ladybird/Kernel/init.cpp

/*
 * Copyright (c) 2018-2020, Andreas Kling <kling@serenityos.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 *    this list of conditions and the following disclaimer in the documentation
 *    and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <AK/Types.h>
#include <Kernel/ACPI/DynamicParser.h>
#include <Kernel/ACPI/Initialize.h>
#include <Kernel/ACPI/MultiProcessorParser.h>
#include <Kernel/Arch/i386/CPU.h>
#include <Kernel/CMOS.h>
#include <Kernel/CommandLine.h>
#include <Kernel/Devices/BXVGADevice.h>
#include <Kernel/Devices/FullDevice.h>
#include <Kernel/Devices/I8042Controller.h>
#include <Kernel/Devices/MBVGADevice.h>
#include <Kernel/Devices/NullDevice.h>
#include <Kernel/Devices/RandomDevice.h>
#include <Kernel/Devices/SB16.h>
#include <Kernel/Devices/SerialDevice.h>
#include <Kernel/Devices/UHCIController.h>
#include <Kernel/Devices/VMWareBackdoor.h>
#include <Kernel/Devices/ZeroDevice.h>
#include <Kernel/FileSystem/Ext2FileSystem.h>
#include <Kernel/FileSystem/VirtualFileSystem.h>
#include <Kernel/Heap/SlabAllocator.h>
#include <Kernel/Heap/kmalloc.h>
#include <Kernel/Interrupts/APIC.h>
#include <Kernel/Interrupts/InterruptManagement.h>
#include <Kernel/Interrupts/PIC.h>
#include <Kernel/KSyms.h>
#include <Kernel/Multiboot.h>
#include <Kernel/Net/E1000NetworkAdapter.h>
#include <Kernel/Net/LoopbackAdapter.h>
#include <Kernel/Net/NetworkTask.h>
#include <Kernel/Net/RTL8139NetworkAdapter.h>
#include <Kernel/PCI/Access.h>
#include <Kernel/PCI/Initializer.h>
#include <Kernel/Process.h>
#include <Kernel/RTC.h>
#include <Kernel/Random.h>
#include <Kernel/Scheduler.h>
#include <Kernel/Storage/StorageManagement.h>
#include <Kernel/TTY/PTYMultiplexer.h>
#include <Kernel/TTY/VirtualConsole.h>
#include <Kernel/Tasks/FinalizerTask.h>
#include <Kernel/Tasks/SyncTask.h>
#include <Kernel/Time/TimeManagement.h>
#include <Kernel/VM/MemoryManager.h>

// Defined in the linker script
typedef void (*ctor_func_t)();
extern ctor_func_t start_heap_ctors;
extern ctor_func_t end_heap_ctors;
extern ctor_func_t start_ctors;
extern ctor_func_t end_ctors;

extern u32 __stack_chk_guard;
u32 __stack_chk_guard;

namespace Kernel {

[[noreturn]] static void init_stage2(void*);
static void setup_serial_debug();

// boot.S expects these functions precisely this this. We declare them here
// to ensure the signatures don't accidentally change.
extern "C" void init_finished(u32 cpu);
extern "C" [[noreturn]] void init_ap(u32 cpu, Processor* processor_info);
extern "C" [[noreturn]] void init();

VirtualConsole* tty0;

static Processor s_bsp_processor; // global but let's keep it "private"

// SerenityOS Kernel C++ entry point :^)
//
// This is where C++ execution begins, after boot.S transfers control here.
//
// The purpose of init() is to start multi-tasking. It does the bare minimum
// amount of work needed to start the scheduler.
//
// Once multi-tasking is ready, we spawn a new thread that starts in the
// init_stage2() function. Initialization continues there.

extern "C" [[noreturn]] void init()
{
    setup_serial_debug();

    // We need to copy the command line before kmalloc is initialized,
    // as it may overwrite parts of multiboot!
    CommandLine::early_initialize(reinterpret_cast<const char*>(low_physical_to_virtual(multiboot_info_ptr->cmdline)));

    s_bsp_processor.early_initialize(0);

    // Invoke the constructors needed for the kernel heap
    for (ctor_func_t* ctor = &start_heap_ctors; ctor < &end_heap_ctors; ctor++)
        (*ctor)();
    kmalloc_init();
    slab_alloc_init();

    s_bsp_processor.initialize(0);

    CommandLine::initialize();
    MemoryManager::initialize(0);

    // Invoke all static global constructors in the kernel.
    // Note that we want to do this as early as possible.
    for (ctor_func_t* ctor = &start_ctors; ctor < &end_ctors; ctor++)
        (*ctor)();

    APIC::initialize();
    InterruptManagement::initialize();
    ACPI::initialize();

    VFS::initialize();
    I8042Controller::initialize();
    Console::initialize();

    klog() << "Starting SerenityOS...";

    __stack_chk_guard = get_fast_random<u32>();

    TimeManagement::initialize(0);

    NullDevice::initialize();
    if (!get_serial_debug())
        new SerialDevice(SERIAL_COM1_ADDR, 64);
    new SerialDevice(SERIAL_COM2_ADDR, 65);
    new SerialDevice(SERIAL_COM3_ADDR, 66);
    new SerialDevice(SERIAL_COM4_ADDR, 67);

    VirtualConsole::initialize();
    tty0 = new VirtualConsole(0);
    for (unsigned i = 1; i < s_max_virtual_consoles; i++) {
        new VirtualConsole(i);
    }
    VirtualConsole::switch_to(0);

    Process::initialize();
    Scheduler::initialize();

    {
        RefPtr<Thread> init_stage2_thread;
        Process::create_kernel_process(init_stage2_thread, "init_stage2", init_stage2, nullptr);
        // We need to make sure we drop the reference for init_stage2_thread
        // before calling into Scheduler::start, otherwise we will have a
        // dangling Thread that never gets cleaned up
    }

    Scheduler::start();
    ASSERT_NOT_REACHED();
}

//
// This is where C++ execution begins for APs, after boot.S transfers control here.
//
// The purpose of init_ap() is to initialize APs for multi-tasking.
//
extern "C" [[noreturn]] void init_ap(u32 cpu, Processor* processor_info)
{
    processor_info->early_initialize(cpu);

    processor_info->initialize(cpu);
    MemoryManager::initialize(cpu);

    Scheduler::set_idle_thread(APIC::the().get_idle_thread(cpu));

    Scheduler::start();
    ASSERT_NOT_REACHED();
}

//
// This method is called once a CPU enters the scheduler and its idle thread
// At this point the initial boot stack can be freed
//
extern "C" void init_finished(u32 cpu)
{
    if (cpu == 0) {
        // TODO: we can reuse the boot stack, maybe for kmalloc()?
    } else {
        APIC::the().init_finished(cpu);
        TimeManagement::initialize(cpu);
    }
}

void init_stage2(void*)
{
    if (APIC::initialized() && APIC::the().enabled_processor_count() > 1) {
        // We can't start the APs until we have a scheduler up and running.
        // We need to be able to process ICI messages, otherwise another
        // core may send too many and end up deadlocking once the pool is
        // exhausted
        APIC::the().boot_aps();
    }

    SyncTask::spawn();
    FinalizerTask::spawn();

    PCI::initialize();

    bool text_mode = kernel_command_line().lookup("boot_mode").value_or("graphical") == "text";

    if (text_mode) {
        dbg() << "Text mode enabled";
    } else {
        bool bxvga_found = false;
        PCI::enumerate([&](const PCI::Address&, PCI::ID id) {
            if ((id.vendor_id == 0x1234 && id.device_id == 0x1111) || (id.vendor_id == 0x80ee && id.device_id == 0xbeef))
                bxvga_found = true;
        });

        if (bxvga_found) {
            BXVGADevice::initialize();
        } else {
            if (multiboot_info_ptr->framebuffer_type == MULTIBOOT_FRAMEBUFFER_TYPE_RGB || multiboot_info_ptr->framebuffer_type == MULTIBOOT_FRAMEBUFFER_TYPE_EGA_TEXT) {
                new MBVGADevice(
                    PhysicalAddress((u32)(multiboot_info_ptr->framebuffer_addr)),
                    multiboot_info_ptr->framebuffer_pitch,
                    multiboot_info_ptr->framebuffer_width,
                    multiboot_info_ptr->framebuffer_height);
            } else {
                BXVGADevice::initialize();
            }
        }
    }

    UHCIController::detect();

    E1000NetworkAdapter::detect();
    RTL8139NetworkAdapter::detect();

    LoopbackAdapter::the();

    Syscall::initialize();

    new ZeroDevice;
    new FullDevice;
    new RandomDevice;
    PTYMultiplexer::initialize();
    new SB16;
    VMWareBackdoor::the(); // don't wait until first mouse packet

    bool force_pio = kernel_command_line().contains("force_pio");

    auto root = kernel_command_line().lookup("root").value_or("/dev/hda");

    StorageManagement::initialize(root, force_pio);
    if (!VFS::the().mount_root(StorageManagement::the().root_filesystem())) {
        klog() << "VFS::mount_root failed";
        Processor::halt();
    }

    Process::current()->set_root_directory(VFS::the().root_custody());

    load_kernel_symbol_table();

    int error;

    // FIXME: It would be nicer to set the mode from userspace.
    tty0->set_graphical(!text_mode);
    RefPtr<Thread> thread;
    auto userspace_init = kernel_command_line().lookup("init").value_or("/bin/SystemServer");
    auto init_args = kernel_command_line().lookup("init_args").value_or("").split(',');
    if (!init_args.is_empty())
        init_args.prepend(userspace_init);
    Process::create_user_process(thread, userspace_init, (uid_t)0, (gid_t)0, ProcessID(0), error, move(init_args), {}, tty0);
    if (error != 0) {
        klog() << "init_stage2: error spawning SystemServer: " << error;
        Processor::halt();
    }
    thread->set_priority(THREAD_PRIORITY_HIGH);

    NetworkTask::spawn();

    Process::current()->sys$exit(0);
    ASSERT_NOT_REACHED();
}

void setup_serial_debug()
{
    // serial_debug will output all the klog() and dbg() data to COM1 at
    // 8-N-1 57600 baud. this is particularly useful for debugging the boot
    // process on live hardware.
    //
    // note: it must be the first option in the boot cmdline.
    u32 cmdline = low_physical_to_virtual(multiboot_info_ptr->cmdline);
    if (cmdline && StringView(reinterpret_cast<const char*>(cmdline)).starts_with("serial_debug"))
        set_serial_debug(true);
}

extern "C" {
multiboot_info_t* multiboot_info_ptr;
}

// Define some Itanium C++ ABI methods to stop the linker from complaining.
// If we actually call these something has gone horribly wrong
void* __dso_handle __attribute__((visibility("hidden")));

}