mirror of
https://github.com/LadybirdBrowser/ladybird.git
synced 2024-11-22 15:40:19 +00:00
aacb1f0bf4
Now that the old PCI::Device was removed, we can complete the PCI changes by making the PCI::DeviceController to be named PCI::Device. Really the entire purpose and the distinction between the two was about interrupts, but since this is no longer a problem, just rename it to simplify things further.
462 lines
17 KiB
C++
462 lines
17 KiB
C++
/*
|
|
* Copyright (c) 2021, the SerenityOS developers.
|
|
*
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*/
|
|
|
|
#include <AK/MACAddress.h>
|
|
#include <Kernel/Debug.h>
|
|
#include <Kernel/IO.h>
|
|
#include <Kernel/Net/NE2000NetworkAdapter.h>
|
|
#include <Kernel/Sections.h>
|
|
|
|
namespace Kernel {
|
|
|
|
/**
|
|
* The NE2000 is an ancient 10 Mib/s Ethernet network card standard by Novell
|
|
* from the late 80s. Based on National Semiconductor's DP8390 Ethernet chip
|
|
* or compatible, they were known to be extremely bare-bones but also very
|
|
* cheap entry-level cards.
|
|
*
|
|
* QEMU supports them with the ne2k_{isa,pci} devices, physical incarnations
|
|
* were available from different manufacturers for the ISA bus and later on
|
|
* the PCI bus, including:
|
|
* - Realtek's RTL8029
|
|
* - VIA Technologies, Inc.'s VT86C926
|
|
*
|
|
* Official documentation from National Semiconductor includes:
|
|
* - Datasheet "DP8390D/NS32490D NIC Network Interface Controller"
|
|
* - Application Note 874 "Writing Drivers for the DP8390 NIC Family of Ethernet Controllers"
|
|
*
|
|
* This driver supports only the PCI variant.
|
|
*
|
|
* Remember, friends don't let friends use NE2000 network cards :^)
|
|
*/
|
|
|
|
// Page 0 registers
|
|
static constexpr u8 REG_RW_COMMAND = 0x00;
|
|
static constexpr u8 BIT_COMMAND_STOP = (0b1 << 0);
|
|
static constexpr u8 BIT_COMMAND_START = (0b1 << 1);
|
|
static constexpr u8 BIT_COMMAND_TXP = (0b1 << 2);
|
|
static constexpr u8 BIT_COMMAND_DMA_READ = (0b001 << 3);
|
|
static constexpr u8 BIT_COMMAND_DMA_WRITE = (0b010 << 3);
|
|
static constexpr u8 BIT_COMMAND_DMA_SEND = (0b011 << 3);
|
|
static constexpr u8 BIT_COMMAND_DMA_ABORT = (0b100 << 3);
|
|
static constexpr u8 BIT_COMMAND_DMA_FIELD = (0b111 << 3);
|
|
static constexpr u8 BIT_COMMAND_PAGE1 = (0b01 << 6);
|
|
static constexpr u8 BIT_COMMAND_PAGE2 = (0b10 << 6);
|
|
static constexpr u8 BIT_COMMAND_PAGE_FIELD = (0b11 << 6);
|
|
|
|
static constexpr u8 REG_WR_PAGESTART = 0x01;
|
|
static constexpr u8 REG_WR_PAGESTOP = 0x02;
|
|
static constexpr u8 REG_RW_BOUNDARY = 0x03;
|
|
static constexpr u8 REG_RD_TRANSMITSTATUS = 0x04;
|
|
static constexpr u8 REG_WR_TRANSMITPAGE = 0x04;
|
|
static constexpr u8 REG_RD_NCR = 0x05;
|
|
static constexpr u8 REG_WR_TRANSMITBYTECOUNT0 = 0x05;
|
|
static constexpr u8 REG_WR_TRANSMITBYTECOUNT1 = 0x06;
|
|
static constexpr u8 REG_RW_INTERRUPTSTATUS = 0x07;
|
|
static constexpr u8 REG_RD_CRDMA0 = 0x08;
|
|
static constexpr u8 REG_WR_REMOTESTARTADDRESS0 = 0x08;
|
|
static constexpr u8 REG_RD_CRDMA1 = 0x09;
|
|
static constexpr u8 REG_WR_REMOTESTARTADDRESS1 = 0x09;
|
|
static constexpr u8 REG_WR_REMOTEBYTECOUNT0 = 0x0a;
|
|
static constexpr u8 REG_WR_REMOTEBYTECOUNT1 = 0x0b;
|
|
|
|
static constexpr u8 REG_RD_RECEIVESTATUS = 0x0c;
|
|
static constexpr u8 BIT_RECEIVESTATUS_PRX = (0b1 << 0);
|
|
static constexpr u8 BIT_RECEIVESTATUS_CRC = (0b1 << 1);
|
|
static constexpr u8 BIT_RECEIVESTATUS_FAE = (0b1 << 2);
|
|
static constexpr u8 BIT_RECEIVESTATUS_FO = (0b1 << 3);
|
|
static constexpr u8 BIT_RECEIVESTATUS_MPA = (0b1 << 4);
|
|
|
|
static constexpr u8 REG_WR_RECEIVECONFIGURATION = 0x0c;
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_SEP = (0b1 << 0);
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_AR = (0b1 << 1);
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_AB = (0b1 << 2);
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_AM = (0b1 << 3);
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_PRO = (0b1 << 4);
|
|
static constexpr u8 BIT_RECEIVECONFIGURATION_MON = (0b1 << 5);
|
|
|
|
static constexpr u8 REG_RD_FAE_TALLY = 0x0d;
|
|
|
|
static constexpr u8 REG_WR_TRANSMITCONFIGURATION = 0x0d;
|
|
static constexpr u8 BIT_WR_TRANSMITCONFIGURATION_LOOPBACK = (0b10 << 0);
|
|
|
|
static constexpr u8 REG_RD_CRC_TALLY = 0x0e;
|
|
|
|
static constexpr u8 REG_WR_DATACONFIGURATION = 0x0e;
|
|
static constexpr u8 BIT_DATACONFIGURATION_WTS = (0b1 << 0);
|
|
static constexpr u8 BIT_DATACONFIGURATION_BOS = (0b1 << 1);
|
|
static constexpr u8 BIT_DATACONFIGURATION_LS = (0b1 << 2);
|
|
static constexpr u8 BIT_DATACONFIGURATION_FIFO_8B = (0b10 << 5);
|
|
|
|
static constexpr u8 REG_RD_MISS_PKT_TALLY = 0x0f;
|
|
|
|
static constexpr u8 REG_WR_INTERRUPTMASK = 0x0f;
|
|
static constexpr u8 BIT_INTERRUPTMASK_PRX = (0b1 << 0);
|
|
static constexpr u8 BIT_INTERRUPTMASK_PTX = (0b1 << 1);
|
|
static constexpr u8 BIT_INTERRUPTMASK_RXE = (0b1 << 2);
|
|
static constexpr u8 BIT_INTERRUPTMASK_TXE = (0b1 << 3);
|
|
static constexpr u8 BIT_INTERRUPTMASK_OVW = (0b1 << 4);
|
|
static constexpr u8 BIT_INTERRUPTMASK_CNT = (0b1 << 5);
|
|
static constexpr u8 BIT_INTERRUPTMASK_RDC = (0b1 << 6);
|
|
static constexpr u8 BIT_INTERRUPTMASK_RST = (0b1 << 7);
|
|
|
|
static constexpr u8 REG_RW_IOPORT = 0x10;
|
|
|
|
// Page 1 registers
|
|
static constexpr u8 REG_RW_PHYSICALADDRESS0 = 0x01;
|
|
static constexpr u8 REG_RW_CURRENT = 0x07;
|
|
|
|
static constexpr int NE2K_PAGE_SIZE = 256;
|
|
|
|
static constexpr int NE2K_RAM_BEGIN = 16384;
|
|
static constexpr int NE2K_RAM_END = 32768;
|
|
static constexpr int NE2K_RAM_SIZE = NE2K_RAM_END - NE2K_RAM_BEGIN;
|
|
|
|
static constexpr int NE2K_RAM_SEND_BEGIN = 16384;
|
|
static constexpr int NE2K_RAM_SEND_END = 16384 + 6 * NE2K_PAGE_SIZE;
|
|
static constexpr int NE2K_RAM_SEND_SIZE = NE2K_RAM_SEND_END - NE2K_RAM_SEND_BEGIN;
|
|
|
|
static constexpr int NE2K_RAM_RECV_BEGIN = NE2K_RAM_SEND_END;
|
|
static constexpr int NE2K_RAM_RECV_END = NE2K_RAM_END;
|
|
static constexpr int NE2K_RAM_RECV_SIZE = NE2K_RAM_RECV_END - NE2K_RAM_RECV_BEGIN;
|
|
|
|
static_assert(NE2K_RAM_BEGIN % NE2K_PAGE_SIZE == 0);
|
|
static_assert(NE2K_RAM_END % NE2K_PAGE_SIZE == 0);
|
|
static_assert(NE2K_RAM_SEND_BEGIN % NE2K_PAGE_SIZE == 0);
|
|
static_assert(NE2K_RAM_SEND_END % NE2K_PAGE_SIZE == 0);
|
|
static_assert(NE2K_RAM_RECV_BEGIN % NE2K_PAGE_SIZE == 0);
|
|
static_assert(NE2K_RAM_RECV_END % NE2K_PAGE_SIZE == 0);
|
|
|
|
struct [[gnu::packed]] received_packet_header {
|
|
u8 status;
|
|
u8 next_packet_page;
|
|
u16 length;
|
|
};
|
|
|
|
UNMAP_AFTER_INIT RefPtr<NE2000NetworkAdapter> NE2000NetworkAdapter::try_to_initialize(PCI::Address address)
|
|
{
|
|
constexpr auto ne2k_ids = Array {
|
|
PCI::ID { 0x10EC, 0x8029 }, // RealTek RTL-8029(AS)
|
|
|
|
// List of clones, taken from Linux's ne2k-pci.c
|
|
PCI::ID { 0x1050, 0x0940 }, // Winbond 89C940
|
|
PCI::ID { 0x11f6, 0x1401 }, // Compex RL2000
|
|
PCI::ID { 0x8e2e, 0x3000 }, // KTI ET32P2
|
|
PCI::ID { 0x4a14, 0x5000 }, // NetVin NV5000SC
|
|
PCI::ID { 0x1106, 0x0926 }, // Via 86C926
|
|
PCI::ID { 0x10bd, 0x0e34 }, // SureCom NE34
|
|
PCI::ID { 0x1050, 0x5a5a }, // Winbond W89C940F
|
|
PCI::ID { 0x12c3, 0x0058 }, // Holtek HT80232
|
|
PCI::ID { 0x12c3, 0x5598 }, // Holtek HT80229
|
|
PCI::ID { 0x8c4a, 0x1980 }, // Winbond W89C940 (misprogrammed)
|
|
};
|
|
auto id = PCI::get_id(address);
|
|
if (!ne2k_ids.span().contains_slow(id))
|
|
return {};
|
|
u8 irq = PCI::get_interrupt_line(address);
|
|
return adopt_ref_if_nonnull(new (nothrow) NE2000NetworkAdapter(address, irq));
|
|
}
|
|
|
|
UNMAP_AFTER_INIT NE2000NetworkAdapter::NE2000NetworkAdapter(PCI::Address address, u8 irq)
|
|
: PCI::Device(address)
|
|
, IRQHandler(irq)
|
|
, m_io_base(PCI::get_BAR0(pci_address()) & ~3)
|
|
{
|
|
set_interface_name(address);
|
|
|
|
dmesgln("NE2000: Found @ {}", pci_address());
|
|
|
|
m_interrupt_line = PCI::get_interrupt_line(pci_address());
|
|
dmesgln("NE2000: Port base: {}", m_io_base);
|
|
dmesgln("NE2000: Interrupt line: {}", m_interrupt_line);
|
|
|
|
int ram_errors = ram_test();
|
|
dmesgln("NE2000: RAM test {}, got {} byte errors", (ram_errors == 0 ? "OK" : "KO"), ram_errors);
|
|
|
|
reset();
|
|
set_mac_address(m_mac_address);
|
|
dmesgln("NE2000: MAC address: {}", m_mac_address.to_string().characters());
|
|
enable_irq();
|
|
}
|
|
|
|
UNMAP_AFTER_INIT NE2000NetworkAdapter::~NE2000NetworkAdapter()
|
|
{
|
|
}
|
|
|
|
bool NE2000NetworkAdapter::handle_irq(const RegisterState&)
|
|
{
|
|
u8 status = in8(REG_RW_INTERRUPTSTATUS);
|
|
|
|
m_entropy_source.add_random_event(status);
|
|
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Got interrupt, status={:#02x}", status);
|
|
if (status == 0) {
|
|
return false;
|
|
}
|
|
|
|
if (status & BIT_INTERRUPTMASK_PRX) {
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Interrupt for packet received");
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_PTX) {
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Interrupt for packet sent");
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_RXE) {
|
|
u8 fae = in8(REG_RD_FAE_TALLY);
|
|
u8 crc = in8(REG_RD_CRC_TALLY);
|
|
u8 miss = in8(REG_RD_MISS_PKT_TALLY);
|
|
dmesgln("NE2000NetworkAdapter: Packet reception error framing={} crc={} missed={}", fae, crc, miss);
|
|
// TODO: handle counters
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_TXE) {
|
|
dmesgln("NE2000NetworkAdapter: Packet transmission error");
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_OVW) {
|
|
dmesgln("NE2000NetworkAdapter: Ring buffer reception overflow error");
|
|
// TODO: handle counters
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_CNT) {
|
|
dmesgln("NE2000NetworkAdapter: Counter overflow error");
|
|
// TODO: handle counters
|
|
}
|
|
if (status & BIT_INTERRUPTMASK_RST) {
|
|
dmesgln("NE2000NetworkAdapter: NIC requires reset due to packet reception overflow");
|
|
// TODO: proper reset procedure
|
|
reset();
|
|
}
|
|
|
|
receive();
|
|
m_wait_queue.wake_all();
|
|
|
|
out8(REG_RW_INTERRUPTSTATUS, status);
|
|
return true;
|
|
}
|
|
|
|
UNMAP_AFTER_INIT int NE2000NetworkAdapter::ram_test()
|
|
{
|
|
IOAddress io(PCI::get_BAR0(pci_address()) & ~3);
|
|
int errors = 0;
|
|
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_DMA_ABORT | BIT_COMMAND_STOP);
|
|
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
|
|
out8(REG_WR_DATACONFIGURATION, BIT_DATACONFIGURATION_FIFO_8B | BIT_DATACONFIGURATION_WTS);
|
|
#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
|
|
out8(REG_WR_DATACONFIGURATION, BIT_DATACONFIGURATION_FIFO_8B | BIT_DATACONFIGURATION_BOS | BIT_DATACONFIGURATION_WTS);
|
|
#else
|
|
# error Unknown byte order
|
|
#endif
|
|
out8(REG_WR_REMOTEBYTECOUNT0, 0x00);
|
|
out8(REG_WR_REMOTEBYTECOUNT1, 0x00);
|
|
out8(REG_WR_RECEIVECONFIGURATION, BIT_RECEIVECONFIGURATION_MON);
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_DMA_ABORT | BIT_COMMAND_START);
|
|
auto buffer = ByteBuffer::create_uninitialized(NE2K_RAM_SIZE);
|
|
|
|
const u8 patterns[3] = { 0x5a, 0xff, 0x00 };
|
|
for (int i = 0; i < 3; ++i) {
|
|
for (size_t j = 0; j < buffer.size(); ++j)
|
|
buffer[j] = patterns[i];
|
|
|
|
rdma_write(NE2K_RAM_BEGIN, buffer);
|
|
rdma_read(NE2K_RAM_BEGIN, buffer);
|
|
|
|
for (size_t j = 0; j < buffer.size(); ++j) {
|
|
if (buffer[j] != patterns[i]) {
|
|
if (errors < 16)
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Bad adapter RAM @ {} expected={} got={}", PhysicalAddress(NE2K_RAM_BEGIN + j), patterns[i], buffer[j]);
|
|
else if (errors == 16)
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Too many RAM errors, silencing further output");
|
|
errors++;
|
|
}
|
|
}
|
|
}
|
|
|
|
return errors;
|
|
}
|
|
|
|
void NE2000NetworkAdapter::reset()
|
|
{
|
|
const u8 interrupt_mask = BIT_INTERRUPTMASK_PRX | BIT_INTERRUPTMASK_PTX | BIT_INTERRUPTMASK_RXE | BIT_INTERRUPTMASK_TXE | BIT_INTERRUPTMASK_OVW | BIT_INTERRUPTMASK_CNT;
|
|
u8 prom[32];
|
|
|
|
// Taken from DP8390D's datasheet section 11.0, "Initialization Procedures"
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_DMA_ABORT | BIT_COMMAND_STOP);
|
|
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
|
|
out8(REG_WR_DATACONFIGURATION, BIT_DATACONFIGURATION_FIFO_8B | BIT_DATACONFIGURATION_WTS);
|
|
#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
|
|
out8(REG_WR_DATACONFIGURATION, BIT_DATACONFIGURATION_FIFO_8B | BIT_DATACONFIGURATION_BOS | BIT_DATACONFIGURATION_WTS);
|
|
#else
|
|
# error Unknown byte order
|
|
#endif
|
|
out8(REG_WR_REMOTEBYTECOUNT0, 0x00);
|
|
out8(REG_WR_REMOTEBYTECOUNT1, 0x00);
|
|
out8(REG_WR_RECEIVECONFIGURATION, BIT_RECEIVECONFIGURATION_AB | BIT_RECEIVECONFIGURATION_AR);
|
|
out8(REG_WR_TRANSMITCONFIGURATION, BIT_WR_TRANSMITCONFIGURATION_LOOPBACK);
|
|
m_ring_read_ptr = NE2K_RAM_RECV_BEGIN >> 8;
|
|
out8(REG_WR_PAGESTART, NE2K_RAM_RECV_BEGIN >> 8);
|
|
out8(REG_RW_BOUNDARY, NE2K_RAM_RECV_BEGIN >> 8);
|
|
out8(REG_WR_PAGESTOP, NE2K_RAM_RECV_END >> 8);
|
|
out8(REG_RW_INTERRUPTSTATUS, 0xff);
|
|
out8(REG_WR_INTERRUPTMASK, interrupt_mask);
|
|
rdma_read(0, Bytes(prom, sizeof(prom)));
|
|
for (int i = 0; i < 6; i++) {
|
|
m_mac_address[i] = prom[i * 2];
|
|
}
|
|
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_PAGE1 | BIT_COMMAND_DMA_ABORT | BIT_COMMAND_STOP);
|
|
for (int i = 0; i < 6; i++) {
|
|
out8(REG_RW_PHYSICALADDRESS0 + i, m_mac_address[i]);
|
|
}
|
|
out8(REG_RW_CURRENT, NE2K_RAM_RECV_BEGIN >> 8);
|
|
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_DMA_ABORT | BIT_COMMAND_START);
|
|
out8(REG_WR_TRANSMITCONFIGURATION, 0xe0);
|
|
}
|
|
|
|
void NE2000NetworkAdapter::rdma_read(size_t address, Bytes payload)
|
|
{
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: DMA read @ {} length={}", PhysicalAddress(address), payload.size());
|
|
|
|
u8 command = in8(REG_RW_COMMAND) & ~(BIT_COMMAND_PAGE_FIELD | BIT_COMMAND_DMA_FIELD);
|
|
out8(REG_RW_COMMAND, command | BIT_COMMAND_DMA_ABORT);
|
|
out8(REG_RW_INTERRUPTSTATUS, BIT_INTERRUPTMASK_RDC);
|
|
|
|
out8(REG_WR_REMOTEBYTECOUNT0, payload.size());
|
|
out8(REG_WR_REMOTEBYTECOUNT1, payload.size() >> 8);
|
|
out8(REG_WR_REMOTESTARTADDRESS0, address);
|
|
out8(REG_WR_REMOTESTARTADDRESS1, address >> 8);
|
|
|
|
command = in8(REG_RW_COMMAND) & ~(BIT_COMMAND_DMA_FIELD);
|
|
out8(REG_RW_COMMAND, command | BIT_COMMAND_DMA_READ);
|
|
|
|
for (size_t i = 0; i < payload.size(); i += 2) {
|
|
u16 data = in16(REG_RW_IOPORT);
|
|
payload[i] = data;
|
|
if (i != payload.size() - 1)
|
|
payload[i + 1] = data >> 8;
|
|
}
|
|
|
|
while (!(in8(REG_RW_INTERRUPTSTATUS) & BIT_INTERRUPTMASK_RDC))
|
|
;
|
|
}
|
|
|
|
void NE2000NetworkAdapter::rdma_write(size_t address, ReadonlyBytes payload)
|
|
{
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: DMA write @ {} length={}", PhysicalAddress(address), payload.size());
|
|
|
|
u8 command = in8(REG_RW_COMMAND) & ~(BIT_COMMAND_PAGE_FIELD | BIT_COMMAND_DMA_FIELD);
|
|
out8(REG_RW_COMMAND, command | BIT_COMMAND_DMA_ABORT);
|
|
out8(REG_RW_INTERRUPTSTATUS, BIT_INTERRUPTMASK_RDC);
|
|
|
|
out8(REG_WR_REMOTEBYTECOUNT0, payload.size());
|
|
out8(REG_WR_REMOTEBYTECOUNT1, payload.size() >> 8);
|
|
out8(REG_WR_REMOTESTARTADDRESS0, address);
|
|
out8(REG_WR_REMOTESTARTADDRESS1, address >> 8);
|
|
|
|
command = in8(REG_RW_COMMAND) & ~(BIT_COMMAND_DMA_FIELD);
|
|
out8(REG_RW_COMMAND, command | BIT_COMMAND_DMA_WRITE);
|
|
|
|
for (size_t i = 0; i < payload.size(); i += 2) {
|
|
u16 data = payload[i];
|
|
if (i != payload.size() - 1)
|
|
data |= payload[i + 1] << 8;
|
|
out16(REG_RW_IOPORT, data);
|
|
}
|
|
|
|
while (!(in8(REG_RW_INTERRUPTSTATUS) & BIT_INTERRUPTMASK_RDC))
|
|
;
|
|
}
|
|
|
|
void NE2000NetworkAdapter::send_raw(ReadonlyBytes payload)
|
|
{
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Sending packet length={}", payload.size());
|
|
|
|
if (payload.size() > NE2K_RAM_SEND_SIZE) {
|
|
dmesgln("NE2000NetworkAdapter: Packet to send was too big; discarding");
|
|
return;
|
|
}
|
|
|
|
while (in8(REG_RW_COMMAND) & BIT_COMMAND_TXP)
|
|
m_wait_queue.wait_forever("NE2000NetworkAdapter");
|
|
|
|
disable_irq();
|
|
size_t packet_size = payload.size();
|
|
if (packet_size < 64)
|
|
packet_size = 64;
|
|
rdma_write(NE2K_RAM_SEND_BEGIN, payload);
|
|
out8(REG_WR_TRANSMITPAGE, NE2K_RAM_SEND_BEGIN >> 8);
|
|
out8(REG_WR_TRANSMITBYTECOUNT0, packet_size);
|
|
out8(REG_WR_TRANSMITBYTECOUNT1, packet_size >> 8);
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_DMA_ABORT | BIT_COMMAND_TXP | BIT_COMMAND_START);
|
|
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Packet submitted for transmission");
|
|
|
|
enable_irq();
|
|
}
|
|
|
|
void NE2000NetworkAdapter::receive()
|
|
{
|
|
while (true) {
|
|
out8(REG_RW_COMMAND, BIT_COMMAND_PAGE1 | in8(REG_RW_COMMAND));
|
|
u8 current = in8(REG_RW_CURRENT);
|
|
out8(REG_RW_COMMAND, in8(REG_RW_COMMAND) & ~BIT_COMMAND_PAGE_FIELD);
|
|
if (m_ring_read_ptr == current)
|
|
break;
|
|
|
|
size_t header_address = m_ring_read_ptr << 8;
|
|
received_packet_header header;
|
|
rdma_read(header_address, Bytes(reinterpret_cast<u8*>(&header), sizeof(header)));
|
|
|
|
bool packet_ok = header.status & BIT_RECEIVESTATUS_PRX;
|
|
dbgln_if(NE2000_DEBUG, "NE2000NetworkAdapter: Packet received {} length={}", (packet_ok ? "intact" : "damaged"), header.length);
|
|
|
|
if (packet_ok) {
|
|
auto packet = NetworkByteBuffer::create_uninitialized(sizeof(received_packet_header) + header.length);
|
|
int bytes_left = packet.size();
|
|
int current_offset = 0;
|
|
int ring_offset = header_address;
|
|
|
|
while (bytes_left > 0) {
|
|
int copy_size = min(bytes_left, NE2K_PAGE_SIZE);
|
|
rdma_read(ring_offset, packet.span().slice(current_offset, copy_size));
|
|
current_offset += copy_size;
|
|
ring_offset += copy_size;
|
|
bytes_left -= copy_size;
|
|
if (ring_offset == NE2K_RAM_RECV_END)
|
|
ring_offset = NE2K_RAM_RECV_BEGIN;
|
|
}
|
|
|
|
did_receive(packet.span().slice(sizeof(received_packet_header)));
|
|
}
|
|
|
|
if (header.next_packet_page == (NE2K_RAM_RECV_BEGIN >> 8))
|
|
out8(REG_RW_BOUNDARY, (NE2K_RAM_RECV_END >> 8) - 1);
|
|
else
|
|
out8(REG_RW_BOUNDARY, header.next_packet_page - 1);
|
|
m_ring_read_ptr = header.next_packet_page;
|
|
}
|
|
}
|
|
|
|
void NE2000NetworkAdapter::out8(u16 address, u8 data)
|
|
{
|
|
m_io_base.offset(address).out(data);
|
|
}
|
|
|
|
void NE2000NetworkAdapter::out16(u16 address, u16 data)
|
|
{
|
|
m_io_base.offset(address).out(data);
|
|
}
|
|
|
|
u8 NE2000NetworkAdapter::in8(u16 address)
|
|
{
|
|
u8 data = m_io_base.offset(address).in<u8>();
|
|
return data;
|
|
}
|
|
|
|
u16 NE2000NetworkAdapter::in16(u16 address)
|
|
{
|
|
return m_io_base.offset(address).in<u16>();
|
|
}
|
|
|
|
}
|