# Coturn TURN SERVER configuration file # # Boolean values note: where a boolean value is supposed to be used, # you can use '0', 'off', 'no', 'false', or 'f' as 'false, # and you can use '1', 'on', 'yes', 'true', or 't' as 'true' # If the value is missing, then it means 'true' by default. # # Listener interface device (optional, Linux only). # NOT RECOMMENDED. # #listening-device=eth0 # TURN listener port for UDP and TCP (Default: 3478). # Note: actually, TLS & DTLS sessions can connect to the # "plain" TCP & UDP port(s), too - if allowed by configuration. # #listening-port=3478 # TURN listener port for TLS (Default: 5349). # Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS # port(s), too - if allowed by configuration. The TURN server # "automatically" recognizes the type of traffic. Actually, two listening # endpoints (the "plain" one and the "tls" one) are equivalent in terms of # functionality; but Coturn keeps both endpoints to satisfy the RFC 5766 specs. # For secure TCP connections, Coturn currently supports # TLS version 1.0, 1.1 and 1.2. # For secure UDP connections, Coturn supports DTLS version 1. # #tls-listening-port=5349 # Alternative listening port for UDP and TCP listeners; # default (or zero) value means "listening port plus one". # This is needed for RFC 5780 support # (STUN extension specs, NAT behavior discovery). The TURN Server # supports RFC 5780 only if it is started with more than one # listening IP address of the same family (IPv4 or IPv6). # RFC 5780 is supported only by UDP protocol, other protocols # are listening to that endpoint only for "symmetry". # #alt-listening-port=0 # Alternative listening port for TLS and DTLS protocols. # Default (or zero) value means "TLS listening port plus one". # #alt-tls-listening-port=0 # Some network setups will require using a TCP reverse proxy in front # of the STUN server. If the proxy port option is set a single listener # is started on the given port that accepts connections using the # haproxy proxy protocol v2. # (https://www.haproxy.org/download/1.8/doc/proxy-protocol.txt) # #tcp-proxy-port=5555 # Listener IP address of relay server. Multiple listeners can be specified. # If no IP(s) specified in the config file or in the command line options, # then all IPv4 and IPv6 system IPs will be used for listening. # #listening-ip=172.17.19.101 #listening-ip=10.207.21.238 #listening-ip=2607:f0d0:1002:51::4 # Auxiliary STUN/TURN server listening endpoint. # Aux servers have almost full TURN and STUN functionality. # The (minor) limitations are: # # 1) Auxiliary servers do not have alternative ports and # they do not support STUN RFC 5780 functionality (CHANGE REQUEST). # # 2) Auxiliary servers also are never returning ALTERNATIVE-SERVER reply. # # Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6. # # There may be multiple aux-server options, each will be used for listening # to client requests. # #aux-server=172.17.19.110:33478 #aux-server=[2607:f0d0:1002:51::4]:33478 # (recommended for older Linuxes only) # Automatically balance UDP traffic over auxiliary servers (if configured). # The load balancing is using the ALTERNATE-SERVER mechanism. # The TURN client must support 300 ALTERNATE-SERVER response for this # functionality. # #udp-self-balance # Relay interface device for relay sockets (optional, Linux only). # NOT RECOMMENDED. # #relay-device=eth1 # Relay address (the local IP address that will be used to relay the # packets to the peer). # Multiple relay addresses may be used. # The same IP(s) can be used as both listening IP(s) and relay IP(s). # # If no relay IP(s) specified, then the turnserver will apply the default # policy: it will decide itself which relay addresses to be used, and it # will always be using the client socket IP address as the relay IP address # of the TURN session (if the requested relay address family is the same # as the family of the client socket). # #relay-ip=172.17.19.105 #relay-ip=2607:f0d0:1002:51::5 # For Amazon EC2 users: # # TURN Server public/private address mapping, if the server is behind NAT. # In that situation, if a -X is used in form "-X " then that ip will be reported # as relay IP address of all allocations. This scenario works only in a simple case # when one single relay address is be used, and no RFC5780 functionality is required. # That single relay address must be mapped by NAT to the 'external' IP. # The "external-ip" value, if not empty, is returned in XOR-RELAYED-ADDRESS field. # For that 'external' IP, NAT must forward ports directly (relayed port 12345 # must be always mapped to the same 'external' port 12345). # # In more complex case when more than one IP address is involved, # that option must be used several times, each entry must # have form "-X ", to map all involved addresses. # RFC5780 NAT discovery STUN functionality will work correctly, # if the addresses are mapped properly, even when the TURN server itself # is behind A NAT. # # By default, this value is empty, and no address mapping is used. # #external-ip=60.70.80.91 # #OR: # #external-ip=60.70.80.91/172.17.19.101 #external-ip=60.70.80.92/172.17.19.102 # Number of the relay threads to handle the established connections # (in addition to authentication thread and the listener thread). # If explicitly set to 0 then application runs relay process in a # single thread, in the same thread with the listener process # (the authentication thread will still be a separate thread). # # If this parameter is not set, then the default OS-dependent # thread pattern algorithm will be employed. Usually the default # algorithm is optimal, so you have to change this option # if you want to make some fine tweaks. # # In the older systems (Linux kernel before 3.9), # the number of UDP threads is always one thread per network listening # endpoint - including the auxiliary endpoints - unless 0 (zero) or # 1 (one) value is set. # #relay-threads=0 # Lower and upper bounds of the UDP relay endpoints: # (default values are 49152 and 65535) # #min-port=49152 #max-port=65535 # Uncomment to run TURN server in 'normal' 'moderate' verbose mode. # By default the verbose mode is off. #verbose # Uncomment to run TURN server in 'extra' verbose mode. # This mode is very annoying and produces lots of output. # Not recommended under normal circumstances. # #Verbose # Uncomment to use fingerprints in the TURN messages. # By default the fingerprints are off. # #fingerprint # Uncomment to use long-term credential mechanism. # By default no credentials mechanism is used (any user allowed). # #lt-cred-mech # This option is the opposite of lt-cred-mech. # (TURN Server with no-auth option allows anonymous access). # If neither option is defined, and no users are defined, # then no-auth is default. If at least one user is defined, # in this file, in command line or in usersdb file, then # lt-cred-mech is default. # #no-auth # Enable prometheus exporter # If enabled the turnserver will expose an endpoint with stats on a prometheus format # this endpoint is listening on a different port to not conflict with other configurations. # # You can simply run the turnserver and access the port 9641 and path /metrics # # For mor info on the prometheus exporter and metrics # https://prometheus.io/docs/introduction/overview/ # https://prometheus.io/docs/concepts/data_model/ # #prometheus # TURN REST API flag. # (Time Limited Long Term Credential) # Flag that sets a special authorization option that is based upon authentication secret. # # This feature's purpose is to support "TURN Server REST API", see # "TURN REST API" link in the project's page # https://github.com/coturn/coturn/ # # This option is used with timestamp: # # usercombo -> "timestamp:userid" # turn user -> usercombo # turn password -> base64(hmac(secret key, usercombo)) # # This allows TURN credentials to be accounted for a specific user id. # If you don't have a suitable id, then the timestamp alone can be used. # This option is enabled by turning on secret-based authentication. # The actual value of the secret is defined either by the option static-auth-secret, # or can be found in the turn_secret table in the database (see below). # # Read more about it: # - https://tools.ietf.org/html/draft-uberti-behave-turn-rest-00 # - https://www.ietf.org/proceedings/87/slides/slides-87-behave-10.pdf # # Be aware that use-auth-secret overrides some parts of lt-cred-mech. # The use-auth-secret feature depends internally on lt-cred-mech, so if you set # this option then it automatically enables lt-cred-mech internally # as if you had enabled both. # # Note that you can use only one auth mechanism at the same time! This is because, # both mechanisms conduct username and password validation in different ways. # # Use either lt-cred-mech or use-auth-secret in the conf # to avoid any confusion. # #use-auth-secret # 'Static' authentication secret value (a string) for TURN REST API only. # If not set, then the turn server # will try to use the 'dynamic' value in the turn_secret table # in the user database (if present). The database-stored value can be changed on-the-fly # by a separate program, so this is why that mode is considered 'dynamic'. # #static-auth-secret=north # Server name used for # the oAuth authentication purposes. # The default value is the realm name. # #server-name=blackdow.carleon.gov # Flag that allows oAuth authentication. # #oauth # 'Static' user accounts for the long term credentials mechanism, only. # This option cannot be used with TURN REST API. # 'Static' user accounts are NOT dynamically checked by the turnserver process, # so they can NOT be changed while the turnserver is running. # #user=username1:key1 #user=username2:key2 # OR: #user=username1:password1 #user=username2:password2 # # Keys must be generated by turnadmin utility. The key value depends # on user name, realm, and password: # # Example: # $ turnadmin -k -u ninefingers -r north.gov -p youhavetoberealistic # Output: 0xbc807ee29df3c9ffa736523fb2c4e8ee # ('0x' in the beginning of the key is what differentiates the key from # password. If it has 0x then it is a key, otherwise it is a password). # # The corresponding user account entry in the config file will be: # #user=ninefingers:0xbc807ee29df3c9ffa736523fb2c4e8ee # Or, equivalently, with open clear password (less secure): #user=ninefingers:youhavetoberealistic # # SQLite database file name. # # The default file name is /var/db/turndb or /usr/local/var/db/turndb or # /var/lib/turn/turndb. # #userdb=/var/db/turndb # PostgreSQL database connection string in the case that you are using PostgreSQL # as the user database. # This database can be used for the long-term credential mechanism # and it can store the secret value for secret-based timed authentication in TURN REST API. # See http://www.postgresql.org/docs/8.4/static/libpq-connect.html for 8.x PostgreSQL # versions connection string format, see # http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING # for 9.x and newer connection string formats. # #psql-userdb="host= dbname= user= password= connect_timeout=30" # MySQL database connection string in the case that you are using MySQL # as the user database. # This database can be used for the long-term credential mechanism # and it can store the secret value for secret-based timed authentication in TURN REST API. # # Optional connection string parameters for the secure communications (SSL): # ca, capath, cert, key, cipher # (see http://dev.mysql.com/doc/refman/5.1/en/ssl-options.html for the # command options description). # # Use the string format below (space separated parameters, all optional): # #mysql-userdb="host= dbname= user= password= port= connect_timeout= read_timeout=" # If you want to use an encrypted password in the MySQL connection string, # then set the MySQL password encryption secret key file with this option. # # Warning: If this option is set, then the mysql password must be set in "mysql-userdb" in an encrypted format! # If you want to use a cleartext password then do not set this option! # # This is the file path for the aes encrypted secret key used for password encryption. # #secret-key-file=/path/ # MongoDB database connection string in the case that you are using MongoDB # as the user database. # This database can be used for long-term credential mechanism # and it can store the secret value for secret-based timed authentication in TURN REST API. # Use the string format described at http://hergert.me/docs/mongo-c-driver/mongoc_uri.html # #mongo-userdb="mongodb://[username:password@]host1[:port1][,host2[:port2],...[,hostN[:portN]]][/[database][?options]]" # Redis database connection string in the case that you are using Redis # as the user database. # This database can be used for long-term credential mechanism # and it can store the secret value for secret-based timed authentication in TURN REST API. # Use the string format below (space separated parameters, all optional): # #redis-userdb="ip= dbname= password= port= connect_timeout=" # Redis status and statistics database connection string, if used (default - empty, no Redis stats DB used). # This database keeps allocations status information, and it can be also used for publishing # and delivering traffic and allocation event notifications. # The connection string has the same parameters as redis-userdb connection string. # Use the string format below (space separated parameters, all optional): # #redis-statsdb="ip= dbname= password= port= connect_timeout=" # The default realm to be used for the users when no explicit # origin/realm relationship is found in the database, or if the TURN # server is not using any database (just the commands-line settings # and the userdb file). Must be used with long-term credentials # mechanism or with TURN REST API. # # Note: If the default realm is not specified, then realm falls back to the host domain name. # If the domain name string is empty, or set to '(None)', then it is initialized as an empty string. # realm=danwin1210.de # This flag sets the origin consistency # check. Across the session, all requests must have the same # main ORIGIN attribute value (if the ORIGIN was # initially used by the session). # #check-origin-consistency # Per-user allocation quota. # default value is 0 (no quota, unlimited number of sessions per user). # This option can also be set through the database, for a particular realm. # #user-quota=0 # Total allocation quota. # default value is 0 (no quota). # This option can also be set through the database, for a particular realm. # #total-quota=0 # Max bytes-per-second bandwidth a TURN session is allowed to handle # (input and output network streams are treated separately). Anything above # that limit will be dropped or temporarily suppressed (within # the available buffer limits). # This option can also be set through the database, for a particular realm. # #max-bps=0 # # Maximum server capacity. # Total bytes-per-second bandwidth the TURN server is allowed to allocate # for the sessions, combined (input and output network streams are treated separately). # # bps-capacity=0 # Uncomment if no UDP client listener is desired. # By default UDP client listener is always started. # #no-udp # Uncomment if no TCP client listener is desired. # By default TCP client listener is always started. # #no-tcp # Uncomment if no TLS client listener is desired. # By default TLS client listener is always started. # #no-tls # Uncomment if no DTLS client listener is desired. # By default DTLS client listener is always started. # #no-dtls # Uncomment if no UDP relay endpoints are allowed. # By default UDP relay endpoints are enabled (like in RFC 5766). # #no-udp-relay # Uncomment if no TCP relay endpoints are allowed. # By default TCP relay endpoints are enabled (like in RFC 6062). # #no-tcp-relay # Uncomment if extra security is desired, # with nonce value having a limited lifetime. # The nonce value is unique for a session. # Set this option to limit the nonce lifetime. # Set it to 0 for unlimited lifetime. # It defaults to 600 secs (10 min) if no value is provided. After that delay, # the client will get 438 error and will have to re-authenticate itself. # #stale-nonce=600 # Uncomment if you want to set the maximum allocation # time before it has to be refreshed. # Default is 3600s. # #max-allocate-lifetime=3600 # Uncomment to set the lifetime for the channel. # Default value is 600 secs (10 minutes). # This value MUST not be changed for production purposes. # #channel-lifetime=600 # Uncomment to set the permission lifetime. # Default to 300 secs (5 minutes). # In production this value MUST not be changed, # however it can be useful for test purposes. # #permission-lifetime=300 # Certificate file. # Use an absolute path or path relative to the # configuration file. # Use PEM file format. # #cert=/usr/local/etc/turn_server_cert.pem cert=/etc/acme.sh/danwin1210.de_ecc/fullchain.cer # Private key file. # Use an absolute path or path relative to the # configuration file. # Use PEM file format. # #pkey=/usr/local/etc/turn_server_pkey.pem pkey=/etc/acme.sh/danwin1210.de_ecc/danwin1210.de.key # Private key file password, if it is in encoded format. # This option has no default value. # #pkey-pwd=... # Allowed OpenSSL cipher list for TLS/DTLS connections. # Default value is "DEFAULT". # cipher-list="HIGH:!PSK:!aNULL:!MD5:!SHA:!CAMELLIA:!AES+SHA256:!AES+SHA384" # CA file in OpenSSL format. # Forces TURN server to verify the client SSL certificates. # By default this is not set: there is no default value and the client # certificate is not checked. # # Example: #CA-file=/etc/ssh/id_rsa.cert # Curve name for EC ciphers, if supported by OpenSSL # library (TLS and DTLS). The default value is prime256v1, # if pre-OpenSSL 1.0.2 is used. With OpenSSL 1.0.2+, # an optimal curve will be automatically calculated, if not defined # by this option. # ec-curve-name=secp521r1 # Use 566 bits predefined DH TLS key. Default size of the key is 2066. # #dh566 # Use 1066 bits predefined DH TLS key. Default size of the key is 2066. # #dh1066 # Use custom DH TLS key, stored in PEM format in the file. # Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file. # #dh-file= # Flag to prevent stdout log messages. # By default, all log messages go to both stdout and to # the configured log file. With this option everything will # go to the configured log only (unless the log file itself is stdout). # #no-stdout-log # Option to set the log file name. # By default, the turnserver tries to open a log file in # /var/log, /var/tmp, /tmp and the current directory # (Whichever file open operation succeeds first will be used). # With this option you can set the definite log file name. # The special names are "stdout" and "-" - they will force everything # to the stdout. Also, the "syslog" name will force everything to # the system log (syslog). # In the runtime, the logfile can be reset with the SIGHUP signal # to the turnserver process. # #log-file=/var/tmp/turn.log # Option to redirect all log output into system log (syslog). # syslog # This flag means that no log file rollover will be used, and the log file # name will be constructed as-is, without PID and date appendage. # This option can be used, for example, together with the logrotate tool. # #simple-log # Enable full ISO-8601 timestamp in all logs. #new-log-timestamp # Set timestamp format (in strftime(1) format) #new-log-timestamp-format "%FT%T%z" # Disabled by default binding logging in verbose log mode to avoid DoS attacks. # Enable binding logging and UDP endpoint logs in verbose log mode. #log-binding # Option to set the "redirection" mode. The value of this option # will be the address of the alternate server for UDP & TCP service in the form of # [:]. The server will send this value in the attribute # ALTERNATE-SERVER, with error 300, on ALLOCATE request, to the client. # Client will receive only values with the same address family # as the client network endpoint address family. # See RFC 5389 and RFC 5766 for the description of ALTERNATE-SERVER functionality. # The client must use the obtained value for subsequent TURN communications. # If more than one --alternate-server option is provided, then the functionality # can be more accurately described as "load-balancing" than a mere "redirection". # If the port number is omitted, then the default port # number 3478 for the UDP/TCP protocols will be used. # Colon (:) characters in IPv6 addresses may conflict with the syntax of # the option. To alleviate this conflict, literal IPv6 addresses are enclosed # in square brackets in such resource identifiers, for example: # [2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 . # Multiple alternate servers can be set. They will be used in the # round-robin manner. All servers in the pool are considered of equal weight and # the load will be distributed equally. For example, if you have 4 alternate servers, # then each server will receive 25% of ALLOCATE requests. A alternate TURN server # address can be used more than one time with the alternate-server option, so this # can emulate "weighting" of the servers. # # Examples: #alternate-server=1.2.3.4:5678 #alternate-server=11.22.33.44:56789 #alternate-server=5.6.7.8 #alternate-server=[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 # Option to set alternative server for TLS & DTLS services in form of # :. If the port number is omitted, then the default port # number 5349 for the TLS/DTLS protocols will be used. See the previous # option for the functionality description. # # Examples: #tls-alternate-server=1.2.3.4:5678 #tls-alternate-server=11.22.33.44:56789 #tls-alternate-server=[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 # Option to suppress TURN functionality, only STUN requests will be processed. # Run as STUN server only, all TURN requests will be ignored. # By default, this option is NOT set. # #stun-only # Option to hide software version. Enhance security when used in production. # Revealing the specific software version of the agent through the # SOFTWARE attribute might allow them to become more vulnerable to # attacks against software that is known to contain security holes. # Implementers SHOULD make usage of the SOFTWARE attribute a # configurable option (https://tools.ietf.org/html/rfc5389#section-16.1.2) # no-software-attribute # Option to suppress STUN functionality, only TURN requests will be processed. # Run as TURN server only, all STUN requests will be ignored. # By default, this option is NOT set. # #no-stun # This is the timestamp/username separator symbol (character) in TURN REST API. # The default value is ':'. # rest-api-separator=: # Flag that can be used to allow peers on the loopback addresses (127.x.x.x and ::1). # This is an extra security measure. # # (To avoid any security issue that allowing loopback access may raise, # the no-loopback-peers option is replaced by allow-loopback-peers.) # # Allow it only for testing in a development environment! # In production it adds a possible security vulnerability, so for security reasons # it is not allowed using it together with empty cli-password. # #allow-loopback-peers # Flag that can be used to disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*). # This is an extra security measure. # no-multicast-peers # Option to set the max time, in seconds, allowed for full allocation establishment. # Default is 60 seconds. # #max-allocate-timeout=60 # Option to allow or ban specific ip addresses or ranges of ip addresses. # If an ip address is specified as both allowed and denied, then the ip address is # considered to be allowed. This is useful when you wish to ban a range of ip # addresses, except for a few specific ips within that range. # # This can be used when you do not want users of the turn server to be able to access # machines reachable by the turn server, but would otherwise be unreachable from the # internet (e.g. when the turn server is sitting behind a NAT) # # Examples: # denied-peer-ip=83.166.64.0-83.166.95.255 # allowed-peer-ip=83.166.68.45 # File name to store the pid of the process. # Default is /var/run/turnserver.pid (if superuser account is used) or # /var/tmp/turnserver.pid . # #pidfile="/var/run/turnserver.pid" # Require authentication of the STUN Binding request. # By default, the clients are allowed anonymous access to the STUN Binding functionality. # #secure-stun # Mobility with ICE (MICE) specs support. # mobility # Allocate Address Family according # If enabled then TURN server allocates address family according the TURN # Client <=> Server communication address family. # (By default Coturn works according RFC 6156.) # !!Warning: Enabling this option breaks RFC6156 section-4.2 (violates use default IPv4)!! # #keep-address-family # User name to run the process. After the initialization, the turnserver process # will attempt to change the current user ID to that user. # #proc-user= # Group name to run the process. After the initialization, the turnserver process # will attempt to change the current group ID to that group. # #proc-group= # Turn OFF the CLI support. # By default it is always ON. # See also options cli-ip and cli-port. # no-cli #Local system IP address to be used for CLI server endpoint. Default value # is 127.0.0.1. # #cli-ip=127.0.0.1 # CLI server port. Default is 5766. # #cli-port=5766 # CLI access password. Default is empty (no password). # For the security reasons, it is recommended that you use the encrypted # form of the password (see the -P command in the turnadmin utility). # # Secure form for password 'qwerty': # #cli-password=$5$79a316b350311570$81df9cfb9af7f5e5a76eada31e7097b663a0670f99a3c07ded3f1c8e59c5658a # # Or unsecure form for the same password: # #cli-password=qwerty # Enable Web-admin support on https. By default it is Disabled. # If it is enabled it also enables a http a simple static banner page # with a small reminder that the admin page is available only on https. # #web-admin # Local system IP address to be used for Web-admin server endpoint. Default value is 127.0.0.1. # #web-admin-ip=127.0.0.1 # Web-admin server port. Default is 8080. # #web-admin-port=8080 # Web-admin server listen on STUN/TURN worker threads # By default it is disabled for security resons! (Not recommended in any production environment!) # #web-admin-listen-on-workers #acme-redirect=http://redirectserver/.well-known/acme-challenge/ # Redirect ACME, i.e. HTTP GET requests matching '^/.well-known/acme-challenge/(.*)' to '$1'. # Default is '', i.e. no special handling for such requests. # Server relay. NON-STANDARD AND DANGEROUS OPTION. # Only for those applications when you want to run # server applications on the relay endpoints. # This option eliminates the IP permissions check on # the packets incoming to the relay endpoints. # #server-relay # Maximum number of output sessions in ps CLI command. # This value can be changed on-the-fly in CLI. The default value is 256. # #cli-max-output-sessions # Set network engine type for the process (for internal purposes). # #ne=[1|2|3] # Do not allow an TLS/DTLS version of protocol # no-tlsv1 no-tlsv1_1 #no-tlsv1_2 use-auth-secret static-auth-secret=YOUR_AUTH_SECRET