirectives to ShellCompDirectives
- Remove/replace SetOutput on Command - deprecated
- Custom completions coded in Go (instead of Bash)
- Partial Revert of 922
- Correct documentation for InOrStdin
- Apply formatting to templates
- Revert change so help is printed on stdout again
- Update md2man to v2.0.0
- update viper to v1.4.0
- Update cmd/root.go example in README.md
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 1470697b67 marked this flag
as deprecated, but inadvertedtly used the plural (which is used
for `daemon.json`, but not for the flag name.
This fixes the inccorect name of the flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Close#40484
Note that the support for cgroup v2 isn't ready for production yet,
regardless to rootful or rootless.
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The namespaces com.docker.*, io.docker.*, org.dockerproject.*
have been documented to be reserved for Docker's internal use.
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: Jintao Zhang <zhangjintao9020@gmail.com>
Docker Desktop (on MAC and Windows hosts) allows containers
running inside a Linux VM to connect to the host using
the host.docker.internal DNS name, which is implemented by
VPNkit (DNS proxy on the host)
This PR allows containers to connect to Linux hosts
by appending a special string "host-gateway" to --add-host
e.g. "--add-host=host.docker.internal:host-gateway" which adds
host.docker.internal DNS entry in /etc/hosts and maps it to host-gateway-ip
This PR also add a daemon flag call host-gateway-ip which defaults to
the default bridge IP
Docker Desktop will need to set this field to the Host Proxy IP
so DNS requests for host.docker.internal can be routed to VPNkit
Addresses: https://github.com/docker/for-linux/issues/264
Signed-off-by: Arko Dasgupta <arko.dasgupta@docker.com>
This feature was used by docker build --stream and it was kept experimental.
Users of this endpoint should enable BuildKit anyway by setting Version to BuilderBuildKit.
Signed-off-by: Tibor Vass <tibor@docker.com>
Moby works perfectly when you are in a situation when one has a good and stable
internet connection. Operating in area's where internet connectivity is likely
to be lost in undetermined intervals, like a satellite connection or 4G/LTE in
rural area's, can become a problem when pulling a new image. When connection is
lost while image layers are being pulled, Moby will try to reconnect up to 5 times.
If this fails, the incompletely downloaded layers are lost will need to be completely
downloaded again during the next pull request. This means that we are using more
data than we might have to.
Pulling a layer multiple times from the start can become costly over a satellite
or 4G/LTE connection. As these techniques (especially 4G) quite common in IoT and
Moby is used to run Azure IoT Edge devices, I would like to add a settable maximum
download attempts. The maximum download attempts is currently set at 5
(distribution/xfer/download.go). I would like to change this constant to a variable
that the user can set. The default will still be 5, so nothing will change from
the current version unless specified when starting the daemon with the added flag
or in the config file.
I added a default value of 5 for DefaultMaxDownloadAttempts and a settable
max-download-attempts in the daemon config file. It is also added to the config
of dockerd so it can be set with a flag when starting the daemon. This value gets
stored in the imageService of the daemon when it is initiated and can be passed
to the NewLayerDownloadManager as a parameter. It will be stored in the
LayerDownloadManager when initiated. This enables us to set the max amount of
retries in makeDownoadFunc equal to the max download attempts.
I also added some tests that are based on maxConcurrentDownloads/maxConcurrentUploads.
You can pull this version and test in a development container. Either create a config
`file /etc/docker/daemon.json` with `{"max-download-attempts"=3}``, or use
`dockerd --max-download-attempts=3 -D &` to start up the dockerd. Start downloading
a container and disconnect from the internet whilst downloading. The result would
be that it stops pulling after three attempts.
Signed-off-by: Lukas Heeren <lukas-heeren@hotmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cmd/dockerd/config.go:50:18: Error return value of `flags.MarkHidden` is not checked (errcheck)
cmd/dockerd/config.go:55:22: Error return value of `flags.MarkDeprecated` is not checked (errcheck)
cmd/dockerd/config.go:78:18: Error return value of `flags.MarkHidden` is not checked (errcheck)
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Format the source according to latest goimports.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix TODO: move into startMetricsServer()
Fix errors.Wrap return nil when passed err is nil
Co-Authored-By: Sebastiaan van Stijn <thaJeztah@users.noreply.github.com>
Signed-off-by: HuanHuan Ye <logindaveye@gmail.com>
also renamed the non-windows variant of this file to be
consistent with other files in this package
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This hack was added to fix a compatibility with clients
that were built using Go 1.5 and older (added in 3d6f5984f5)
This hack causes some problems with current clients; with Go 1.5 and older
no longer being supported for some time, and being several years old, it
should now be ok to remove this hack altogether.
People using tools that are built with those versions of Go wouldn't have
updated those for years, and are probably out of date anyway; that's not
something we can continue taking into account.
This will affect docker clients (the docker cli) for docker 1.12 and older.
Those versions have reached EOL a long time ago (and have known unpatched
vulnerabilities), so should no longer be used anyway, but We should add
a nebtuib in the release notes, just in case someone, somewhere, still
has such old tools.
For those affected, using a more recent client (and if needed, setting
the DOCKER_API_VERSION environment variable to the needed API version)
should provide a way out.
This reverts the changes originally made in; #22000 and #22888,
which were to address #20865.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change:
dockerd -H unix:///run/docker.sock -H unix:///run/docker.sock -H unix:///run/docker.sock
...
INFO[2019-07-13T00:02:36.195090937Z] Daemon has completed initialization
INFO[2019-07-13T00:02:36.215940441Z] API listen on /run/docker.sock
INFO[2019-07-13T00:02:36.215933172Z] API listen on /run/docker.sock
INFO[2019-07-13T00:02:36.215990566Z] API listen on /run/docker.sock
After this change:
dockerd -H unix:///run/docker.sock -H unix:///run/docker.sock -H unix:///run/docker.sock
...
INFO[2019-07-13T00:01:37.533579874Z] Daemon has completed initialization
INFO[2019-07-13T00:01:37.567045771Z] API listen on /run/docker.sock
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This allows our tests, which all share a containerd instance, to be a
bit more isolated by setting the containerd namespaces to the generated
daemon ID's rather than the default namespaces.
This came about because I found in some cases we had test daemons
failing to start (really very slow to start) because it was (seemingly)
processing events from other tests.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
These options configure the parent cgroup, not the default for containers,
nor the daemon itself, so adding that information to the flag description
to make this slightly more clear.
relates to 56f77d5ade (#23430) which implemented
these flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This reverts commit 98fc09128b in order to
keep registry v2 schema1 handling and libtrust-key-based engine ID.
Because registry v2 schema1 was not officially deprecated and
registries are still relying on it, this patch puts its logic back.
However, registry v1 relics are not added back since v1 logic has been
removed a while ago.
This also fixes an engine upgrade issue in a swarm cluster. It was relying
on the Engine ID to be the same upon upgrade, but the mentioned commit
modified the logic to use UUID and from a different file.
Since the libtrust key is always needed to support v2 schema1 pushes,
that the old engine ID is based on the libtrust key, and that the engine ID
needs to be conserved across upgrades, adding a UUID-based engine ID logic
seems to add more complexity than it solves the problems.
Hence reverting the engine ID changes as well.
Signed-off-by: Tibor Vass <tibor@docker.com>
This adds both a daemon-wide flag and a container creation property:
- Set the `CgroupnsMode: "host|private"` HostConfig property at
container creation time to control what cgroup namespace the container
is created in
- Set the `--default-cgroupns-mode=host|private` daemon flag to control
what cgroup namespace containers are created in by default
- Set the default if the daemon flag is unset to "host", for backward
compatibility
- Default to CgroupnsMode: "host" for client versions < 1.40
Signed-off-by: Rob Gulewich <rgulewich@netflix.com>
The `--rootless` flag had a couple of issues:
* #38702: euid=0, $USER="root" but no access to cgroup ("rootful" Docker in rootless Docker)
* #39009: euid=0 but $USER="docker" (rootful boot2docker)
To fix#38702, XDG dirs are ignored as in rootful Docker, unless the
dockerd is directly running under RootlessKit namespaces.
RootlessKit detection is implemented by checking whether `$ROOTLESSKIT_STATE_DIR` is set.
To fix#39009, the non-robust `$USER` check is now completely removed.
The entire logic can be illustrated as follows:
```
withRootlessKit := getenv("ROOTLESSKIT_STATE_DIR")
rootlessMode := withRootlessKit || cliFlag("--rootless")
honorXDG := withRootlessKit
useRootlessKitDockerProxy := withRootlessKit
removeCgroupSpec := rootlessMode
adjustOOMScoreAdj := rootlessMode
```
Close#39024Fix#38702#39009
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
`defer r.WaitTimeout(10s)` was in a wrong place and had caused the
daemon to hang for 10 seconds.
Fix#39025
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the first step in refactoring moby (dockerd) to use containerd on Windows.
Similar to the current model in Linux, this adds the option to enable it for runtime.
It does not switch the graphdriver to containerd snapshotters.
- Refactors libcontainerd to a series of subpackages so that either a
"local" containerd (1) or a "remote" (2) containerd can be loaded as opposed
to conditional compile as "local" for Windows and "remote" for Linux.
- Updates libcontainerd such that Windows has an option to allow the use of a
"remote" containerd. Here, it communicates over a named pipe using GRPC.
This is currently guarded behind the experimental flag, an environment variable,
and the providing of a pipename to connect to containerd.
- Infrastructure pieces such as under pkg/system to have helper functions for
determining whether containerd is being used.
(1) "local" containerd is what the daemon on Windows has used since inception.
It's not really containerd at all - it's simply local invocation of HCS APIs
directly in-process from the daemon through the Microsoft/hcsshim library.
(2) "remote" containerd is what docker on Linux uses for it's runtime. It means
that there is a separate containerd service running, and docker communicates over
GRPC to it.
To try this out, you will need to start with something like the following:
Window 1:
containerd --log-level debug
Window 2:
$env:DOCKER_WINDOWS_CONTAINERD=1
dockerd --experimental -D --containerd \\.\pipe\containerd-containerd
You will need the following binary from github.com/containerd/containerd in your path:
- containerd.exe
You will need the following binaries from github.com/Microsoft/hcsshim in your path:
- runhcs.exe
- containerd-shim-runhcs-v1.exe
For LCOW, it will require and initrd.img and kernel in `C:\Program Files\Linux Containers`.
This is no different to the current requirements. However, you may need updated binaries,
particularly initrd.img built from Microsoft/opengcs as (at the time of writing), Linuxkit
binaries are somewhat out of date.
Note that containerd and hcsshim for HCS v2 APIs do not yet support all the required
functionality needed for docker. This will come in time - this is a baby (although large)
step to migrating Docker on Windows to containerd.
Note that the HCS v2 APIs are only called on RS5+ builds. RS1..RS4 will still use
HCS v1 APIs as the v2 APIs were not fully developed enough on these builds to be usable.
This abstraction is done in HCSShim. (Referring specifically to runtime)
Note the LCOW graphdriver still uses HCS v1 APIs regardless.
Note also that this does not migrate docker to use containerd snapshotters
rather than graphdrivers. This needs to be done in conjunction with Linux also
doing the same switch.
As people are using the UUID in `docker info` that was based on the v1 manifest signing key, replace
with a UUID instead.
Remove deprecated `--disable-legacy-registry` option that was scheduled to be removed in 18.03.
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
This fix fixes the following issue with `go vet`:
```
$ go tool vet cmd/dockerd/daemon.go
cmd/dockerd/daemon.go:163: the cancel function is not used on all paths (possible context leak)
cmd/dockerd/daemon.go:167: this return statement may be reached without using the cancel var defined on line 163
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Please refer to `docs/rootless.md`.
TLDR:
* Make sure `/etc/subuid` and `/etc/subgid` contain the entry for you
* `dockerd-rootless.sh --experimental`
* `docker -H unix://$XDG_RUNTIME_DIR/docker.sock run ...`
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
`time.After` keeps a timer running until the specified duration is
completed. It also allocates a new timer on each call. This can wind up
leaving lots of uneccessary timers running in the background that are
not needed and consume resources.
Instead of `time.After`, use `time.NewTimer` so the timer can actually
be stopped.
In some of these cases it's not a big deal since the duraiton is really
short, but in others it is much worse.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Some messages are logged before the logrus format was set,
therefore resulting in inconsistent log-message formatting
during startup;
Before this patch;
```
dockerd --experimental
WARN[0000] Running experimental build
INFO[2018-11-24T11:24:05.615249610Z] libcontainerd: started new containerd process pid=132
INFO[2018-11-24T11:24:05.615348322Z] parsed scheme: "unix" module=grpc
...
```
With this patch applied;
```
dockerd --experimental
WARN[2018-11-24T13:41:51.199057259Z] Running experimental build
INFO[2018-11-24T13:41:51.200412645Z] libcontainerd: started new containerd process pid=293
INFO[2018-11-24T13:41:51.200523051Z] parsed scheme: "unix" module=grpc
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change is needed for 32 bit targets as the default type is int32
and the handle constants do not fit into it.
Signed-off-by: Jiri Appl <jiria@microsoft.com>
